Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SBX-N1-P-5011JH

Micanan Control Box PRO-H

  • Dimensions: 11" x 8" x 5" h
SD755L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

  • These panels are cut to customer's exact measurements.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

MM00159

Micanan Solenoid Lever HR Right

070032-0000

Overhead Double Drive Pulley

MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

  • PRO-H/HB operator parts
  • 2 required per operator
MK00642-NM

Micanan Full Feature Circuit Board with Contactor Interface Non-Monitored 575V (MK00737)

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
SS-1-1/4-24

Solid Shaft 1-1/4" Keyed 24 ft Zinc ** To Extent of Inventory

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
DM413-COATED

Cable Drum Standard Lift 12' Specialty Coated 400-12 Pair

  • Use for Commercial Standard Lift Doors
  • Maximum Door Height 12'1"
  • Lifting Weight Per Drum 375 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
  • Thermally Stable Coating
    • .......more details
MP00055

Micanan Track and #410 (#48) Chain for 10' h Door *Actual length 150"*

  • For 1/3 & 1/2 HP Micanan trolley operators
PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
GM-809

Gear Master

  • Holds shaft assembly for easy removal of roll pins
  • Makes changing gears easy
C-24-12-2-W

Thermal Window 24" x 12" for 2" Door White

  • For 2" thick door
9150000624

1/4" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
MK-00605

Micanan Double Limit Switch

PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

SL14COP

Copper Sleeve 1/4" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST14COP
PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

  • A one piece travel module replacement kit.
  • Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
  • Same as 041D7742-5
K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

  • This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
  • Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
  • Same as 001D9039-1CC
PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • 1/2HP to 2HP Motors
RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

MM00155

Micanan Disconnect Arm PRO-HR

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

  • Generates new code each time you push the button these codes never to be repeated.
  • 99.99% works with most brands of garage door openers.
  • Ideal replacement for older or obsolete models.
  • Electronic scanners "code grabber" cannot duplicate the operating code.
  • Easy to install & program.
  • Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).
    • .......more details
LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
41A5047

LiftMaster Door Bracket Kit

  • Also known as: 12C582 12B198 12B374 062265 41A5047 12B374-2
  • Includes door bracket clevis pin and lock ring
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow T-astragal
  • Width: 4-3/8"
1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

  • For door thickness 1-3/4"
MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

990TP626

Trim for Panic Bar 98EO626

  • Trim for Panic Bar - 98EO626
G108019

LiftMaster Arm Clamp PVC

  • Used in connection with arm # G651209P
41A6298

LiftMaster Hardware Installation Bag for 3800

2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

  • Usable length is measured between the shoulder and the cotter pin
108D79

LiftMaster Light Lens 108D0079M

  • Replaces 108D68 and 108D68-1
SL332-ZP-COPPER

Zinc Plated Copper Sleeve 3/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP. Stops are not zinc plated
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
    • .......more details
Sell sheet
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

  • Ideal for residential weatherstrip
MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

K001C3196-3

LiftMaster Antenna 315MHz

  • Fits SL595
41A2825

LiftMaster Opener Assembly Hardware Kit

  • Kit includes screws for various residential chain drive models
7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

  • Bottom seal sold separately
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

  • Same as SN000099-30-2
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

  • SPST
  • 2 mounting holes
  • Dimensions: 2.375 x 0.875 x 0.75 inches
  • Color: Light Gray
  • Intended for indoor use
BL-08

Barlock Kit Complete for 8ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (49-1/2")
Assembly Manual
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

  • Knurled shank
  • Max torque = 6
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

  • 24-240 VAC/DC
  • 35mA/125mA at 24VAC
  • 20mA/60mA at 110VAC
  • UL listed to UL325 standards
  • NEMA 3 4 12 Outdoor Rating
  • 40 ft. sensing distance
    • .......more details
2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
CP-ARM-OLD

Lynx Auto Re-Connect Carriage Arms Only New Style 20-1/2" *** Discontinued

  • Arms only for CP-CRG-OLD
CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

  • Arms only for CP-CRG-NEW
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
37314

Doorlec Relay Mini 120V

  • For overrun pre-wired 25 Amp
74-4SG1A

Fuse Slow Blow Miniature Glass Fuse 2AG 1A 250V 5/Pkg

  • 4.5 x 15mm miniature slow-blow glass fuse
  • Rated voltage: 125V/250V
  • Rated current: 1.0A
  • RoHS compliant
  • 5 per package (clamshell)
5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-12'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8034

LiftMaster Female Rod End LH

  • Upper rod end for BG770 BG790
  • Same as part # 12-8034
SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

  • Required when ordering pre-cut torsion assemblies with cones
50030

Doorlec Key Switch with Spring Return in Waterproof Housing

  • Weatherproof start key switch
  • Nema 4 enclosure.
  • Cast aluminum base with tamperproof aluminum cover
  • Rating: 10 amps 124VAC
  • Contacts: Single pole silver alloy momentary contact
  • Two keys supplied with each switch
    • .......more details
SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 8' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

  • Includes POCKETWHEEL005 CAM012 and CLIP020
MOUNTSHAFT016

Manaras Clutch & Hoist Shaft Kit for Opera-SH

  • Input / clutch shaft kit for Manaras Opera-SH
M4A

Safety Inertia Brake 1-1/4" Bore 3576 Torque PCM4AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Fits 1-1/4" shaft
  • Normal Torque: 3576 lbf.in
  • Locking Torque: 17516 lbf.in
  • Made in Italy
    • .......more details
Reference manualTechnical dataSell Sheet
2B639

LiftMaster Speaker for EL25 (41B0639)

  • 1B0639
PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
71-EB120H

LiftMaster External Brake Solenoid 120V with Cable

71-EB208H

LiftMaster External Brake Solenoid 208V with Cable **to extend of inventory

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** No Longer Available

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

  • Replacement Key ONLY qty: 1 only
NIR-HD

EMX Industries NIR Hood Cover Steel

  • The hood keeps rain and other debris from distorting or blocking the photo beam.
  • It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
  • Replaces the mounting bracket that comes with the sensor.
  • Comes with Hood two sets of nuts and bolts and a plug