Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

2376.162_18.780

Whiting Torsion assembly .162 wire size 18" spring length 78" shaft

.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

MK-00430

Micanan Capacitor 240V/250V 70 Mf

For limited duty 110V operators

.243-2-5/8-LH-C

Torsion Spring .243 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .243 ID: 2-5/8" Length: 12 ft

LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

2806.148.180

Whiting .148 x 2-3/16 x 18" Roadside with Cones

LB1212-24

Laminated Bumper Standard Black 12" L x 24" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2" Length: 12 ft

18002

Doorlec Reducer #80

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

8" coaxial antenna included
Used for open/stop/close on commercial motors
N/O and N/C selectable
Compatible remote: 33LM

Installation Manual Manuel d'Installation

.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.421-514-R

Cut-to-Length Torsion Spring .421 x 5-1/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

CF-101-24

Commercial Side & Top Weather-Strip 24' Long Aluminum / Vinyl

Same as Garaga CF101

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

10-8026

LiftMaster Replacement Plate for Control Panel BG790

Also known as: K10-8026 G108026 108026

EL25S

LiftMaster Telephone Entry System Silver

Capable of accepting up to 2000 codes
4 assignable and programmable built-in relays
Mounting versatility and available in 3 colors: Gray Nickel or Silver

Installation Manual Sell Sheet

1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

Prevents the 1104 from buckling in the hot sun

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410

LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

Sensor Light Transmitter with LED
M12 High Power 15M Cable

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

Made from commercial grey vulcanized fiber

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

For trolley operator

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

37558R

Genie Belt Drive Sprocket Assembly

Complete assembly for the belt sprocket on top of the machine.
Works with the following models: IntelliG 1200 and IntelliG 1000

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

OWL

EMX Microwave Motion & Infrared Presence Sensor

The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor

.......more details

Manual Sell Sheet Quickstart Guide

990LM

LiftMaster Surge Protector ** NLA

Installation Manual Manuel d'Installation

MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MB-03104

Micanan Electric Motor Only 1 HP 230/460V 3PH C-Flange TEFC 56C

For models GT GH GHC GSD

MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

CAP475

Capacitor 125VAC 475MFD

Motor Start Capacitor 125V 475 MFD

LVB624-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

41D96-1

LiftMaster Light Lens for 8500

Also known as: 108D96-1 41D96-1 108D0096-1

OSH-6113-CONT

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

-Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.

2806.192.290

Whiting .192 x 2-3/16 x 29" Roadside with Cones

2807.192.290

Whiting .192 x 2-3/16 x 29" Curbside with Cones

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

Padded arm for MASDCBB3

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

19045

Doorlec VBelt 4L360

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

510.3920.07

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 7 Panels

Upgrade option

2200-215

Linear Precision Bearing 5/8"

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

Monitored version with Nema 1 photoeyes

2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

CP-LEV-BRAKE

Lynx Brake Lever

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H

017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

Price by Quote Only

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

Add-on to a OGH operator

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

Frame size is 56C

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

CP-SP-ARM-REL

Lynx Barlock Spring

MC271-2W-RH-BLK

Miller Edge MC271 2-Wire Non-Monitored Right Hand Black Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

7176.218*325.910

Whiting Heavy Duty Torsion Assembly .218 x 32.5" shaft 91"

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

MQ00009

Micanan Set Screw 1/4"-20

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)