Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SEA868

Erone Tuned Antenna 868MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

SEL2681R868-Z2

Erone 2-Relay Stand Alone Receiver 868MHz

Wireless System Chart

S2TR2681E2

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart

VBELT_4L300

Lynx VBelt 4L 30"

MK-00015

Micanan Fuse 2 Amp 250V Glass Sold per Fuse

MK-00010

Micanan 3-Pole Power Terminal Strip

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00141

Micanan Transformer 220V-24V-100VA

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MM-00332

Micanan L-Bracket Right Angle Front of Coil For Cornell Rolling Steel Doors

MV-00029

Micanan 110V Commercial Receiver NEMA-4 CR32E-110V

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

In closing cycle door will stop for 0.5 seconds and reverse to fully open

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00002

Micanan 2-btn O/C Nema-1 Pushbutton Control Station Metal

Surface mount

RBH103L5-RH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

PRO-J-10021-U-LH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Installation Manual (EN) Specification Sheet

.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

31128

Doorlec Sprocket 41B12 Plain Bore 1"

Plain bore (no keyway)

ALUM-532

Aluminum 24" x 100' Spool Almond / Amande # 532

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 532
Reverse side is #431 Bright White

Colour chart

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7511-U-LH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5023-U-LH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

SPRAY-5P6

Aluminum Touch Up Spray Paint 350g Iron Ore / Minerai de Fer #5P6

140g

.375-514-L

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-7543-U

Micanan 3/4HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7538-U

Micanan 3/4HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7521-U

Micanan 3/4HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MB-05504

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

60-7248-888

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 88-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Fabric Reinforced Tire Rubber
Galvanized Steel Sides
Size: 8" wide x 8" long x 8" high

60-7248-CMH94

Wheel Chock Safety Pkg incl'd: chock with integral handle wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CMH-94 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

27122

Doorlec Electric Motor 1/3HP 208/480/575V 3PH DC321

G50402

LiftMaster Timer Defeat Hold Open Switch 50-12860

Allows for the auto-close timer to be manually disabled

LR110LTB3815

Telco Thru Beam Receiver M12

Remote receiver Series 110
M12 x 1 Housing Size
Nickel Plated Brass Housing Material
15 m Cable Cable Connection
IP 67 Sealing Class

MP-00204

Micanan Splash Proof Covers PRO-H J HHD GH GHC (Fully Assembled)

drawing

MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

Used on various Micanan operators
2 required per operator

MK-00033

Micanan Transformer 575V-24V-40VA

SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

Ratchet Bar Not Included
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

MOUNTSHAFT010A

Manaras Hoist Shaft Kit for MJH (after-1998)

For MJH MJHW/C/X built from 1999-2003

748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#2 point = shorter cutting edge (more thread)

15480

Doorlec Heater Strip 175 W 575 V

LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB824-11

Laminated Bumper Black 8" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-14

Laminated Bumper Standard Black 12" x 14" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

Clipped ends
44" long 60" stretch 280 lb load

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

BPPVCT

Garex PVC White Transition Moulding 289" #3764

Universal garage door panel adapter molding
Use on any 1-3/4" door
Allows a Garex panel to be used as replacement on any brand door
24' lengths only can be cut for transport

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

Powdercoated Grey
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

HINGE-911-PCG

Powdercoated Hinge #9 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #9 - 0.89 lbs
Powdercoated Grey
For use with 7/16" stem rollers

Z9211-3

Stationary Cone Tool 3-3/4"

Easily dislodges the cone from the torsion spring

Z9211-1

Stationary Cone Tool 1-3/4" & 2"

Easily dislodges the cone from the torsion spring

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

For old 455 Automatic Doorman opener

MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

Fits T TB APT APTC J EJ H EHJ HHD SD

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

Used on PRO-GHC
4 required per operator

MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

Used on PRO-GHC
10 required per operator

SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

POWER: 115/208/230 VAC. Single Phase
ACCESSORY POWER: 24VAC 500mA max.
MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
Heater option: HTRNB or NTR460 for 460V operators
UL USAGE CLASSIFICATION I II III and IV.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Brochure Wiring diagram Schéma câblage

MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

2 required per machine

RB-1

Rubber Button Cover Red for 3BLM PBS

Rubber button cover only

CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

Not for use in aircraft applications
Type: T304

BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

37355

Reversing Contactor 120V Coil (replaces cd-11)

COLLAR004

Manaras Collar 5/8"

.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

TRACK-SET-2LH-138

2" Tracks Set 7'-0" Low Headroom Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

ALUM-556

Aluminum 24" x 100' Spool Forest Green / Vert Foret # 556

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

BRACKET111

Manaras Hood Mount Angle Bracket

MOD060-14FT

Manaras Auxiliary Trolley #41 Chain Modification Only

Provides drawbar operation of a standard lift door with the use of a jackshaft operator
Includes tracks for doors up to 12' high. Additional fee for over 12'
Maximum door width 22'

BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

ALUM-5P4

Aluminum 24" x 100' Spool Metallic Gray / Gris Metallique # 5P4

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P4
Reverse side is #431 Bright White

Colour chart

Q209

LiftMaster Gear Reducer Pulley K17-50223

DC-1000 1/2" ID

27089A

Genie Washer

Drive shaft washer for PMX500

40-3505-FR

LiftMaster Warning Sign Aluminum French

MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

2 set screw 5/16

9006-10

Excalibur Threshold Kit 10'2" x 6" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts