Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

  • Used on BG770
  • Arm adaptor included
  • 15' x 2.5" square arm
  • Replaces 50ALUMARM
VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

  • 5L370
SPR50B12X1

Sprocket 50B12 for a 1" Shaft 1/4" keyway

  • ame as MD-00012
K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

  • For commercial operator model T
  • Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)
60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

  • Use 80% less energy than incandescent or halogen bulbs
  • LED bulb included
TRACK-3"-RAW-12

Raw Vertical Track 3" 12'-0" Sold per Piece

30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

  • Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011
MOD008

Manaras Double Limit Switches Mod. (Per Side)

  • An extra SPDT pole is available to control auxiliary features such as lights fans etc..
  • The additional pole must be specified on either the normally open and/or normally close contact as well as on the opening and/or closing sides
  • Modification upcharge is charged per side
TRACK-GUARD-24

Track Guard 24" Tall Safety Yellow With Base Sold as a Pair *** NLA

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5090 (right) and 60-5091 (left) sides
    • .......more details
5001-10-DK-BROWN

Residential Side & Top Weather-Strip 10' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
PRO-GH-5011U-L

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
OES-5104

LiftMaster 2" x 2" PVC Channel 16ft

  • Connects the door to the edge kit. 16' total (sectional doors only).
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
RW-TS-OPTION

Richards Wilcox Top Seal & Retainer Option Sold per Foot

  • Available option when purchasing doors
MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

RW-DOOR

Richards Wilcox Door Special Order

  • Special order as per customer's requirements
RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

  • As per customer's requirements
PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

MGJ-5011U-RH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Right Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
020C98290

W-Style PolyTrak Complete Replacement Door White Stainless Steel Pkg 020C98290

  • Complete replacement door is fully assembled maunfactured to exact size includes tracks operator assembly and side seals
  • Engineered polymer roll-up door
  • Galvanized steel reinforcement channels
  • Unaffected by heat and cold: -92F and +158F (-69C to 70C)
  • Panels never need painting color is molded in
  • White is standard but available in grey yellow or red.
    • .......more details
.283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

  • This unit will work on any model Marantec garage door opener
  • Replaces part # 47307 65456 M3-543
  • Made in Germany
029-98100

T-Style Replacement Door White Stainless Steel Package 029-98100

  • Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
28301

Insert Bearing Pillow Block Hy-Speed 1"

  • ASPP-205
MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

  • Track only- no chain or hardware
CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

MU22-4WIRE-E-Y

Miller Edge MU22 4-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
SD755L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
MK00709

Micanan Varistor Harness 460V with Red Wires

SD755L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

  • 1-channel mid-range receiver
  • Up to 10 miles line-of-sight range (with XT-1 & XT-4)
  • Up to 2 miles of line-of-sight with handheld devices
  • Over 64 000 codes
  • Weather-resistant case
  • RF frequency; 27.255 MHz
    • .......more details
Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

  • 3" Straight Key
  • Stainless Steel
50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

  • Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
  • Bidirectional
  • Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor
070032-0000

Overhead Double Drive Pulley

MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

  • PRO-H/HB operator parts
  • 2 required per operator
7232

Whiting Spring Spacer 38-1/4" Long for 2-5/8" ID Spring Wire

  • For use with #7176 balancer
MK-00063

Micanan Honeywell Limit Switch

.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MOD003

Manaras Time Delay Mod. 1.5 Sec 24V for Contactor Models

  • To be ordered in conjunction with a commercial operator
  • Order MODKIT003 for field upgrades
26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
PRO-HB-5011U-RH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MOUNTSHAFT012

Manaras Clutch Shaft Kit for MSJ

27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MP00053

Micanan Track and #410 (#48) Chain for 7' h Door *Actual length 114"*

  • For 1/3 & 1/2 HP Micanan trolley operators
PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MP00088

Micanan Track and #41 Chain for 8' h Door *Actual length 126"*

  • For 3/4 & 1 HP Micanan trolley operators
PRO-TB-10083-U

Micanan 1 HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
MU-00005

Micanan Hand Crank Handle 6' Long

  • For hand crank operation in lieu of hand chain and pocket wheel
PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
TXMQ-2:1

Grove Gear Gearbox 2:1 Ratio 56C

  • To replace serial # 70518900
MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
Additional arm accessories
.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

  • A one piece travel module replacement kit.
  • Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
  • Same as 041D7742-5
K76-38732

LiftMaster Electric Motor 24VDC for HCT UL325

K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
PRO-TB-7511-E

Micanan 3/4HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Non-Monitored board NO photoeyes
PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
Installation manualSpecification sheet
MM00013

Micanan Chain Guard (MM00431)

  • Fits PRO-H/HB
  • New part number # MM00431
MM00155

Micanan Disconnect Arm PRO-HR

18002

Doorlec Reducer #80

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

  • Normally Closed
  • SGR13-193-028-D1-E-HS9-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NC relay output 15m cable
Specification sheetWiring diagram
43402

Carriage for R-99 Trolley

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

34101

Doorlec V-belt Pulley 9" x 5/8" bore

  • Fits model ETB-3
28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

  • For door thickness 2"
Q089

LiftMaster Trolley Body Assembly Kit K75-50147

  • For Liftmaster trolley operator HCT
  • Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set
E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

  • Easy-to-wire terminal block
  • Built-in timer offers selectable ON-delay OFF-delay and one-shot
  • Relay or transistor output models
  • Light-ON/Dark-ON operation switch selectable
  • Model: E3JM-10M4-US
98EO626

Panic Bar for Pedestrian Door- Exit Only

  • Panic Bar for exit only
ME00001

Micanan Limit Shaft 3/8-1/2 x 9.75"

G108019

LiftMaster Arm Clamp PVC

  • Used in connection with arm # G651209P
Q013

LiftMaster Idler Pulley K75-50090

  • Toothless idler gear for use on SL 3000 operators
  • Includes bolt and sleeve.
  • Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

  • Upgrades added when purchasing a commercial operator
FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

60-7241

Standard Caution Sign French 12" x 24"

108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
4007-14FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

  • Fits GT GH GHC & GSD
SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"