Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
OMJ-6112-M-N1-RH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Right Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

  • Also known as: G233001 233001 23-3001
  • For use with various LiftMaster® Commercial Gate Operators
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

  • Magnetic striped cards
  • Track II encoded
  • Low-CO magnetic stripe
  • Sold in lots of 25
  • Same as: 0-200025
2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

  • Bead diameter 3/16" - 7/32" +/- tolerance
K72-12510

LiftMaster Limit Shaft Kit T commercial operators

  • Service kit for standard T commercial operators
2100-529

Linear Woodruff Key #15 1/4 x 1"

2200-555

Linear Sprocket 40A48 Machined

2200-042

Linear Sprocket 48B15 1" Bore

MB-02104

Micanan Electric Motor Only 3/4HP 230/460V 3PH TEFC

  • C-Flange motor fits: GT GH GHC GSD
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

XBA3HF

NICE L/MBAR Control Logic Board Hi Frequency (SPXA3HF)

  • Exactly the same board as XBA3/U just rated for higher cycle per hour because it has a built in fan on it.
9003-200-15-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 15' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-200-11-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 11' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

  • Also known as: K19-50106MN 199023NP
  • Complete kit includes: #50x106 Chain master link and clip.
5001-10-WHITE/BLK

Residential Side & Top Weather-Strip 10' Long - White Aluminum/Black Vinyl

  • Painted aluminum retainer with flexible dual fin black vinyl.
  • Residential use.
GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

GHX-6114-M-RH

Manaras Explosion Proof Gear Head 1 HP 120V Monitored Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
SRDRKP

LiftMaster Keypad Smart Reader

  • LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
  • Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
  • BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
  • OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
  • Accelerometer - based tamper detection
  • Tri-State LED light bar for user feedback
    • .......more details
SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
31369

Doorlec Sprocket 60B12 1" Bore

2200-309

Linear Double Pulley 7" 5/8" Bore

GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
SHAFT117

Manaras Output Shaft for OSH

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-GH-20053U-R

Micanan 2 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
TRACK003

Manaras 1 Piece Galv Track 2x2x12'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
31107

Doorlec Sprocket 41B29 5/8" Bore

O02R2401

AirLift Op. Retaining Rod Complete 8ft Std Op. ** Price by Quote Only

GAREX-PAINT-SBL

Garex Touch-Up Paint Sable

OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
7-6111

RW Hanger 323S Truck & Pendant Sold Individually

  • Size: 323S
  • Truck: Same as 323 Hamger
  • Pendant: 1/2" diameter Steel Zinc Plated
  • Fasteners: (1) 5/8" washer (1) 1/2" hex nut (1) 1/2" locking nut
  • Capacity: 1 pair for maximum door weight of 400 lbs
  • Shipping weight: 1-1/2" lbs
    • .......more details
301012

Whiting C-4 Anti Lozenge Bracket Road Side ** Price by Quote Only

Q079

LiftMaster Trolley Body Kit K75-50137

  • For Liftmaster trolley operator HCT
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
DHJ751L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
CG-HOIST-DOUBLE-1

ControlGard Chain Hoist Double Compound 1" Bore

  • Cornell Double Compound hoists are designed for larger doors
  • Features an integral braking system that only moves when the user is actively pulling the chain
2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
VBELT_4L390

VBelt 4L 1/2" x 39" A37

ETH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
CB14-KOR-PER-FT

Cable 1/4" 7x19 Galvanized Supreme Sold per Foot

  • Galvanized Cable 1/4" 7x19.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
  • Sold per foot anything over 2" is rounded up to the next foot.
    • .......more details
CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
DAK-2ULT-MVP

EMX Drive Thru Alert Kit Chime/Strobe Pre-Wired Enclosure *** Price by Quote Only

  • Kit includes: 2x EMX ULT-MVP Vehicle Detectors with LD-11 Connectors
  • 2x EMX PR-46-100 Induction Loops
  • 1x SLM500B LED Beacon and Sounder with SLMBW-012-024GY Wall Mount Bracke
  • 1x 120VAC to 24 VDC Power Supply
  • 1x NEMA 1 Junction Box (wall mounting hardware not provided)
Spec Sheet - DAK-2ULT-MVPQuick Start Guide -DAK-2ULT-MVPULT-MVP ManualDetect On Stop
PHOTO-076

Manaras Reflector 2" x 2" For Use w/ PHOTO-075

C12/5-BLADE

Felco Replacement Blade FC12/5 Single Blade

  • Single balde only for FC12 cutter
C12B

Felco C12B Cable Cutter Bench Mounted 3/8" Capacity* Special-Order Item Sold by Quote Only

  • ** Capacity of 3/8 inch diameter or smaller on stainless steel cable.
  • The unique triangular jaws never leave a frayed end.
  • The C12B bench-mounted wire rope cutter mounts easily to your workbench and can be single hand-operated
  • Length: 19 inches
  • Weight: 3 lbs.
2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 25" Long
  • For Roadside order part # 2806.171.250
1104-18-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
2806.162.220

Whiting .162 x 2-3/16 x 22" Roadside with Cones

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
DISCONNECT008

Manaras HDW Brake Release MTBH

OSH-6233-M-N1-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6113-M-N1-LH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6532-M-N1-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

RECTIFIER008

Manaras Eurodrive Blue Rectifier BGE3 3AMP

SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
BCSI-PM14

Pivin Drapeau Belleville Washer ** Price by Quote Only

  • Belleville Washer acts as a spring to keep pressure on the Clutch disk
SMF5034

Serco Spring and 6' Snubber Assy Kit *** Price by Quote Only

  • Dock Leveler 6' Snubber assy. kit chain chain stop shackles & extension spring.
  • For use with Serco brand dock levelers.
50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

  • For models LJH LJHW
K77-10473

LiftMaster Hardware Kit SD GSD

  • Also known as: 305PBSDGSD
  • Replacement Single Slide Door Hardware Kit.
  • Compatible with LiftMaster® Models SD and GSD Commercial Door Operators
745317

Strobe Low Profile Amber Lens Industrial Strobe

  • Polycarbonate lens
  • Single flash
  • Dimensions: 4" H x 5" diameter base
  • Available in surface mount or magnetic mount
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
4580-304-CONT/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Contemporary Brown 458-70 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
MP00228

Micanan Track and #41 Waterproof Chain for 14' h Door

1440-1-3/8"-WHT

Elton Residential Window for Flush Doors 1-3/8" thick 1440 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 42 5/16” x 14 1/4"
  • Cut-out size: 41 11/16” x 13 11/16”
  • Vision area: 39 11/16” x 11 5/8”
  • Different glass options and frame colours are available upon request
    • .......more details
ZAP-800-3-PB

Zap Control Box Assembly for ZAP800

C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

  • For 1-3/4" thick door
  • Old style with round screw heads
  • Glass Dimensions: 17-3/4" x 12-11/32"
  • Hole Size: 18-3/4" x 13-3/8"
  • Exterior Frame: 19-3/4" x 14-3/8"
K41-0073-000

LiftMaster HD Main Control Board

  • Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC
2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
HCT16

LiftMaster HCT Rail Only 16'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 15'6" high
LVB820-11/P1

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
GHX-353-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 575V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
BCH105L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1 HP 575 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Comes with CPS-UN4 photoeyes
  • External brake included
K41-0346-000

LiftMaster Transformer for INSL24UL

  • Transformer Replacement Kit. Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators
1-0241

RW Stay Roller 66 Black/Grey 2" Dia

  • Special order item
  • For use inside doors and can be fastened to concrete with expansion bolts.
  • Steel frame with a black enamel finish and a grey iron wheel.
  • 2-inch diameter roller
7-37-11

Barlock Bars and Center Only for 10ft Wide Door No Hardware Bag

  • Includes center and bars (61-1/2") only
  • DOES NOT include the hardware bag
K20-1100B-2LP-H24

LiftMaster Electric Motor 1 HP 115/208-230V 1Ph Logic 5

  • For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
  • Includes wiring harness
59174.0265X91-1/4

Todco Original Counterbalance Assembly Special Order Price by Quote Only

  • Made to Order for Serial #30662431-1
69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
K20-1100C-2LP-H28

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic 5

  • Also known as: K20-1100C-2LP 20-1100C-2LP
  • For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
  • Includes wiring harness