Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

  • replacement rotating encoded 8 position selector for 8L5-OCS
WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
RELAY026

Manaras Relay DPDT 120VAC

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
41AB150-2

LiftMaster Receiver Logic Board ** NLA

  • Also known as: 41AB150-2 41AB150
  • Receiver Logic Board 315MHz
Q170

LiftMaster Control Box Cover HCT K75-50190

  • Replacement Control Box Cover Q170.
  • Compatible with LiftMaster® Model HCT Overhead Gate Operators
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
41D9202

LiftMaster End Panel Driver Board ** Discontinued

  • 041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with the WLED model
31104

Doorlec Sprocket 41B23-5/8"

F520-3.15-SB

Fuse 5 x 20mm 3.15A 250V Slow Blow 5/Pkg

MD-00252

Micanan Connecting Link #50

Q237

LiftMaster Crank Input for SL3000 (K75-50242) ** Discontinued

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
2500-2393

Linear Apex I Module

  • Older model prior to Jan 2016
PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
MK-00034

Micanan Overload Reset 1-Phase 5 Amps

MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

  • Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011
.421-6-R-C

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.406-6-R-C

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.295-6-L-C

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.295-2-R-C

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-334-R-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.243-258-R-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
218756

Torque Force Spring Failure Device 1" Shaft Right Hand Side DT0054

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
ME116-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide-in edge for sectional doors.
  • With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
  • ME116 is resistant to flame water and most common greases and oils
  • Soft ends
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
    • .......more details
PRO-H-7583-U-LH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
PRO-H-7521-U-RH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
MK-00696

Micanan 4-Pole Terminal Strip

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

MV-00027

Micanan 110V Commercial Receiver CR32-110V

  • A transformer 110/24V (MK00030) is supplied separately for the 110V version
MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

  • Surface mount
  • Killark
MV-00006

Micanan 3-btn O/C/S w/Key Lock-Out Nema-1 Pushbutton Control Station

  • Flush mount
SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7553-U

Micanan 3/4HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Excellent Surface Grip on Tire and Ground
  • Lightweight Aluminum
  • Size: 6" wide x 6-1/2" long x 6" high
88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

  • Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
  • Galvanized Steel Sides
  • Size: 11-1/4" wide x 14" long x 14" high
PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

  • Single gang box
  • Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W
31337

Doorlec Idler Sprocket with Oilite bushing 50B12 for a 1" Shaft

BPPB1759

Garex Bottom PVC Moulding for 1 3/4" Door White U shaped 108"(9')

MX00164

Micanan VFD Transformer Panel Mod. 575V pri / 230V sec (MX00216)

  • The primary power is connected to the transformer panel and 230V from the transformer panel gets connected to OMC VFD operator
HRB-11

High Riser Bracket for 7" Above Dock or Higher 11"

  • High Riser 11" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-3

Standard Riser Bracket for 6" Above Dock or Less 3"

  • Standard 3" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

  • Reinforcement bar 2-1/4"
  • 20G
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-14

Laminated Bumper Standard Black 10" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
AIRSWITCH016

Fraba Air Wave Switch Only

  • Fraba air switch only
K79-32927

LiftMaster Control Board Autogate *** Not Available

  • Replacement control board used in various Autogate Operators.
  • Autogate is a gate operator manufacturer that utilizes LiftMaster control boards in their operators
  • Formally AG001
MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

  • Used on PRO-GHC
  • 10 required per operator
K74-18346

LiftMaster Limit Shaft Kit

  • Compatible with LiftMaster® Model GH 5HP Commercial Door Operators
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

BINS-SANDSTONE

Utility Bin Heavy-Duty Stackable Sandstone *** No Longer Available

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

  • Pan head
VWS-34-BLACK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Black

  • Pan head
  • S point
PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
40-3505-FR

LiftMaster Warning Sign Aluminum French

PRO-GHB50053-PNL

Micanan 5 HP 575V 3 Ph Gearhead with Brake No Controls

  • Special Order only
  • No controls in operator- separate panel is required
MGH-6214-ECB-RH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
T118

Manaras Trolley Track 18ft for 3/4HP & ALL APT models up-charge *Actual length 246"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
14-1054

PVC Roll 8" x .080" Low Temp Clear Reinforced Smooth 300' for Replacement Strip Curtain

  • Clear and smooth. Suitable for most average applications.
  • Temperature Range: -34° C to 65° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
  • Ribbed grade – for greater abrasion resistance and longer lasting clarity
50420

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 1

  • Surface Mount
  • General purpose EEMAC 1
MM00020

Micanan Disconnect Arm

PRO-T-5021-U

Micanan 1/2HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
BOLT016

Manaras Hex Bolt 1/4-20 x 4

MD-00563

Micanan Roller Chain #40 Stainless Steel 10' Pack

7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

  • Zinc plated finish
CP-BRAKE-DRUM

Lynx Brake drum

IRB-BX

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

  • Includes housing and clear plastic front
ME120-BLK-2WIRE-R

Miller Edge Black 2-Wire NM Right Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
SPR50B12X1

Sprocket 50B12 for a 1" Shaft 1/4" keyway

  • ame as MD-00012
BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

  • Does not include the solenoid
  • Replaces BRAKEPART012
GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
BG770-50-53

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 575V 3 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
OES-5104

LiftMaster 2" x 2" PVC Channel 16ft

  • Connects the door to the edge kit. 16' total (sectional doors only).