Devanco Canada - Get The Right Garage Door Opener‎ and Parts

101475

Insert Bearing 1-1/4" Bore SB206-20

102079

Flange Plate PFL6Z PFL206

2 required per bearing # 101475

OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

41A2770-17

LiftMaster Hardware Kit for 8550 8160W

Universal Hardware bag for LiftMaster 8550 8160W Operator.

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

N/C Contact "Stop"
Push to Stop Turn to Unlock
NEMA 4 Enclosure

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet

DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size
Available colors: Wayne Dalton White Glossy White Mist White Black Contemporary Brown Bronze Buckskin Desert Tan Polar Blue Pacific Blue Royal Blue Teal Bright Green Hunter Green Fern Green Sea Green Cedar Red Violet Red Patriot Red Silhouette Grey Yellow Maroon Harvest Orange Sunset Orange Tangerine

Sell Sheet Drawing

37561R

Genie Belt and Bullet Assembly 7ft

For 7' Tall Doors Only
Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
SilentMax 1000 (3042) SilentMax 1200 (4042)

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing

HBS3U

Stainless Steel Bottom Fixture 3" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 3" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters included

.......more details

HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Fits Most Overhead Sectional Doors
Priced Per Each

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt
5-1/8" hole center to hole center distance
3500 lbs load rating

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** To extent of Inventory

Board: Tri-band Security+ 2.0l
Fits: 8550W
001D8363
Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363

MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

K20-1050B2LPH24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Standard 1/2 hp motor for new L5 operators

K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

36764A

Genie Chain and Belt Pulley (#39591A)

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Both for Chain and Belt Openers
Front Idler Pulley for Genie 4024
New part number #39591A

104255

Allstar Clip only for 8833TC

Clip only

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

MD-00035

Micanan Offset Link #410

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation manual Sell sheet

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

ST-GLUE

Soft Touch Glue

For use with Soft Touch Profile
1 oz

ST-ACTIVATOR

Soft Touch Activator

Same as ST-PRIMER
Used to make the glue dry faster
Approx 10 ounces

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

8087.225.310

Whiting .225 x 2-5/8 IN x 31" Curbside with Cones

An original Whiting assembly

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

601332.0001

Overhead Sprocket 14T 1/4P x 3/8D

Fits Overhead JST drawbar model
Sprocket attaches to the limit shaft

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

27-8004-K

LiftMaster Aux. Contact Block Relay

2-NO/ 2-NC Contacts
Used on 03-8024K contactor

CP-BRG-58

Lynx Bearing 5/8"

6 in total on a MCJH

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

2 in total on a MCJH

NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

Extended range for better performance in rain and snow
Compact design mounting hardware and indicators make it easy to install
Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
Watertight package for reliable outdoor installation

.......more details

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

VBELT_5L340

VBelt 5L 34"

Fits Lynx HDC operator

109441.0002

Overhead Complete Limit Switch Assembly JST

Replaces part number 109441.0001
Replacement has 3 limit switches

38416A

Genie Belt Drive Sprocket

Works for the following Belt Drive models: Relia-G 600 (model 1024) Relia-G 800 (model 2024) QuietLift 600 (model 1042) QuietLift 800 (model 2042) Overhead Door (model 1026) Overhead Door Legacy 800 (model 2026)
14 tooth belt sprocket for Genie and Overhead Door belt drive garage door openers
Solid metal upgraded replacement sprocket

MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

PRO-H-FRAME

Micanan Frame for PRO-H

29202

Doorlec Transformer 550Vpr 120V sec. 35VA

20456R

Genie Pulley Support Kit *** No Longer Available

Front metal clip with pulley
Front idler for use with Genie and Overhead Door T-rail systems

ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart

R5206

Saddle Support for 5" Pulley

11 gauge galvanized steel

RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming Instructions Compatibility chart

CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
For 3 doors
Not compatible with the new 372HMz residential operators

Programming instructions Compatibility chart

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

UL325
Works on the new Lynx operators
For 3 doors

Programming Instructions Compatibility chart

R5205

Saddle Support for 4" Pulley

8 gauge galvanized steel

25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

Black plastic construction
Cross ref.: 39504-2

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

Voltage: 12VDC/24VAC/DC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-1/2"

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

22306

Programmable 7-Day / 24 Hr Timer

118798

Marantec Trolley Assembly (Slider)

Replaces #8030177 and #803178
Replacement trolley assembly for chain & belt rail assemblies
Fits Marantec opener models: M4500M4500eM4700M4700eQ7500Q7700
Works for 7' 8' & 10' high doors (red pull cord rope can be adjusted to length accordingly)
Note: will not work for the Heavy Duty (2mm-14ga.) rail assembly
Same part number as 91570

.......more details

510.3228.07

Whiting Double End Hinges DF Mild/Nylon - 7 Panel Door Add-On Option

dd-on option when ordering door.

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

BOARD070MR

Manaras Replacement Control Board (Monitoring)

On-board 390MHz radio receiver accepts 50 remote controls

Replacement Chart Guide de remplacement

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

26966A

Genie Idler Pulley for Stealth Chain Drive

Fits Genie Stealth model
1/4” bore
Channel style rails

26966D

Genie Chain Pulley

Front idler pulley for full chain models ie..PMX500
Fits a T-rail
Diameter: 2-3/8"
7/16” bore
For use with t-style rails

1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

111854.0001

Overhead Logic Board for RSX 1/2 Hp 115/208/230V 1PH

Description: KITPCB1PH1/2HPSX/HXUL10
For RSX ad RHX models 1/2 Hp Single phase operators

Replacement Instructions

.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
Includes Timer base and all required wiring
Detailed installation instructions are included

Installation Manual

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

EXA-2000

Linear Directional Antenna (AAE00331)

Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range
Directional remote antenna designed to enhance the radio range of Linear receivers
Includes 10 feet of coax
Clamp for mounting
Dimensions: 21” W x 5” H x 1.5” D

.......more details

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you