Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RESET002

Manaras Resettable Overload Fuse 5A 1 Phase

EL2000SSPKT

LiftMaster Pedestal Mounting Kit for EL2000SS

  • Compatible with model EL2000SS only.
  • Kit allows you to mount an EL2000SS unit onto a standard gooseneck pedestal.
  • Kit includes a mounting plate with gasket and hardware.
88824

Marantec Sprocket Holder Assbly For Heavy Duty 1.2mm Belt Rails Only

  • Compatible with Marantec Heavy Duty (1.2mm - 18 gauge) 2-Piece & Standard Belt Rail
  • Compatible with Marantec models: LC1000 M4500 M4500e M4500eI M4700 M4700e M4700eI M4900e Q7500 Q7700 Q7900 Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy LC and Synergy Solo
  • Compatible with Marantec belt rails: M13-1207B M13-1208B M13-1210B M13-1212B. M13-1214B
LEVER063

Manaras Carrier Disconnect Bracket

OTH-6113-AM06-M

Manaras Silencio APT Operator 3/4HP 120V 1Ph ECB Monitored with Photoeyes

  • The OTH-AM06 is a silent apartment style low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 100 cycles per day
  • 3/4 HP operators come with # 41 roller chain
  • Ceiling Mount only 7.36" headroom clearance required below the tracks
  • UL325
    • .......more details
K10-34758-2

LiftMaster Battery Tray CSL24U

  • For use with CSL24U
  • Also known as: K75-34986-2
D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
HW-KEY-SQ-316058

Lynx Straight Key 3/16" x 5/8" Long

71-EB120

LiftMaster External Brake Solenoid 120V

  • Same as K71-EB120 71B120X
50-LW1000BLK

Loop Wire Black 1000ft 18AWG

WHITING-RV-INS

Whiting Stainless Steel Rivet/Mono Bolt Option for ColdSaver Door

  • Upgrade option
WHITING-PWCS

Whiting White Urethane Topcoat Option For ColdSaver Door Panel

  • This is an option when ordering a panel
K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
169026

Euro Center Hinge (25233) Zinc Plated

  • Steel Zinc plated
  • Thickness: 0.098"
  • Pin: 0.276"
  • Mounting holes 0.275"
  • Use with Euro side hinge #169027
OSH-6533-CONT-L

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
HYBRID-BLK-20

Residential Side & Top PVC/Aluminum W/S with cap 20' Long (241") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-10

Residential Side & Top PVC/Aluminum W/S with cap 10' Long (121") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-8

Residential Side & Top PVC/Aluminum W/S with cap 8' Long (97") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
41C0589-2

LiftMaster Belt Cap Retainer

  • Also known as: 041C589-2 41A537 41C589-2
  • For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
  • Complete kit includes: Sprocket sprocket cover and replacement screws
SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

  • Cones for 6" ID Right Hand Wound spring wire
  • Not universal thread
K86-RP10-208

LiftMaster Roll Pin 5/16" x 2-1/2"

  • Also known as: G86RP10208 86RP10208 86-RP10-208
10-10930

LiftMaster External Disconnect Bracket

  • Also known as: 10-7006 G107006 107006 1010930
N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
E/1929/073

Automatic Systems Round Arm Ass'y 19'-8" (BL229)

  • Used on the BL229 gate op.
1224-1-5/8"-BLK

Elton Commercial Window for Flush Doors 1-5/8" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
.177_2"-RH

Torsion Spring .177 x 2" x 12ft RH Gold

  • Wire size: .177
  • Inside diameter: 2"
  • Length: 12 ft
K204A0276

LiftMaster Transformer 50/60Hz 200va 575V

  • Transformer (575VAC 200VA). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
  • 575V/200VA
  • Sturdy housing canopy
  • External winding micro-tabs
  • Reinforced fastener flanges
  • Compatible with LiftMaster SL585105U SL585151U slide gate operators
    • .......more details
BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing C16-32F
  • EBF6" offset USA Style
  • 1" ID
19-50HL-NP

Half (Offset) Link #50 Nickel Plated

  • For #50 chain
19-41HL-NP

Half (Offset) Link #41 Nickel Plated

  • For #41 chain
19-60HL-NP

Half (Offset) Link #60 Nickel Plated

  • For #60 chain
19-80HL-NP

Half (Offset) Link #80 Nickel Plated

  • For #80 chain
MOUNTSHAFT018C

Manaras Limit Shaft Kit MGH Pre-2011 up to 1.5HP

  • For MGH pre-2011 up to 1.5 HP
GH-321-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P Contactor Model (Hard Wired)

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

  • Complete brake kit with solenoid
CB14B0500-KOR

Cable 1/4" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
OPH-6233-ECB-LH

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
MOTOR009-WIRED

Manaras Electric Motor1/2HP 120/240V 1PH

  • Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
  • 1725 rpm built-in reset
  • Wired either 120V or 240V ECB
MF00048

Micanan Round Head Slotted Bolt 1/4-20UNCx1-1/4" Full Thread

  • Used on various Micanan operators
  • 2 required per operator
MM00082

Micanan Solenoid Support Bracket (MSI0085)

2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

29203

Doorlec Transformer 230V pr 120V sec 35VA

  • 230V prImary 120V secondary 35VA
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
CP-SH-58-1038-LS

Lynx Limit Shaft Only

  • 5/8" x 10-3/8"
  • Used on most of Lynx operators
PRO-R4918

Linear Magnetic Rev Counter PCB Assbly 3KXLS 4KXLS R4918

  • Linear Professional series
MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
MGH-6533-ECB-RH

Manaras 3/4 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
.262_6"-LH

Torsion Spring .262 x 6" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 6"
  • Length: 12 ft
  • Special Order Minimum lead time 3 weeks
MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

  • Continuous duty C-flange ODP 60Hz
SPAMG095A000

NICE Upper Cover Kit MBAR5

41B7418

LiftMaster Wire Harness Dual Light

  • Wire Harness Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Garage Door Openers; manufactured 2005 to 2013 that feature a dual light system
41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
510.4228.07

Whiting Double End Hinges DF SS/Nylon - 7 Panel Door Add-On Option

  • Add-on option when ordering door.
26665

Doorlec Drive Shaft 1" x 19" Stress-Proof SGP

BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

  • Low profile trolley operator with brake and slow speed modification installed
  • Comes with #48 roller chain
MP00215

Micanan Limit Shaft Assembly N1 H/J

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

  • Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
  • They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.
MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

  • Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
Worksheet
PORT-ROYAL-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
GX-175-S-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
K44-1210-4XD

LiftMaster E-Box Enclosure N4

  • Plastic replacement box only
871-ZAP

Zap Interface Expansion Module

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

  • 12-ga angle
SP-24

EMX Surface Mounted Loop Pad e/Wire Guard

  • Designed to fit between the guide rails in automated carwash systems.
  • Made with durable polypropylene this sealed pad can stand up to carwash detergents.
  • Able to detect up to 30 inches high when coupled with EMX’s line of vehicle loop detectors.
  • Size: 23.75” x 23.75” x 1”
  • Material: black polypropylene
  • Lead-In: 50 feet shielded twisted pair
    • .......more details
31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

192417

Torque Force Pocket Guide 3.5" x 5" 195307

  • Imperial multiplier
  • Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts
N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

  • N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
  • Comes with CPS-UN4 photo eyes
CABLE-NR-14-GALV

Cable No Roll 1/4" 19x7 Galvanized 500ft

  • 19X7 rotation-resistant wire rope.
106141

Marantec Shaft Adapter

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
12-3000

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

  • Fits SW470 gate operator
M-0131

Autogate Proximity (Limit) Switch

15-41B10G1

Sprocket 41B10T 3/4" Bore

  • Also known as: 15-41B10GXX 15-41B10G1 155010
20650

Coax Cable Extension Adapter

  • Adapter with “F” socket
  • Connects two coax cables to extend length
HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

  • Replacement bolt only (1)
K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
21001

Limit Switch Micro

K77-19130

LiftMaster Hardware Kit LA400 LA412

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

K94-37871

LiftMaster Reset Switch and Harness SL595

  • For model SL595 slide gate operators
3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

  • Polyester strap 2" wide
  • Work load limit 3335 LBS
RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
K77-37853

LiftMaster Cover Assembly with Lock & Keys CSW24U

  • This is a made to order replacement part. Please allow extended lead time due to manufacturing and shipping for all made to order LiftMaster® parts
.234-3.5-11.25-RHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Right Hand

029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

  • Complete Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
  • Price varies according to size
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

  • 050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
  • Unit will feature a yellow learn button
2650-115-12

Linear HSLG #40 Chain 46 Feet

  • Purchased in conjunction with a gate opener
ME00008

Micanan Disconnect Shaft Gearhead 3/4" x 15.75"

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

  • For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.
7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
CP-ST3-WP

Lynx Button Station 3WP English

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2524 for #2376 balancer
GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

  • Heavy Duty 14 gauge offset hinge #1/2
  • Powdercoated Grey