Devanco Canada - Get The Right Garage Door Opener‎ and Parts

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions

109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.

15

Whiting Truck Door Center Hinge

2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

A Whiting original

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

41A6689

LiftMaster Trolley Threaded Shaft D-Shape

For use with various LiftMaster® Belt Drive Garage Door Openers that utilize a T-rail.

41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
Also known as: 41A5483-15 41A5635 01A5635A

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

E/BLOP/371

Automatic Systems Loop Detector for Logic Board with Drive

Feig Double Channel Loop Detector Option for AS1620 which is the new logic board with drive for the BL229

H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

60-2730

AB 42GRU-9002 Nema 4 Retro-Reflective Photocell Exterior *** Obsolete

Voltage: 110VAC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

950-193

Richards-Wilcox 3" Sgl Btm Roller Carrier with Roller Carrier Tube for short stem roller

Original RW part

A22KITSKB

Erone Web-Based IP 2-Door Controller SOLARKPB Kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 SOLAR Keypad/Reader 15 Credential Software
Pre-assembled universal plug-in power supply (120V/240V) included
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure

.......more details

Wireless System Chart

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

Powerful extra quiet and energy efficient 1/2 HP motor
115V / 1 Speed
Durable super lightweight and compact Polypropylene housing design
ETL/CETL Safety Certified

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

WD-309961

Wayne Dalton Wired Wall Station 372Mhz 3976

2 Buttons
Color: Cream
Dimensions: 2-1/4"" x 4""
Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3018DLX 3514 3522 3522DLX; Quantum: 3214 3314 3316 3414; Prodrive: 3220C 3221C 3222C 3224C 3320B 3322B 3324B

SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

BK149/PR

Residential Bottom Bracket RBB-75 sold as a pair

For use with 2" straight track

GBU412EF-1

Gate Roller 4-1/2" x 2-3/8" Galvanized Sold Individually

Galvanized gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

2510-273

Linear 230-Volt Heater for Gate Op

MD00077

Roller Chain #40 Sold by the Foot

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

Used on the BL229 gate op.

MOUNTSHAFT015

Manaras Hoist Shaft Kit for OGH

HAE00012

Linear Motor Cover LDO50

Replacement motor cover only

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

10-10191-GR

LiftMaster Brake Disc

For various Liftmaster commercial slide door operators
Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209

GAL.262-258-144R

delete

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

red replacement button for 8L5-OCS

120BH

12" Heavy Brush Insert 6ft Long

Polypropylene bristles

CAP475

Capacitor 125VAC 475MFD

Motor Start Capacitor 125V 475 MFD

OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

50442

Doorlec Mushroom Push-Button Red for 1-Door

Capable of opening one door
NEMA 4 Enclosure

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

FLO1R-SA

NICE 1-btn Keychain Remote 433.92 MHz

Rolling code No internal dip switches programming with the reciever
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

K32-11009

LiftMaster Gear Reducer 45:1 1/3-1 HP

Same as: 3211009 3290011 32-11009
For use on 3-horsepower 45:1 LiftMaster GH (gear head) commercial garage door operators

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

HW0429-RH

SteelCraft Commercial Bottom Bracket Right Hand Only

Right Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

ST101-BTM-WHITE

Lynx Bottom Panel White 10x24

Includes bottom PVC

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

CP-CLH-58

Lynx Clutch Hub 5/8"

DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

H-0168

Autogate VBelt Banded B-66

New Style Double Reduction

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

F520-3.15A

Fuse 5 x 20mm 3.15A 250V Fast Acting 5/Pkg

5 x 20mm miniature fast acting glass fuse
Rated voltage: 125V/250V
Rated current:3.15A
ROHS compliant
5 per package ( Clamshell)

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

MO00027

Micanan Clutch Spring 0.218 x 0.812 x 1" 4 Coil Zinc

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T

88573

Marantec Relay Power Board for M4500 Models

Same as # 83364

CM30E

Push-to-Exit Button Green

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

C-26-1/4X14-134-W

Thermal Window 26-1/4" x 14" for 1-3/4" Cedo Door White

For 1-3/4" thick door

MGH-6535-ECH-RH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

MP00128

Micanan Up-Charge Track and #41 Chain for 10' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

PL-A22-BOARD

Lynx RPM Reader Board Proline

210134

Skylink Pulley Assembly - Belt

Fits Skylink & Mastercraft 046-0266-0 belt model openers

2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep