Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
70.32

Whiting Stainless Steel U-Bolt 1-1/4"

  • Sold per U-bolt
1715.20

Whiting Stainless Steel 2-Hole Grab Handle

PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
BK308

Jamb bracket J-08 #8 12 gauge

  • Sold by the piece
  • Height 4.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK307

Jamb bracket J-07 #7 12 gauge

  • Sold by the piece
  • Height 3.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
C-334-INSTALLED

Cones 3-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF375
86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

  • Same as K-SPLONG
CHAIN058

Manaras #410 chain 48 Pitch (24" long)

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
OGH-6436-ECB

Manaras 2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6535-ECB

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6435-ECB

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6115-ECB

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6213-ECB

Manaras 3/4 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

  • 1000 ft range
  • 2016+
  • This receiver will accept 8 Equinoxe O/C/S remotes
  • Nema 4
Programming InstructionsInstructions de programmation
OTBH-6534-1-ECB

Manaras Trolley Operator 1 HP 600V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6434-1-ECB

Manaras Trolley Operator 1 HP 480V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6234-1-ECB

Manaras Trolley Operator 1 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6214-1-ECB

Manaras Trolley Operator 1 HP 240V 1 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6114-1-ECB

Manaras Trolley Operator 1 HP 120V 1 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6533-1-ECB

Manaras Trolley Operator 3/4 HP 600V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6213-1-ECB

Manaras Trolley Operator 3/4 HP 240V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6432-ECB

Manaras Trolley Operator 1/2 HP 480V 3 Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
OTBH-6212-ECB

Manaras Trolley Operator 1/2 HP 240V 1Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
OSH-6212-ECB

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OHJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6532-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V 1Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6233-ECB

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6432-ECB

Manaras Opera-H 1/2HP 480V 3Ph with Electronic Circuit Board

Installation ManualSell Sheet
OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
37301

Reversing Contactor RM12 24VAC - ** NLA

  • No longer available.
  • Possible substitution # 37407
SHAFT017

Manaras Spacer for Trolley Tracks

16-5L300

LiftMaster Cogged Vbelt 5L 30"

CAP590

Capacitor 110/125VAC 590-708MFD

  • AC electrolytic capacitor
  • 21uf to 1200uf
  • 110VAC to 330VAC
  • -40 to 149 Degrees F
  • AC Electrolytic
  • Quick Connect Terminals
    • .......more details
12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

  • LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
  • Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
  • IP44 Rated Housing designed for outdoor environments.
  • Designed for outdoor environments
  • Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs
Installation ManualManuel d'InstallationSell Sheet
OSH-6113-ECB-LH

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

  • Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
  • Six 3' wired leads
Installation Manual
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
HSC-600-JAWS

Replacement Jaws for Hand Swager

  • Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
Installation Instructions
SN1150050

LiftMaster Main Processor Board for MiniKey

747

Fasteners Slotted Track Bolt 1/4-20 x 1" 1000/Box ** Unavailable

  • Knurled shank
  • Max torque = 6
780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
804

Fasteners Sleeve Anchor 3/8" x 4" 50/Box

  • Secure anchoring into concrete brick or block
801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

  • Secure anchoring into concrete brick or block
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
LA500DCS

LiftMaster Secondary 24VDC Actuator Arm for Dual Swing Gate Applications New Model

  • Includes 40ft cable and junction box
Installation ManualManuel d'installationSell Sheet
LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

  • Replacement actuator arm for single gate applications
Installation ManualManuel d'installationSell SheetBrochure
733

Fasteners Flat Washer 5/16" Zinc 1000/Box

OMH-6112-ECB-RH

Manaras Opera-MH 1/2HP 120V 1Ph with Electronic Circuit Board

  • A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
  • 14 cycles per hour 50 cycles per day
Installation ManualSell Sheet
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

ME00028

Micanan Input Shaft Heavy-Duty

K77-12486

LiftMaster Parts Box for Model MT/ BMT

CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

  • Complete electrical box
754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
IPAC

LiftMaster Internet Enabled Outdoor Access Control System with VoIP Technology

  • LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
  • By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
  • Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
  • Manage resident info from any browser on your LAN so you do not physically visit the unit.
  • VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
  • 50000-resident capacity so you’ll never run out of system memory.
    • .......more details
Installation ManualSell Sheet
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

  • 7/16" head
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

  • Full length thread
  • Max torque = 6
765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
AELD

LiftMaster Elite Plug-In Loop Detector

  • For use with Omni Control board available on the Chamberlain commercial line.
Installation Manual
29-31229

LiftMaster Relay 24VDC C Relay 1-Phase only

  • C-relay for model T operators 10A
114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

  • 7/16" head
  • Serrated
T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
1116633904.S

Overhead 4-btn Transmitter 390 MHz

  • Replaces the 1091303904.S
  • 4-channel transmitter opens and closes 4 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual
7001-8-CREAM

Commercial Side & Top Weather-Strip 8' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-12-SANDSTN

Commercial Side & Top Weather-Strip 12' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

  • For commercial operator model T
Installation Manual
MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

  • Brake assembly does NOT include the solenoid
1104-7FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 7' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

  • Plastic replacement box only