Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K001C3196-3

LiftMaster Antenna 315MHz

Fits SL595

.250-1-3/4-LH-C

Torsion Spring .250 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 1-3/4" Length: 12 ft

P-0129/RH

Autogate Retro Bracket Right Handed System

This is needed to change over to their current motor

OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

.306-6-R-C

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

OPJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

When ordering order one foot longer than actual door width.

.295-2-5/8-RH-C

Torsion Spring .295 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 2-5/8" Length: 12 ft

PRO-H-7521-U-RH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

LEVER056

Manaras Disconnect Lever

Works on newer model MJH

15480

Doorlec Heater Strip 175 W 575 V

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

T118

Manaras Trolley Track 18ft for 3/4HP & ALL APT models up-charge *Actual length 246"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

18002

Doorlec Reducer #80

109435.0001

Overhead Limit Switch

.437-514-R-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

ME120-BLK-2WIRE-R

Miller Edge Black 2-Wire NM Right Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

1102-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

SPAMG095A000

NICE Upper Cover Kit MBAR5

MM00020

Micanan Disconnect Arm

28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

1104-18FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 18' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays

Instructions Manual

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

75LMC

LiftMaster Illumintaed Wall Button 2 wire Universal ** To Extent of Inventory

2 wire wall button for all openers that will activate by connecting the two wires together.

50615

Splash Proof Cover EHJ / HDC

Drawing

C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF514U

.406-6-R-C

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

Powdercoated Grey
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

.225-134-R-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K32-8002

LiftMaster Gear Reducer

Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002

MGH-6214-ECB-LH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

9-24-1

Lynx BarLock Mounting Plate

Assembly Manual

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

5001-16-CREAM

Residential Side & Top Weather-Strip 16' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

GALV-306-6-144-L

Torsion Spring .306 x 6" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

BCSI-PM19

Pivin Drapeau Keyway 1/4 x 1" *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

TDC7-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #48 chain pack (TDC48-10) ***Actual length 155"***

Double Angle Rails for doors up to 10'6" high
Includes #48 chain pack

041D0190

LiftMaster Power Cord RJO

Replacement 6' AC Power Cord
For use with various LiftMaster® and Chamberlain® RJO Series Wall Mounted Garage Door Openers and Light Duty Commercial Door Operators

GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

2400-501

Linear Retaining Ring

768-500

Fasteners Lag Screw Full Thread Hex Regular Profile 5/16" x 3" 500/Pail

7/16" head
Hex Washer Regular Profile Head

GALV-262-258-144-L

Torsion Spring .262 x 2-5/8" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

620-100989

Linear Heater Kit Assembly 115V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

100 key pack numbered 00 thru 99

BCSI-PM204

Pivin Drapeau Threaded Chain Tensioner BCSI Gate Operator ** Price by Quote Only

GAREX-PAINT-BLK

Garex Touch-Up Paint Black

0.5 OZ

K76-37077

LiftMaster Brake Kit APT

Kit comes made to order
Compatible with LiftMaster® Model APT Commercial Door Operators; equipped with Logic 5.0.
Includes: solenoid cover pressure plate lever pulley and 4 #10-32 nuts

LRS-FP-50

EMX Sensor Flat Pack 50ft Wire

Lead probe ONLY. Requires the LRS-C1 detector
Three-dimensional presence detection of vehicles
Select X Y Z axis independently
Stand-alone sensor
Sensor stores ambient background and settings in non-volatile memory
Includes sensor and 50 ft of lead wire

.......more details

510.2996.05

Whiting Steel Roller Upgrade Option for 5 Panel DF Door

Upgrade option only - must accompany a door order

45DCT125

LiftMaster Circuit Board for various 1.25 HP retail openers

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Works with 1.25HP retail openers
Also known as: 041D7356‑5 41D7356‑5 45DCT125 1D7356‑5 001D7656‑5

OTBH-6112-AM-ECB

Manaras Trolley Operator 1/2 HP 120V 1Ph Monitored w/Eyes ECB Apt. Model

A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
30 cycles per hour 100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 chain on all APT models
TTC standard on all models with BOARD070

.......more details

TCBOS-311

Doorlec Single Arm Barrier Gate Op 1/3HP 120volts w/ heater and DC2000 board

Includes 500W heater

5009-559-PAINT

Aluminum Touch Up Paint Nail Polish Style Pebble / Kaki # 559

Glass bottle and brush applicator

5009-429-PAINT

Aluminum Touch Up Paint Nail Polish Style Ice White / Blanc Glacier #429

Glass bottle and brush applicator

WHITING-RV-INS

Whiting Stainless Steel Rivet/Mono Bolt Option for ColdSaver Door

Upgrade option

540.1000.00

Whiting Cold Saver Premium Topcoat Paint Option White

Option for Cold Saver Doors

K20-1050C-2PSF

LiftMaster Electric Motor 1/2 HP 115/30V 1PH CF

Replacement electric motor for fire door op

MG00012

Micanan Ribbed Hex Nut 5/16-18UNC

0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

Overhead compatible full-size transmitter

510.4228.07

Whiting Double End Hinges DF SS/Nylon - 7 Panel Door Add-On Option

Add-on option when ordering door.

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

CHW401-114-TFRCE

Chain Hoist Wall Mount 4:1 1-1/4" 2000R Torque Force (126658)

4:1 Reduced drive
Sprocket: 41B36x114 Bore: 1-1/4"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Cross Reference: 2000R OMI 4006

Drawing Sell sheet

MG00007

Micanan Hex Nylon Lock Nut 6-32UNC

112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

Fits OPRSXH75015BR GCL-H

050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional

050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
The unit will feature a yellow learn button.

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.