Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
K72-19979

LiftMaster Clutch Shaft Kit 2005 +

  • Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
2806.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Roadside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Roadside
  • For Curbside order part # 2807.139.140
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
23-2015

Limit Switch DPDT 15A 125/250VAC (K23-2015) *** No Longer Available

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

  • Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
11801

Doorlec Oilite Cam

  • Fits 5/8" shaft fine thread.
  • Grooved 5/8" - 24 x 3/8"
  • Requires 2 per cam shaft
32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

  • Double - Loop
  • 32" long 48" stretch 70 lb load
  • Springs sold individually
H14G06

Hinge #6 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #6 position
  • Use between sections 6 and 7
  • Same as part number 246
    • .......more details
.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
19-48ML-NP

Master Link #48 Nickel Plated **To extent of inventory

  • For #48 chain
50695

Doorlec Clutch & Pulley Assembly for EHJX (Includes: 1 clutch shaft_ 2 bearings_)

  • Includes shaft and bearings
2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

MV00295-A

Micanan Fraba Ray-RT UL325 Monitored Reflective Photocell Supplied in Lieu of N-1

  • Only available with purchase of operator
2705.139.140

Whiting Curbside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .139 wire size
GALV-TEST-CUT-TO-LENGTH

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MRGH-6437-M-N1-LH

Manaras 3 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
2806.192.290

Whiting .192 x 2-3/16 x 29" Roadside with Cones

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

  • Fits OPRSXH75015BR
26141-NEW

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

  • Fits the new larger box
GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

  • Mounting plate for GH op
2376.162.18.960

Whiting Torsion assembly .162 wire size 18" spring length 96" shaft

2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

2376.187*31.950

Whiting Torsion assembly .187 wire size 31" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
K11-8061

LiftMaster Main Shaft (1)

  • Also known as: 11-8061 118061 G118061
  • For use with various LiftMaster® Commercial Gate and Barrier Gate Operators
2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

510.4302.06

Whiting Stainless Steel Interior Hdwr Pkg 4 Rows Hinges 6 Panel

  • This is an Add-On option when buying a truck door
2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
ETBHW-311-3/4

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

  • 18 tooth sprocket for #50 chain
7470.100

Whiting Side Seal for insulated doors 100" Long

  • Fits Coldsaver and Tempguard
SL585503UL

LiftMaster Industrial Slide Gate Op.1/2 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

  • High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
  • Operator Duty Rating: 20 cycles per hour
  • Wormgear Reduction: 20:1 Wormgear Reducer
  • Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
  • Chain: #50 nickel-plated (25ft. supplied)
  • Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments
    • .......more details
3BXT-BLACK

Replacement Button/Switch Only - Black

  • Replacement button for 3BXT
3BXT-RED

Replacement Button/Switch Only - Red

  • Replacement button for 3BXT
TILLY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Tilly design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
GX-138-S-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Woodgrain with 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
PREMIUM-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Short Panel - Available in white or black steel - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: Three AAA batteries
    • .......more details
CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

218-45-10

PVC Connector for 3/4" - 3/32" RAH

S2TR2681E2

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

Examples of ends on mini storage springs
44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 300 lb load
K94-36934

LiftMaster Main Wiring Harness L5

SPR50B14X1

Sprocket 50B14 for a 1" Shaft 1/4" keyway

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

Examples of ends on mini storage springs
BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4
  • Brake installed on operator
Installation manualManuel d'installationSell sheetBrochure
BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • External brake included
  • Comes with CPS-UN4 photoeyes
Installation manualManuel d'installationSell sheetBrochure
5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

  • 41.25" long = 160 coils
2KW

Rolling Steel 2" Curved Continuous Windlock *** No Longer Available

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
SOLID_SHAFT_21'

Solid Shaft 1" Keyed 21 ft Galvanized

  • Actual length is approx. 21'-1"
.343-5-1/4-SQ-R

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Right Hand

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

  • Knurled shank
  • Max torque = 6
SSZP9-6

Solid Shaft 1" Keyed Zinc Plated 9'-6"

SSZP5-6

Solid Shaft 1" Keyed Zinc Plated 5'-6"

CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand **No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

  • Wireless RF Digicode® keypad.
  • Frequency: 433.92 MHz.
  • For automatic door opening in sequential mode.
  • 6 channels to control 6 different relays or 6 different RF receivers.
Programming InstructionsWireless System Chart
.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
MJ00001

Micanan Brake Shoe - Left **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

  • Double - Loop
  • 32" long 48" stretch 150 lb load
  • Springs sold individually
Spec Sheet
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
.343-3-1/8-SQ-R

Cut-to-Length Square Wire Torsion Spring 24.75" long NO Cones Right Hand

PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)
2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
2704.139.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .139 wire size
JHDC12X1N4XMC

LiftMaster MAXUM with NEMA4X Jackshaft 3/4HP 120/240V 1PH DC Operator 100 Cycles/Hour 1200LB ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
BPPN17512

Garex Bottom PVC Moulding Black for 1 3/4" Door U Shaped 120" (10')

MSJ-6213-M-N1-LH

Manaras MSJ 3/4HP 240V 1Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
    • .......more details
MRGH-6437-M-N1-RH

Manaras 3 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
RXTA-100

Pulse 2-Channel Receiver

  • Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
  • Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
  • 9-30Vac/dc input.
  • FCC approved.
2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

59174.0265X91-1/4

Todco Original Counterbalance Assembly Special Order Price by Quote Only

  • Made to Order for Serial #30662431-1
.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

Examples of ends on mini storage springs
MIRF-Z2-50

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
.207-3-8.25-RHW

Mini Storage Spring .207 x 3" x 8.25" long Right Hand

Examples of ends on mini storage springs