Devanco Canada - Get The Right Garage Door Opener‎ and Parts

38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
The extension kit is designed specifically for Genie belt drive openers.
Belt and instructions included
Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift

MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

19-50106M

Chain # 50x106 (5-1/2') with Master Link

Also known as: 350120 199023
106 links

26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

Knurled shank
Max torque = 6

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

New model # 210131 no cover is needed
Metal Gear

TILT-5

Tilt Detector

State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
Safeguards against rolling steel door failure where conventional devices miss
Automatically stops the operator to keep door within safe parameters

Sell sheet

EQ2712

SkyLink 3/4 HP Garage Door Opener with 1 Remote ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive

Installation manual Sell sheet

41A5021-5I

LiftMaster Electronic Circuit Board Assembly 390MHz *** NLA

1 piece logic board with end panel
Used on 390Mhz Security+ AC belt drive operators made from 1997 to 2005.
Unit will have a red/orange learn button
Also know as 41A5021-D 41A5021-5E 41A5021-5F 41A5021-5G 41A5021-5H 041A5021-5I

7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

120 volt input power plugs into a standard outlet
16VDC output 2.5 amps

CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

Special order

5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

07-8058

LiftMaster Crank Link BG790

12-1028

Strip Curtain Clear Smooth Low Temp. PVC 8" wide Cut to Length

8" wide .080 thick
Cut-to-length and pre-punched

TRANSF037

Manaras Transformer 240/208-24VAC 40VA

Transformer 240-208V Primary 24VAC Secondary 40VA

HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

Heater kit for pad mount 460V AC gate operators.
Includes transformer
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame

24-230-5

Relay 3 PDT 230V 7A

208/230VAC relay
Used in BG770 gate operators

Q085

LiftMaster Dolly Cover HCT K09-50756

Same as K09-50756

28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

Fits Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
For door opening less than 90" high
Fits door sizes 72 - 90" high
Cross ref: T #49014-1 T #41034-1 & W #4046

.......more details

COUPLING019

Manaras Manual Hoist Coupling

For Opera-SH

801-300-002-00

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz Pre-2016

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

201-300-301-00

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz. Pre-2016

Open/Close/Stop remote for 1 door
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation - prior to 2016

Programming Instructions Instructions de programmation

M4A

Safety Inertia Brake 1-1/4" Bore 3576 Torque PCM4AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Fits 1-1/4" shaft
Normal Torque: 3576 lbf.in
Locking Torque: 17516 lbf.in
Made in Italy

.......more details

Reference manual Technical data Sell Sheet

15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

Same as 50B12x1

71-EB120H

LiftMaster External Brake Solenoid 120V with Cable

TS-15

Tarp Strap Bungee with Galv. S-Hooks 15"

Made of 100% natural rubber from Sri Lanka
Galvanived S-hooks
15" safely stretches to 23"

41D0843

LiftMaster Replacement Motor and Sensor 12VDC

For Craftsman garage door opener

SETR2641AM2C

Erone 2-Channel Mini Transmitter Dark Red 433MHz

Heavy-duty construction
Elegant & easy to carry
Light grey and dark red base with dark red buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

PMR10RGT

Carlo Gavazzi Retro-Reflective Sensor

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
5 Wire

.......more details

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

CB116A0500

Cable 1/16" 7x7 500' Galvanized

Galvanized cable 1/16" 7x7 500ft spool.

SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

41A6569

LiftMaster Safety Sensor Mounting Kit

Replacement brackets only for 41A4373A safety eyes

MK-00042

Micanan Overload Reset 1-Phase 13 Amps

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

TAPS1458W

Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer

Priced per each

H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

374UT

LiftMaster Universal 2-btn Mini Transmitter

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
This mini remote is NOT compatible with DIP switch remotes or receivers

Programming instructions Sell sheet

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

Kit contains: Straight arm Curved arm and hardware bag

C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

For do-it-yourself installation use part no. SF600-114

19-5114-NP

LiftMaster Trolley Roller Chain Pack #41 for 14ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

11202

Doorlec Cap Screw 1/4"-20 x 4"

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

Open/Close up to 3 doors or Open/Close/Stop one door
Heddolf-Keystone 3 button transmitter 311mhz
8 3-Position dip switch format
9V battery and metal clip included
Compatible with Allstar 3 button T-833
Same as P220-3K

.......more details

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

MH00008

Micanan Collar 3/4" ID

2 required per door

OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

Open/Close remote for 1 door
Dip switch led 9V battery and metal clip
Compatible with Allstar 1 button T-931 and T-931-M
New style transmitter case

REDUCER025

Manaras Reducer 45:1

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

K20-1050B-2LP-H24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 3 Logic 4 Logic 5

Standard 1/2 hp motor for new L5 operators

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

ST-ACTIVATOR

Soft Touch Activator

Same as ST-PRIMER
Used to make the glue dry faster
Approx 10 ounces 300ML spray can

ST-GLUE

Soft Touch Glue 1oz/25g

For use with Soft Touch Profile
1 oz

CP-BRG-58

Lynx Bearing 5/8"

6 in total on a MCJH

VBELT_5L340

VBelt 5L 34"

Fits Lynx HDC operator

MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz ** Discontinued

UL325
Works on the new Lynx operators
For 3 doors

Programming Instructions Compatibility chart

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

Z9205

Door Scale Arm

Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
Set door on shaft and multiply scale reading times 5 to give you the door weight
Bathroom scale not included

Drawing

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

26966A

Genie Idler Pulley for Stealth Chain Drive

Fits Genie Stealth model
1/4” bore
Channel style rails

28773A

Genie Idler Pulley for Belt Drive

Fits PMX500-I B/C Belt & Chain drive model
Front Pulley for belt channel applications only.
Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
Part Numbers: 28773 28773AS 28773S 38773A

PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

PBS3-RED

Replacement Button Only - Red

Replacement button for 02-403P

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

19X7 rotation-resistant wire rope.

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

10-11021

LiftMaster Disconnect Lever GH

MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

Modification when purchased with an operator
#410 CHAIN WITH FRONTIDLER ASSY
CHAIN HOIST ASSY
HOIST KIT FOR TROLLEY HOIST CHAIN

Drawing

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details