Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MOD081

Manaras Damp Environment Oil and Dust Tight Modification replaces N1 with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
MOD082

Manaras Hazardous Location Modification

  • For electromechanical control only
  • For indoor use in hazardous locations
MOD112

Manaras Limit Shaft Speed-Up #48/#410 Chain

  • Sprockets and chain are replaced in order to accelerate the ops limit shaft to increase the accuracy of the limit system for sectional doors 8ft H or less
  • For field upgrades use MODKIT112
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
MOD114C

Manaras Synthetic Oil Upgrade for MGH up to 1.5HP

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
MOD117

Manaras Special Application Chip Modification

MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

  • Add-on to a OGH operator
MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

  • Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
  • Includes Timer base and all required wiring
  • Detailed installation instructions are included
Installation Manual
MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
MODKIT027B1

Manaras Universal Aux. Output Module B070 Field Install

  • MODKIT027B1 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD070
  • Order MOD027B1 when ordered in conjunction with a commercial operator
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
MODKIT074

Manaras Hand Crank Field Modification Kit

  • For in-field upgrade on OGH and MGH operators
Installation Manual
MODKIT168A

Manaras Auxiliary Output Module

  • For connection of 24VDC LED light strips
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
    • .......more details
Installation Manual