Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

  • Replacement screen only
111421.0003

Overhead Limit Module RSX

3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys keyed alike
  • H=7" W=2-3/4" D=2-3/4"
EHJ-353-3/4

Doorlec Industrial Jackshaft Op. ECB 3/4 HP 575V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

  • Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
  • Operation mode and max sensing range: Diffuse proximity: 0-5 m
  • Compact rectangular housing (50 x 50 mm x 17mm)
  • Power output and signal level indicators
User manualManuel d'utilisateurSpec sheet
106-0005

Rodent Block Pull Chain Seal 2"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
OSH-6812-ECB

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
CP-SH-58-1038-LS

Lynx Limit Shaft Only

  • 5/8" x 10-3/8"
  • Used on most of Lynx operators
K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

  • This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
  • Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators
14211

Doorlec Solenoid-Brake Lever Upper

  • Fits model LJH
G220-1

Heddolf 1-btn Genie Compatible Remote 9 or 12-Dip Switch 390 MHz

  • Genie compatible transmitter
MK-00806

Micanan Heater Probe in Control / Limit Box 24V 20W 2" long Field Install

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

  • Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Grey powder-coated finish
  • 9" x 3"
XBA8

NICE Apollo Red/Green Internal Traffic Light Module

  • This module makes your barrier shine red and green signaling oncoming traffic when it is safe to pass through the barrier. Designed for M-Bar and L-Bar barrier gate operators.
41D9204

LiftMaster Wire Harness LED

  • Same as 041D9204
510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

  • This is an upcharge when ordering certain doors
BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

GIDFX3.S

Genie 3-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX3.S GIDFX3.S
MP00215

Micanan Limit Shaft Assembly N1 H/J

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

IBT4

NICE Interface Module

  • Required for use of Oview on the new Gen 2 MBAR models
  • Same as IBT-4N
MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

  • Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
  • They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.
GODEFROY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Godefroy design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
EXT-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Extended Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MONTARVILLE-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
PORT-ROYAL-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
VERMONT-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Short Panel with vertical lines carriage style - Panels are spaced to not allow for decorative handles - Decorative hinges can be used - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
GX-175-A-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
GX-175-S-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
WOODGRAIN-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Woodgrain Only - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
PREMIUM-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Short Panel - Available in white or black steel - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
871-ZAP

Zap Interface Expansion Module

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

  • 12-ga angle
ME00006

Micanan Intermediary Shaft 1" x 10-7/16" c/w KW

192417

Torque Force Pocket Guide 3.5" x 5" 195307

  • Imperial multiplier
  • Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts
CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

  • For trolley operator
106141

Marantec Shaft Adapter

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .135 wire size
10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • IP65
  • Operating temperature: -10 to 55C
  • Controls one 10RD900 receiver
Product guide
541.3224.00

Whiting Outside Cam Lock w/Inside Release

  • An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG
STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
M-0131

Autogate Proximity (Limit) Switch

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

  • .192 x 2-3/16 x 12'
HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

  • Replacement bolt only (1)
02-406-2

LiftMaster Key Set Qty 2

  • Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
41D0216-2

LiftMaster End Panel with Light Socket

  • Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
  • Circuit board not included
CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

  • 12-ga angle
P-0128/LH

Autogate Retro Bracket Left Handed System

  • This is needed to change over to their current motor
21001

Limit Switch Micro

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized Cable 1/8" 7x19 5000ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Stainless Steel Cable Specifications
JB-02

Miller Edge Junction Box Metal

  • For commercial overhead doors that use coil cords or retracting reels
  • Standard metal junction box with cover
  • Includes 1 x 90-degree connector 1 straight connector
  • Includes strain relief + 2 wire nuts + pop-out holes
  • For single-angle bottom bar of rolling steel door
  • Also compatible with sectional door
    • .......more details
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

M-0319

Autogate Groschopp Inline Motor 24V

CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

MV00210

Micanan Banner Reflector 3"

  • Compatible with Banner #MV-00300 reflective photocell
2650-115-12

Linear HSLG #40 Chain 46 Feet

  • Purchased in conjunction with a gate opener
MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-D/TAN

Commercial Side & Top Weather-Strip 7' Long - Desert Tan 7001-DT

  • Desert tan galvanized steel with desert tan dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CP100C

Coupler Specialty Coated 1" Bore

  • Coated with 1000 plus hr salt spray rated finish
  • 1" Bore with 1/4" keyway
  • Malleable iron for high strength and resistance to shock loading
  • Coupler halves separates and is adjustable
  • 4-(3/8"-16 x 1" square head set screws installed
  • Rust inhibitor coating
    • .......more details
7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
K30-205-E

LiftMaster Boot Red

  • Also known as: 30-205-E 30205E
  • Replacement button cover for 02-406 station
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
  • Also known as: 20-1100-1T 2011001T G2011001T
GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

  • Heavy Duty 14 gauge offset hinge #1/2
  • Powdercoated Grey
AM-DPR

Linear Dual Proximity Reader

  • Compatible with most Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
    • .......more details
CPT-223-50

Miller Edge Bulk Extrusion 50' roll

  • For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
  • Sensivity: 15lbs max activation
  • Lead wire 18"-22 gauge unversal
  • Wire configuration: N.O.
  • Electrical interface: sealed module- provides seamless connection to logic or relay type operators
  • ANSI/UL325 recognized component
    • .......more details
A22KITSKB

Erone Web-Based IP 2-Door Controller SOLARKPB Kit

  • Atrium 2-Door Controller Kit Web Based IP Hybrid
  • Module Embedded Web Server Includes 2 SOLAR Keypad/Reader 15 Credential Software
  • Pre-assembled universal plug-in power supply (120V/240V) included
  • Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
  • On-board Ethernet Port with AES 256-bit encryption
  • Auto-detect hardware modules Quick and easy card enrollment procedure
    • .......more details
Wireless System Chart
K20-1150C-2P

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph TEFC

  • Replacement electric motor for SL595-15021 and SL595-15011 models
SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
K75-37549

LiftMaster Disconnect Kit for SL595U

  • Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
  • Allows manual operation of your gate operator
2500-2347

Linear Limit Switch SPDT Omron D2VW

STATION082

Manaras Push Button Control Station 2-Button Nema 4/12

  • 2-button 2 N/O contact
  • Plastic
G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

2100-564

Linear Clutch Disk Facing HSL HSLG