IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.
The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
Custom Coded. Must provide Facility Code and Start #
Includes 10 feet of signal hose outdoor air switch and hose plug
OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.
The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
The F210 photocells are available with relay output
The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
The cable connects to the antenna base on one end and the receivers F connector on the other.
If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
Compatible with all Linear receivers with Type F antenna connector
Apron: Laterally adjustable formed steel 11-3/4" l. x 4" w.
Pendant: 3/4" dia. square head bolt with adjusting nut zinc plated
Door Thickness: 1-3/4" to 2-1/4
Includes: 1 Pair in a box.
Included in each box:
12 flat head stove bolts 3/8" dia. x 2-3/4" l. for 150B1
12 flat head stove bolts 3/8" dia. x 4" l. for 150B2
2 carriage bolts 7/16" dia. x 1"â??long
1 lock joint clip for No. 33 track.
2 blinds for track ends
The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor
Upgrade option when buying a truck door aka Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.