Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.289_3-3/4"-LH

Torsion Spring .289 x 3-3/4" x 12ft LH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
M-0131

Autogate Proximity (Limit) Switch

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
41D0216-2

LiftMaster End Panel with Light Socket

  • Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
  • Circuit board not included
MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

CANIMEX-H/CHAIN

Canimex Hand Chain 30.7 Zinc Plated Sold by Barrel Only 1000ft 126581

  • Unwelded Steel
  • For use with all Torque Force chain hoists
  • 30.7-19-5 sold in 1000' barrel
P-0128/LH

Autogate Retro Bracket Left Handed System

  • This is needed to change over to their current motor
MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

  • Electric motor only
PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

  • Includes 1 chain link
111503.0002.S

Overhead Gear Reducer 40:1 RHX

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

  • Polyester strap 2" wide
  • Work load limit 3335 LBS
TRANSF005

Manaras Transformer 120V-24V 40VA

  • Transformer 120V Primary 24V Secondary 40VA
60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
.234-3.5-11.25-RHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Right Hand

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V ** NLA

  • For residential opener MRE
ME117-M-BLK-U

Miller Edge 4-Wire Monitored Black Universal Outlet Sold by the Foot

  • Electromechanical slide in edge for 1" to 2" sectional doors.
  • Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation manualSell sheet
2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

  • Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.
1209

Whiting Roller Hinge Complete

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

7001-16-ANODIZED

Commercial Side & Top Weather-Strip 16' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-ANODIZED

Commercial Side & Top Weather-Strip 7' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
K76-36681

Liftmaster Replacement Antenna for STAR1000

  • This is an antenna replacement kit for the PPWR & STAR 1000
LJH-353-3/4

Doorlec 3/4HP 575V 3PH Jackshaft Operator

Technical information
CP100C

Coupler Specialty Coated 1" Bore

  • Coated with 1000 plus hr salt spray rated finish
  • 1" Bore with 1/4" keyway
  • Malleable iron for high strength and resistance to shock loading
  • Coupler halves separates and is adjustable
  • 4-(3/8"-16 x 1" square head set screws installed
  • Rust inhibitor coating
    • .......more details
7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
K30-205-E

LiftMaster Boot Red

  • Also known as: 30-205-E 30205E
  • Replacement button cover for 02-406 station
J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

.192-134-L

Cut-to-Length Torsion Spring .192 x 1-3/4" Left Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
K75-19981

LiftMaster Arm Kit Model H/HJ

  • Compatible with LiftMaster® Models H and HJ Commercial Door Operators
60-2730

AB 42GRU-9002 Nema 4 Retro-Reflective Photocell Exterior *** Obsolete

  • Voltage: 110VAC
  • Sensing Distance: 30 Feet
  • Comes with Bracket and Reflector
  • NEMA 3 4 4X 6P 12 & 13
  • Allen Bradley
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5 ***Discontinued

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
HAML-RCH-2030

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra

H14G02-BLACK

Hinge #2 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

  • Track use: 2" or 3"
  • Throw: 2.62"
  • Slide bar: 0.138"
  • Individually wrapped
2100-564

Linear Clutch Disk Facing HSL HSLG

12501

Doorlec Clutch Plate Aluminum 4" dia x 1" bore

  • Works with models EHJ and ETBH
112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

  • Three channels – three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with “F” connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
LZE500

Erone L & Z-Bracket for Maglock ESM500

26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

  • green replacement button for 8L5-OCS
K72-33889

LiftMaster Clutch Shaft Kit

  • Clutch Shaft Kit for MJ Jackshaft Operators
  • Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
  • Same as 308117101K 310115111 K7212589 K72-12589 71116121J
FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
JA383

FAAC Sprint 383 Board 115V

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

  • 144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
  • Also known as: 144B0018 144B18
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
50442

Doorlec Mushroom Push-Button Red for 1-Door

  • Capable of opening one door
  • NEMA 4 Enclosure
  • non-lockable
USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

  • Replacement board only for USVD-4X
HW0429-RH

SteelCraft Commercial Bottom Bracket Right Hand Only

  • Right Hand bracket only
  • Can be used for both 2" and 3" tracks
  • To be used on door tracks that are installed wide enough to accomodate the side cable pulley
  • Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
  • Adjustable cable can level door from the ground
  • Heavy gauge steel construction
    • .......more details
HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

  • Left Hand bracket only
  • Can be used for both 2" and 3" tracks
  • To be used on door tracks that are installed wide enough to accomodate the side cable pulley
  • Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
  • Adjustable cable can level door from the ground
  • Heavy gauge steel construction
    • .......more details
L-14-40-0-M

Cable Tie Standard 40 LB Black 14" Nylon 1000/pkg

  • Ultraviolet Resistant
  • Length: 14.50" / Width: .140" / Thickness: .058" / Diameter: 4.00"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
    • .......more details
K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
VPL-12

Autogate 12V Motor

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

  • Upgrade option
41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

  • Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
  • Compatible with Liftmaster 2575 3275 3575 and 3575S models
MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
41D9276

LiftMaster End Panel Logic Board

  • 041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
  • Compatible with WLED model
41D8859

LiftMaster Cover 8550WL WLED

  • Burgundy Replacement Cover.
  • This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017
Z9966

Deuer Cable Puller

  • Light duty wire and cable gripping tool
  • For wire 1/16" - 1/4" diameter
  • Recommened for residential use only
  • 1300 lbs. capacity
31117

Doorlec Sprocket 41B12-1" Bore. KW/SS

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
AM-PC

Linear Proximity Cards - Linear Format ACP00739 25/Pkg

  • The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
  • Passive operation
  • Low-cost
  • Durable
  • 25 piece bulk pack minimum order
  • Dimensions: 3.4" L x 1.9" W x 0.13" Thick
    • .......more details
FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

  • Must specify if L-retainer is required
MV-00049

Micanan AB Reflective Photocell GRU 115V with MK00480 bracket (60-2439)

  • Includes eye reflector and bracket
K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

  • Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

  • 3/4" x 17-5/8"
MGH-6535-ECB-LH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
2500-1980

Linear 3-Phase Motor Board

  • Motor board for "green board" generation OSCO gate operators.
  • For HSLG BGU GSLG VS-GSLG SLC and their variants
10PBJL

Jamb Push Plate SS with Handicap Logo Only

  • 1⁄16 inch thick stainless steel for maximum durability
  • Concealed fasteners to minimize vandalism
  • Compatible with both surface and flush mount boxes
  • Faceplate Material 16 gauge 304 2B Stainless Steel
  • Backplate Material 1⁄8 inch thick Aluminum
  • Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64
    • .......more details
PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • Roadside
  • For Curbside order part # 2807.171.200
MP00128

Micanan Up-Charge Track and #41 Chain for 10' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
PL-A22-BOARD

Lynx RPM Reader Board Proline

V7001-BLACK

Replacement Vinyl Only for 7001-Black 200ft Roll

  • Sold in 200 ft rolls only
BEA-10-BR3X

BEA Programmable 3 Relay Logic Module w/13 Functions

  • For use on automatic pedestrian doors access controls industrial automation and single-occupancy restrooms. •13 Functions Include:
  • Timer
  • Ratchet/Latching
  • 2 Relay Sequence + Inhibitor
  • 2 Relay Sequence + Door Position
  • Deactivation Timer
    • .......more details
Product guide
1005-1-3/8-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-3/8"
26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • Non-routed
  • .75" thick 7 ply exterior grade medium density plywood
  • Painted white
.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED