Devanco Canada - Get The Right Garage Door Opener‎ and Parts

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys
H=7" W=2-3/4" D=2-3/4"

3BXT

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation manual Sell sheet

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

PPLX

LiftMaster Stand Alone Proximity Reader ** NLA

6" read range
50000 user capacity
Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
Programmable as stand-alone or Wiegand pass-through
Simple-to-use handheld radio programmer (model PPRP; sold separately)
Programmable output relay (NO/NC)

.......more details

Programming instructions Sell sheet

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range)

Model Q45AD9LV same as part # 37620
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P
DOES NOT include the bracket or the reflector. Use MV00482 for the kit

.......more details

RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

URBAN-MR-R16

Garex Ready to Install Door Special Order

R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

OGH-6536-ECB

Manaras 2 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

114-0298

RW Support 18 x 33

Size: 18 x 33
Material: Formed Steel 3/16" thick
Finish Black Enamal

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

2100-0054-UPS

Linear Bolt #41 Chain Tension

Used on various Linear Gate operators

SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

Solenoid Included

BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

41011

Doorlec Brake Release Cable

Used on GH

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners
Black Nylon

.......more details

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

Replacement for capacitor037 on MOTOR256

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

Upgrade option

2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

112357.0004

Overhead Logic Board for RSX 575V 3PH

Fits OPRSXH75015BR

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

Fits OPRSXH75015BR

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

K41-0095-000

LiftMaster DC Motor Drive HD Gate

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

Ratchet bar only for the ratchet assembly#22-003769-1

SUPPORT008

Manaras Board Support 1" ** Special Order Only

12118

Doorlec Commercial Aluminum Sliding Carriage

Works on Doorlec trolley operators

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

Used on the BL229 gate op.

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

MC271-2W-RH-BLK

Miller Edge MC271 2-Wire Non-Monitored Right Hand Black Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

Also known as: 158060

TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

425-0090

RW Hanger 70 Flush Pull Steel Sold Individually

Formed Steel construction
Face: 7" H x 4-1/2" W
Pocket: 4-1/2"H x 1-3/8"W x 1-1/4"D

5-36-2

2" Vertical Track 14-GA 7'-3" (8' door) Sold per Pair

K76-34697-3

LiftMaster APS Encoder with Harness 12V

For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

07-8005

LiftMaster Crank Link Barrier Gate

Also known as: K07-8005 G078005
For use with various LiftMaster® Barrier Gate Operators

112357.0003

Overhead Logic Board for RSX 208 460 3PH

MOTOR257

Manaras Electric Motor TEFC for N4/12 1/2HP 120/240V 1PH

Continuous-duty base mount TEFC 60Hz
For N4/12 type operators

JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

10TD900INDHH2

BEA 2-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

An original Garex window
Fits 1-3/4" thick door R16

H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

RBand transmitter only
On board diagnostics allows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.
Nema 4

.......more details

K41-0252-000

LiftMaster Gear Reducer IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

Special Order Sold by Quote Only

S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

REDUCER012

Manaras Reducer DSM 70 44:1 FR56C

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

BCSI-PM19

Pivin Drapeau Keyway 1/4 x 1" *** Price by Quote Only

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

SHAFT048

Manaras Trolley Output Shaft

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
Output: N.O. N.C
Wire connections: Integral 18” wiring with #6 spade lugs
Antenna: Attached wire or F connector
LED Indicators: Power channel 1
Polycarbonate enclosure

.......more details

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection