Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
25-42-110

Extension Spring 7' Door - 110 lbs White

  • Double - Loop
  • 25" long 42" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
DM413

Cable Drum Standard Lift 12' 400-12 Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)
    • .......more details
SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

871-ZAP

Zap Interface Expansion Module Series II

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
TB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
GALV-306-334-144-R

Torsion Spring .306 x 3-3/4" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
HD3120

Commercial Inside Slide Lock for 2" or 3" track

  • Track use: 2" or 3"
  • Throw: 2-11/16"
  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • Same as part number 270
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation