Devanco Canada - Get The Right Garage Door Opener‎ and Parts

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

H14G06

Hinge #6 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#6 position
Use between sections 6 and 7
Same as part number 246

.......more details

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

SESMT03

Erone Wall Support for Transmitter

Wall support for one S2TR2641 transmitter
Color: Grey
Velcro and mounting hardware included

Wireless System Chart

OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OSH-6112-ECB

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

Installation Manual Sell Sheet

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 1 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).
Replaced by RADIO-RE900A

.......more details

Programming Instructions - ECB Programming Instructions - CONT

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

8331.96

Whiting Brush Top Seal assembly 96"

Fits Coldsaver and Tempguard

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

Black - for door thickness of 1-5/8"

1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

Black - for door thickness of 1-5/8"

1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

Black - for door thickness of 1-3/4"

1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

For door thickness of 1-5/8" to 1-3/4"
die # A-25388

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-3/8"

1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

For door thickness 1-1/2"

1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

For 2" thick doors.

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1003-1-3/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-18-BROWN

Commercial Side & Top Weather-Strip 18' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-14-BROWN

Commercial Side & Top Weather-Strip 14' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-14FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 14' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-10FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 10' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-14FT-SAND

Residential Side & Top PVC Weather-Strip with cap 14' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual fin vinyl

1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual-fin vinyl

1001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

Double - Loop
32" long 48" stretch 220 lb load
Springs sold individually

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

390 MHz 9 dip switch three button visor remote
Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
Visor clip & 12V battery included (ALK12V)
Same as 33LM
Can be used as a substitute for 63LMC

Programming Instructions Instructions de programmation

27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2523 for #2376 balancer

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

Retainer extrusion is constructed of high quality aluminum.
Panel mounted retainer
Cross Reference: T #69790 500000

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".
Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.

.......more details

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CBB532

Stop & Sleeve 5/32" 100 pair

Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

CBB18

Stop & Sleeve 1/8" 100 pair

Includes 100 stops and 100 oval sleeves

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G08

Hinge #8 x 11 gauge

11 gauge #8 hinge - 0.87 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

CBA18B07

Cable Assembly 1/8" 7x19 102" Sold per Pair

Galvanized cable assembly for a 7ft door (102" = 8'6")
Aircraft cable made of 19 wires per strand and 7 strands per cable
Sold as a pair
Same as part number 457

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

25-10275

Truck Door Universal End Hinge Flush Mount

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation.
Removable cover allows roller change without hinge removal
Includes: Hinge roller cover & kep nuts
Cross Reference: H-325716

6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Cable size: 1/8 "

7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

ME116-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide-in edge for sectional doors.
With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
ME116 is resistant to flame water and most common greases and oils
Soft ends
Temperature range -30F to 155F
Lead wire: 22 gauge universal

.......more details

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

19-5114-NP

LiftMaster Trolley Roller Chain Pack #41 for 14ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

Does NOT include the locking bars

Assembly Manual

PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
Can be replaced in-field

Instruction Manual

PRO-H-7543-U-LH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL