Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

  • For door thickness: 1-1/4"
DMB51CM24

Carlo Gavazzi Mini Multifunction Timer

  • Mini DIN Rail Mount Multi-Function Timer
  • 24VDC and 24-240VAC/DC Supply Voltage
  • 0.1 Seconds to 100 Hours Timing Ranges with Six Sub-Ranges
  • Diagnostic LEDs
  • Only 17.5mm wide
MV00482

Micanan Banner Intrinsically Safe Reflective Photocell Kit w/Bracket & Reflector (0-25ft. Range)

  • Kit icludes the bracket (MV280) and reflector (MV279)
  • Model Q45AD9LV
  • Range: 9 m; Input: 5-15V dc
  • Output: NAMUR
  • 2 m (6.5 ft) cable
  • Nema rating: NEMA 6P
    • .......more details
K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

  • For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators
MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

K77-19130

LiftMaster Hardware Kit LA400 LA412

K94-37871

LiftMaster Reset Switch and Harness SL595

  • For model SL595 slide gate operators
3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

  • Polyester strap 2" wide
  • Work load limit 3335 LBS
ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
TRANSF005

Manaras Transformer 120V-24V 40VA

  • Transformer 120V Primary 24V Secondary 40VA
60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

620-101293

Linear Apex II Module

  • Newer model from Jan 2016
  • The APEX II is backwards compatible but you will need to add monitored external entrapment devices.
029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

  • Complete Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
  • Price varies according to size
2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

  • A Whiting original
30-94225

Truck Door Bottom Panel w/ Seal & Retainer (15" x 98") Steel Clad White Enamel Finish

  • 1/2" thick (13mm) composite panel consisting of a high density polyethylene (HDPE) core between two galvanized steel skins
  • Baked on white enamel finish
  • Black E-coat/powder coat spring assisted steel lock eliminates door bounce
  • One-piece extruded rubber head seal
  • Tongue and groove joints
  • Stainless steel rivets/black e-coat/powder coated components
    • .......more details
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
K081C0168

LiftMaster Screw Drive Rack

  • Also known as: 081C0168 81C168
  • This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240
SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

  • 140g
KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

  • Powerful extra quiet and energy efficient 1/2 HP motor
  • 115V / 1 Speed
  • Durable super lightweight and compact Polypropylene housing design
  • ETL/CETL Safety Certified
RADIO-RE901

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver

  • For Commercial/Industrial Garage Door Applications
  • Wall Mount
  • DIP Switch and Rolling Code Technology
  • Sixteen (16) Fixed Codes / Receiver
  • 313 MHz Radio Frequency
  • Controls One (1) Door
    • .......more details
Programming instructionsManualSell sheetManual
MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

  • Activates one MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming instructionsInstructions de programmation
BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

  • They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
  • A pillow block bearing could be used if needed
  • Includes (1) RH and (1) LH plate
G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

  • Fits the SL575 & SL585GL gate operators
  • Same as K19-48055MB
WLMODULE002

Manaras Univ. Aux Output Module BOARD070

MOUNTSHAFT015

Manaras Hoist Shaft Kit for OGH

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 2" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
ManualTechnical dataSell sheet
30005

Doorlec Brake Solenoid 208V with wire leads

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

50442

Doorlec Mushroom Push-Button Red for 1-Door

  • Capable of opening one door
  • NEMA 4 Enclosure
41A3011

LiftMaster Pulley Only for Cable Pulley Bracket

  • Also known as: 144A12 144B16
USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

  • Replacement board only for USVD-4X
SETR2641AM2BP

Erone 2-Channel Mini Transmitter with Paradox Tag Blue 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

  • SL3000 new style hand crank pocket to store hand crank (crank sold separately)
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
7-2326

RW Pull Cord Kit

  • 4-3/4" x 4-3/4" anchor for bracket and clip angle
WASHER014

Manaras Type A Plain Washer 5/8

27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

  • Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
  • 1725 rpm built-in reset
510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

  • Upgrade option only - must accompany a door order
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
10PBJL

Jamb Push Plate SS with Handicap Logo Only

  • 1⁄16 inch thick stainless steel for maximum durability
  • Concealed fasteners to minimize vandalism
  • Compatible with both surface and flush mount boxes
  • Faceplate Material 16 gauge 304 2B Stainless Steel
  • Backplate Material 1⁄8 inch thick Aluminum
  • Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64
    • .......more details
PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
2807.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Curbside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • For Roadside order part # 2806.171.200
SSSS-1-6FT

Solid Shaft 1" Keyed Stainless Steel 6 ft

  • 303 series Stainless Steel
K94-37848-1

LiftMaster Electric Motor 1HP

  • Replacement motor for SL595101U
SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

  • 350g
  • Replaces Gentek #801
26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • Non-routed
  • .75" thick 7 ply exterior grade medium density plywood
  • Painted white
2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
K20-3200C-5

LiftMaster Electric Motor 2 HP 575V 3PH CF

  • Also known as: 20-3200C-5 K20-3200C5 K20-3200C-5-H27
2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

  • Available in Black White or Yellow
  • Stand not included
40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator

  • Charges the gate access system battery using solar power
  • Ideal for remote and sunny areas without access to an AC outlet
  • Replaces the need for gate access system transformer
  • Can be mounted to almost any fence gate or post
  • Mounting bracket and hardware included
  • Contains (2) SOLPNL20W12V solar panels
    • .......more details
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

  • Normally Open
  • SGR13-193-028-D1-E-HS8-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NO relay output 15m cable
Specification sheetWiring diagram
.375-334-L-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.363-514-L-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-514-INSTALLED
.363-334-L-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
.343-334-R-C

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-258-R-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.331-258-R-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-6-L-C

Cut-to-Length Torsion Spring .319 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.319-258-L-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.312-6-R-C

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-6-L-C

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-514-R-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.283-2-R-C

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-L-C

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-134-R-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-L-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-2-L-C

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-258-R-C

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-134-L-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
PRO-GH-10053-PNL

Micanan 1 HP 575V 3P Gearhead Operator NO CONTROLS

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5053U-R

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-HHD-5021U-L

Micanan 1/2HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
2705.206_325

Whiting Curbside Torsion Spring 2-3/16" ID 32-1/2" Long

  • Torsion spring wire only
  • .206 wire size
PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
PRO-HB-5081U-RH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters