Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

  • Include: Track Balancer Standard Hardware and side top & bottom seals.
  • Replacement for Utility Trailer s/n CS39865
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

  • For door thickness 2"
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • Adjustable spreader bar assembly included.
    • .......more details
M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

  • Upgrades added when purchasing a commercial operator
IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

  • Two sets of screws are required for each bracket installed
1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
A10U49

Erone Long Range UHF Reader U4GO 33FT

  • The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
  • Stand-alone or Wiegand mode
  • Up to 33' (10 m) read range
  • Detects vehicles up to 50 mph (80 Km/h)
  • Includes receiver power supply and mounting bracket
02-401M

LiftMaster 1-Button Control Station

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
  • Sends the door to the full open position. Perfect for time sensitive situations.
1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

  • Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
  • Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
  • Bearings: 2 hardened steel disc bearings
  • Finish: Complete hinge black enamel
  • Fasteners are not included
2300-925-BLACK

Linear Operator Cover Only Black

  • The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
  • Made of Polyethylene
3257

Whiting General Purpose Bottom Seal #80841

  • Quote required prior to sale to ensure correct fit
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)
H11G09-SS

Hinge #9 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-6-INSTALLED
5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

  • Chain pack only
  • TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors
8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

  • Keychain style remote
  • Black
  • Not compatible with HomeLink
  • Dimensions: 2.5 x 1.5 x .5 inches
BCSI-PM22

Pivin Drapeau Hex Bolt 3/8-16" *** Price by Quote Only

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
041-0035

LiftMaster Chain Spreader and Sprocket

  • For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
  • Complete kit includes: Chain Spreader Sprocket and C-Clip
  • This replacement part is compatible with the following models: 8580WLB
GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

  • Galvanized Steel 16-ga (1.42mm) thick.
PUSH180

Manaras Contact Block NO XB4/XB5

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
HAE00052

Linear Main Cover LDCO

  • Replacement cover only
Replacement Parts List
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
11442

Limit Switch w/Roller Wheel Lever for MBAR

  • Used on M7BAR Ops
400BL

4" Light Brush Insert 6ft Long

  • Polypropylene bristles
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
NO_HAR-11

EMX Detector Only No Wiring Harness Included

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet
GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

  • Up charge for extra lead wire
7601351

FAAC Capacitor 8MF for 220V *** Price on Request

16-2101

LiftMaster Vbelt 3L 25" 3L250 *** NLA

  • This is a replacement Belt (3L250).
  • Compatible with LiftMaster® Model SW470GL Swing Operators
  • Also know as: K16-2101 G162101 162101
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

  • 5 complete curtainlok's with fasteners
  • Curtain Lok™ for 1/4” thick Rubber Doors
ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

SMR7620TP5

Telco Thru Beam Receiver M18

  • Supply voltage: 10 - 30 V dc
  • Control Feature: Sensitivity pot. and light/dark switch
  • Sensing range: 20 m
  • Output Status: N.C./N.O.
  • Housing: 18 x 1 Plastic
  • 5M cable
    • .......more details
51115

Doorlec Fire Release System

  • For fire rated rolling service doors connecting to existing dropout fusible link device
  • For GH and Belt Drive operators
LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

  • The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
  • Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
  • The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
  • Backwards compatible with CS303 sensors
1634-134-W

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 35-1/8" x 17-1/8"
  • Cut-out size: 33-7/8" x 15-7/8"
  • Vision area: 31-3/4" x 13-11/16"
  • Different glass options and frame colours are available upon request
    • .......more details
BCH501L5-LH

LiftMaster Hoist Op. with Carwash Mod.and Brake 1/2 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH501-LH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes and brake
SSZP15-6

Solid Shaft 1" Keyed Zinc Plated 15'-6"

G3353

GDI Chain Per 2 ft Length

  • If over 10' loop length is required
CAPXLTK

LiftMaster Trim Kit and Back Kit

  • Trim ring and back box for CAPXL.
  • Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
  • Dimensions: Outer Trim – 23.75” x 19.375”
BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
TRACK-SET-3-134-8

3" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

  • OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
  • Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
  • Randomly keyed
658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

  • Outdoor Enclosure (NEMA 4/12)
  • Includes 10 feet of signal hose outdoor air switch and hose plug
  • OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.
TSTRIP001

Manaras 12-Pole Terminal Strip

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P2
  • Reverse side is #431 Bright White
Colour chart
CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

111-0061

RW Box Track #33 Black 10ft

  • Finish: Black enamel
426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

ET1820-1

Carlo Gavazzi Through Beam Emitter 20M Plug

  • High power through-beam photoelectric switch.
  • Range up to 20 m.
  • Easily adjustable sensitivity with 270° potentiometer.
  • LED output indication.
  • Precise detection through narrow beam.
  • Short M 18 metal housing for heavy duty applications. IP 67.
    • .......more details
308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
MM00082

Micanan Solenoid Support Bracket (MSI0085)

M7BAR-R10V1-PKG

NICE Barrier Gate Op. w/Heater Arm Package 110VAC

  • 16 to 23 ft Arm Length
  • 120VAC Power Source / 24VDC Operational Voltage
  • Open/Closes in 6 - 10 seconds
  • 200 Cycles/Hour
  • Aluminum arm with red adhesive reflector and optional lights/bumper strips
  • ETL Listed (UL325)
    • .......more details
.177-2-R

Cut-to-Length Torsion Spring .177 x 2" Right Hand Wound Gold

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
FLO2R-SA

NICE 2-btn Keychain Remote 433.92 MHz

  • Rolling code No internal dip switches programming with the reciever
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys keyed alike
  • H=7" W=2-3/4" D=2-3/4"
8030279

Marantec Replacement Belt with Tab for 8ft Door

  • Overall Belt Length = 250"
  • Travel limit tab attached to belt
  • For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
  • Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced
CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

  • Works on BCSI-HV 240 single phase
7515

Whiting Handle Keeper for #77 Lock

K75-10214

LiftMaster Straight Door Arm Kit

  • For use with various LiftMaster® Commercial Door Operators.
  • Complete kit includes: straight arm emergency rope with handle and warning label
  • Also known as: 41K3681 7510214 453405 75-10214 305105003 1C3681 1C3428
QUANTUM-R16

Garex Ready to Install Door Special Order

  • R16 Smooth Finish - Available in 20 GA steel white only - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

  • Complete Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
  • Price varies according to size
15

Whiting Truck Door Center Hinge