Devanco Canada - Get The Right Garage Door Opener‎ and Parts

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

K75-10214

LiftMaster Straight Door Arm Kit

For use with various LiftMaster® Commercial Door Operators.
Complete kit includes: straight arm emergency rope with handle and warning label
Also known as: 41K3681 7510214 453405 75-10214 305105003 1C3681 1C3428

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

MP00215

Micanan Limit Shaft Assembly N1 H/J

CP-PW-NM-34

Lynx Pocket Wheel for HDC

2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

WHTG-TEMPGUARD

Whiting Special Order TempGuard Door **POR

Special order to customer's specs
1-1/2” fiberglass panels are clad with aluminum exterior facing for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
One piece pultruded fiberglass shell featuring foam-in-place urethane insulation.
All hinge fasteners reinforced with steel backing plates.
Replaceable double seal at each panel joint.

.......more details

N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

106141

Marantec Shaft Adapter

K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
Will also work on L3 L4 operators

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

MI00018

Micanan Motor Pulley LD 4L 1.5" x 5/8" ID

Used on the motor shaft for a 4L v-belt.

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

Q238

LiftMaster Gate Adjustment Switch K75-50339

This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING

Q200

LiftMaster Chain Coupling Release K07-50215

For Liftmaster trolley operator HCT

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
Unit will feature a yellow learn button

41A4353-1

LiftMaster Header Bracket and Clevis Pin

CGH151L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1-1/2 HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except if a Mod is added
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

0/7140/499

Automatic Systems Frequency Drive ATV 12 0.37KW 120V

Frequency drive for AS1620
Only available for G2

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

Powerful extra quiet and energy efficient 1/2 HP motor
115V / 1 Speed
Durable super lightweight and compact Polypropylene housing design
ETL/CETL Safety Certified

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Easy to install and setup with the ULTRAMETER™ sensitivity display
Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
Fits into small operator housings saving space size: 80 x 23 x 84 mm
10 sensitivity settings

.......more details

K75-37549

LiftMaster Disconnect Kit for SL595U

Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
Allows manual operation of your gate operator

328-729

Lip Shock Absorber Dock Leveler

Used to control descent of dock leveler lip
1/2" holes are 10.4" center compressed 16.25" when extended

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

SPRING001

Manaras Cam Guide Plate Spring

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

CAP475

Capacitor 125VAC 475MFD

Motor Start Capacitor 125V 475 MFD

31355

Doorlec Sprocket 80B14

50690

Doorlec Clutch Assembly for ETBH

37380

Doorlec Auxiliary Contacts BF9 Contactor

K75-32463

LiftMaster Clutch Kit for SL595U

Compatible with model SL595U Slide Gate Operators

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

31104

Doorlec Sprocket 41B23-5/8"

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

5/8" x 10-3/8"
Same kit used for MCJH except the HCT has 1 extra nut

PL-A22-BOARD

Lynx RPM Reader Board Proline

MH00096

Micanan Flange Bearing 3/8" ID

Replaces MH00019

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

2500-562

Linear Tokens for Token Acceptor 1000/pkg

Token only

MH00075

Micanan Shaft Collar 5/8"

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

MG-00054

Micanan Plastic Spacer for Boards (Medium Length 0.768)

MK-00039

Micanan Overload Reset 1-Phase 10 Amps

MK-00223

Micanan Transformer 460V-110V-100VA

MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

Flush mount

PRO-J-10081-U-RH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.283-514-R

Cut-to-Length Torsion Spring .283 x 5-1/4" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

PRO-J-5053-U-LH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5081-U-RH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

PRO-T-7525-U

Micanan 3/4HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-TB-5081-U

Micanan 1/2HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5038-U

Micanan 1/2HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5011-E

Micanan 1/2HP 115V 1P Trolley Operator NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7243

Standard Caution Sign English 12" x 24"

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

2528.093

Whiting Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
For Whiting balancer #2376

SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

Ratchet Bar Not Included
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

HRB-9

High Riser Bracket for 7" Above Dock or Higher 9"

High Riser 9" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

Reinforcement bar 2-1/4"
20G

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

Reinforcement bar 2-1/4"
20-GA

LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-14

Laminated Bumper Standard Black 12" x 14" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login