Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MGH-6113-ECB-RH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation Manual Sell Sheet

RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

Pedestal post with hood
High quality aluminum
42" & 72"
Dual face-plate allows for easy wire connections

Shop drawing

DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

Pocket size key fob
Low cost entry level compatible with HID Prox Readers.

CP-PU-DRV-HDC

Lynx Drive Pulley 7/8" x 8" 5L HDC

7/8" shaft
8" diameter

1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

For door thickness of 1-5/8" to 1-3/4"

041000

Surge Protector1080 Joules UL Listed (041008)

Woods surge protector
Full 3 line protection
Electrical rating – 15 A 120 VAC 1800 W
Voltage protection – L-N: 400V L-G: 500V N-G: 400V
900-1500 Joules surge protection
Max Surge protection – 6000 V

.......more details

VBELT_4L400

Lynx VBelt 4L 40"

Fits Lynx MCJH operator

157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

Black Stamped Steel
Also known as Spade Style
Mounting hardware sold separately
Priced per each

26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

Decorative hinge strap only.
Black flexible magnetic material with deep embossed design

LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector (50-DSP7LP)

10-30 VAC/DC low power fail-safe loop detector
<2mA stand-by current draw
Compact design - ideal for linear actuator control boxes
Automatic sensitivity and frequency adjustments
Ideal for solar or battery powered gate applications

1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

Prevents the 1104 from buckling in the hot sun

K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

For models APT T SD 115V 1Ph L4

25-2015

LiftMaster 15 Amp Overload Fuse

For models: SL585-100-11 SL595-100-11 SL575-100-11

25-2010

LiftMaster 10 Amp Overload Fuse

For models: SL585-50-11 SL595-50-11 SL575-50-11

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

Co-extruded using rigid PVC backing with flexible PVC seal.
To be used with the offset U-channel retainer only (26-40037 or 26-40039)

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045

MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.

.......more details

Installation Manual

HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish
For Use on Clopay Brand Full Vision Products

BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

Rating: 2200 lbs max per door
Use with: 3" straight track
Aluminum bracket with zinc plated hardware
Sold as a pair (includes one left and one right).

50346

Doorlec Electric Switch and housing for Mechanical Edge

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.

10-1000-10FT

Strip Curtain 10' x 24" Angle Mount - 8" LT PVC - 4" O.L Clear

10 ft wide x 24" high
Mounting bar sold separately

2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

50800P

LiftMaster Treadle Protection Plate **discontinued

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

Five feet long.
OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
The weight of the vehicle compresses an electric switch which sends an open signal to the door.
Requires a 2-wire connection to the operator but does not require power to function

97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

For angle application - 90 degree
For use with Light Brush or Vinyl Insert.
For applications that require both brush and vinyl

MK-00004

Micanan Travel Limit Switch

GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

PIN016

Manaras Coupling Pin 3/8" for MJH

4 required for MJH manufactured prior to 1998
2 required for MJH manufactured after 1998

K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

Replacement arm only - no stripes old style

ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

With end-panel
Also known as 41A5507 41A5507B

27-48-130

Extension Spring 8' Door - 130 lbs Yellow

Single - Loop
27" long 48" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

K94-36411

LiftMaster Piezo Alarm

For LA400DC

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

For use with LiftMaster LA500 Series swing gate operators
Includes ID resistor kit
Includes LA500 product ID

ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

1-1/16" Wide 9/16" High

17S

Rolling Steel 2" Flat Stamped Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

For 1/3 HP and 1/2 HP operators only

MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

For 3/4 HP and 1 HP operators only

MP00020

Micanan Up-Charge Track and #41 chain for 20' h Door *Actual length 270"*

For 3/4 HP and 1 HP operators only

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

Allows for operation of a door by an auxiliary chain hoist.
Hoist mechanism is coupled to front end of drawbar
MUST specify door width and position of hoist (left or right)

MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

Chain modification when purchased with any of the following operators; PRO-T TB APT and GT

9003-15FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 15' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 9' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

USVD-4X

EMX Ultra Sonic Vehicle Detector

The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
Aux. relay settings for pulse on ENTRY EXIT or BOTH
Output delay option for 1 2 and 4 seconds
Operating range: 1ft. – 5ft.

.......more details

Installation Manual Sell Sheet

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

M005

Rolling Steel Groove Mouth GM6789 Fire Door

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

B014

Rolling Steel 2" Flat Bar 5/16" Sold per Foot

14-J

Rolling Steel 3" Flat Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer to specify exact length

342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer must specify exact length required

348-CUT

Whiting Tongue & Groove Bottom Panel Assembly with Lock 15-1/2" Cut to Custom Size **Quote Only

Cut to exact size required ** customer must specify
Primer only

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.306-5-1/4-RH-C

Torsion Spring .306 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 5-1/4" Length: 12 ft

.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 1-3/4" Length: 12 ft

.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 2" Length: 12 ft

.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 1-3/4" Length: 12 ft

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

70.32

Whiting Stainless Steel U-Bolt 1-1/4"

Sold per U-bolt

7515.1

Whiting Stainless Steel #77 Lock Handle Keeper

PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification
Brake not included
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

MW-00021

Micanan Splash Proof Cover Fully Assembled

Splash proof cover for models: PRO-H J HHD GH and GHC
Same as MP-00204

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

BK307

Jamb bracket J-07 #7 12 gauge

Sold by the piece
Height 3.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.