Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
32-48-60

Extension Spring 8' Door - 60 lbs Brown ** check for availability

  • Double - Loop
  • 32" long 48" stretch 60 lb load
  • Springs sold individually
25-42-170

Extension Spring 7' Door - 170 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2525
26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: W #7515
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
903021ORBG

Operator Reinforced Bracket 21" Galvanized

  • Comes with clevis and clip pins. 24 per carton
4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

  • 5" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
TH827-24V

Erone 7-Day Timer 24V

  • 24V AC/DC input voltage with battery back-up
  • One "NO" contact and one "NC" Contact
  • Up to 8 ON and OFF switches a day (56 per week)
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
    • .......more details
Programming InstructionsInstructions de programmation
SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

  • Stainless steel construction
  • Round head design 11/16" head
RS1024

Roller 2" Steel 4" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 3.5" Overall Length: 4.5"
  • Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)
MM00158

Micanan Solenoid Lever HR Left

MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

  • Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
  • 5/8 - 24 10" limit shaft
  • For MSJ built before 2012 (green control box)
Drawing
2376.162_18.780

Whiting Torsion assembly .162 wire size 18" spring length 78" shaft

PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
LB1212-24

Laminated Bumper Standard Black 12" L x 24" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
OTBH-6213-AE05

Manaras Trolley Operator 3/4 HP 240V 1Ph with Elect. Circuit Board Apt. Model

  • A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 30 cycles per hour 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet
RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming InstructionsCompatibility chart
.319_2-5/8"-LH

Torsion Spring .319 x 2-5/8" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 6"
  • Length: 12 ft
26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
ST316COP

Copper Stop 3/16" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL316COP
MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

  • For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410
.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MHH-002

Magnetic Handle Set Black Set of 2

  • Decorative handles only
  • Black flexible magnetic material with deep embossed design
  • Mounts flush on door
  • Sold as a set of 2 handles
MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
  • Fits models: 2500 2580 3280 3850 3500
GAREX-PVC-W-12

Residential Side & Top PVC Weather-Strip with cap 12' Long (145") - White

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with snap-on cap to hide screws.
H503L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.319-3-3/4-LH-C

Torsion Spring .319 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 3-3/4" Length: 12 ft
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

2100-0054-UPS

Linear Bolt #41 Chain Tension

  • Used on various Linear Gate operators
TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

24040

Doorlec Roller Chain #40 Sold per Ft

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 343" Long
  • For Roadside order part # 2806.177.340
MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
    • .......more details
41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
SUPPORT008

Manaras Board Support 1" ** Special Order Only

PULLEY015

Manaras Double Pulley

E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

  • Used on the BL229 gate op.
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G03-SS

Hinge #3 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G01-SS

Hinge #1 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

  • RBand transmitter only
  • On board diagnostics allows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
  • Nema 4
    • .......more details
GALV-306-6-144-R

Torsion Spring .306 x 6" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
K41-0256-000

LiftMaster Interlock Harness IHSL24UL

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
HARNESS116

Manaras Opera ECB070 and Drive

BCSI-PM19

Pivin Drapeau Keyway 1/4 x 1" *** Price by Quote Only

BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

2300-697

Linear Idler Wheel UHMW

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 8′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

  • An original Whiting assembly
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

  • OPEN-CLOSE-STOP Push Button
  • Stainless Steel Enclosure
  • Buttons aligned vertically
  • Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
K72-12532

LiftMaster Output Shaft Kit J

  • Also known as: 308116010J 310-116010J 308116010JK 310116010J
  • Compatible with LiftMaster® Model J Commercial Door Operators
E/BLOP/118

Automatic Systems Option Double Limit Switch

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included