Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
JB-02

Miller Edge Junction Box Metal

  • For commercial overhead doors that use coil cords or retracting reels
  • Standard metal junction box with cover
  • Includes 1 x 90-degree connector 1 straight connector
  • Includes strain relief + 2 wire nuts + pop-out holes
  • For single-angle bottom bar of rolling steel door
  • Also compatible with sectional door
    • .......more details
2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
M-0319

Autogate Groschopp Inline Motor 24V

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 536
  • Reverse side is #431 Bright White
Colour chart
K76-36681

Liftmaster Replacement Antenna for STAR1000

  • This is an antenna replacement kit for the PPWR & STAR 1000
SHAFT120

Manaras Input Shaft for OSHW

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
H5NA12

Richards-Wilcox Hinge 5NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

  • Used on the BL229 gate op.
WLMODULE002

Manaras Univ. Aux Output Module BOARD070

AW-10

Miller Edge Air Wave Switch Only No Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instruction manualSell sheet
OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
XBA15

NICE Aluminum Bar with 3M White Paint 69mm x 92mm x 3150mm

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

37380

Doorlec Auxiliary Contacts BF9 Contactor

729014

FAAC Manual Release Dial

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

  • This is an option when ordering a panel
Q170

LiftMaster Control Box Cover HCT K75-50190

  • Replacement Control Box Cover Q170.
  • Compatible with LiftMaster® Model HCT Overhead Gate Operators
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

31105

Doorlec Sprocket 41B23 1" Bore

31104

Doorlec Sprocket 41B23-5/8"

Q237

LiftMaster Crank Input for SL3000 (K75-50242) ** Discontinued

39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

  • Compatible with many of the newer Genie chain and belt drive openers.
  • New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
  • Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.
PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
LIMIT017

Manaras Micro Limit Switch SPDT

  • CAP001 sold separately
SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
Wireless System Chart
1004-134-10'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 10 ft**Actual Length 10'2"***

  • For door thickness 1-3/4"
40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator

  • Charges the gate access system battery using solar power
  • Ideal for remote and sunny areas without access to an AC outlet
  • Replaces the need for gate access system transformer
  • Can be mounted to almost any fence gate or post
  • Mounting bracket and hardware included
  • Contains (2) SOLPNL20W12V solar panels
    • .......more details
.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-514-R-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound. Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.331-334-R-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.295-2-R-C

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
29135

Doorlec Transformer 550Vpr 28V sec. 50VA

PRO-HHD-10043U-L

Micanan 1 HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP 460 volt 3 phase Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual Specification Sheet
PRO-HHD-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Specification Sheet
PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
PRO-HB-5023U-RH

Micanan 1/2HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
BEA-10-INDBRKT

BEA Extension Bracket Heavy-Duty Powder Coated

  • Heavy Duty Powder Coated Steel
  • Adjustable from 20 to 36 inches
  • 12" x 2.5" Mounting Face
  • Fasteners NOT Included
Installation Guide
PRO-H-7583-U-LH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
PRO-J-10053-U-RH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
MK-00346

Micanan Relay 12 VAC 8-Pin Plug-In

MK-00223

Micanan Transformer 460V-110V-100VA

MK-00228

Micanan Transformer 230V-24V-50VA

MM-00295

Micanan Wall Mounting Plate (Reducer 120)

MV-00027

Micanan 110V Commercial Receiver CR32-110V

  • A transformer 110/24V (MK00030) is supplied separately for the 110V version
MV-00239

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

  • Surface mount
  • Killark
MV-00009

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Plastic Housing
MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

  • Surface mount
RA-HOIST

GDI RA Chain Hoist/Brake 'BCR' N4/Flr Levl Dscnct N4 Field Install

  • Can be added in the field
GDI-HB320

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft UL325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

  • Thru-Beam type
.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-514-R

Cut-to-Length Torsion Spring .283 x 5-1/4" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-TB-10023-U

Micanan 1 HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7525-U

Micanan 3/4HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-2

Standard Riser Bracket for 6" Above Dock or Less 2"

  • Standard 2" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

L

Molded Rubber Bumper Black 18" L x 8" W x 18" 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 18" L x 8" W x 18" 4" Projection
    • .......more details
M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-14

Laminated Bumper Standard Black 10" x 14" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
Drawing
LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 300 lb load
CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

  • This rope is most commonly used on small overhead cranes and pulley systems.
  • Provides strength and flexibility but not a lot of wear resistance.
  • Cable break strength: 13600 lbs
NUT015

Manaras Hex Nut 5/8-24 UNEF

Z9211-2

Stationary Cone Tool 2-5/8"

  • Easily dislodges the cone from the torsion spring
MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

  • Used on PRO-GHC
  • 10 required per operator
MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
MF00019

Micanan Hex Head Bolt 3/8"- 16 UNCx1 Full Thread

  • Used on PRO-GHC
  • 6 required per operator
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

VWS-34-BLACK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Black

  • Pan head
  • S point
PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
33223A

Genie Bushing

  • Drive shaft bushing on PMX500 Chain Glide
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs