Devanco Canada - Get The Right Garage Door Opener‎ and Parts

S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

Sold individually

BCSI-PM20

Pivin Drapeau Sprocket 50B12 *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

HAE00087

Linear Safety Beam Sender & Receiver with Wire

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.
Replaced HAE00002

MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
Output: N.O. N.C
Wire connections: Integral 18” wiring with #6 spade lugs
Antenna: Attached wire or F connector
LED Indicators: Power channel 1
Polycarbonate enclosure

.......more details

SHAKER-XL-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

SPR50B54X1

Sprocket 50B54 for a 1" Shaft

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Lead Wire 12 in. 22 gauge SJTO

.......more details

GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

202-0003

TNR Knock-Away Plate (Lasercut) for 10lb/ft Bottom Bar **** Price by Quote Only

3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

OPEN-CLOSE-STOP Push Button
Stainless Steel Enclosure
Buttons aligned vertically
Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to RGH ops

.......more details

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
Its careful design helps minimize signal losses thus ensuring optimal quality on each output
Frequency: 5 - 3000 MHz
Special order item price may vary depending on availability.

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

CGH155L5-RH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

2110-236

Linear Shaft Output Assy HSLG Ups

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

K177A0112

LiftMaster Trolley Spring

Also known as: 177A112 62274 177A0112 062274 132C2180 177A78

SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

70598.000

Todco 1" Nylon WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB

GALV-375-334-144-R

Torsion Spring .375 x 3-3/4" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-258-144-L

Torsion Spring .283 x 2-5/8" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

BEA-10PS12-24

BEA Power Supply UL/ULC Listed

2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

.......more details

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

ox Quanity is 18 per box

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2400-416

Linear Dowel Pin .3752 dia x 2" Long

2400-501

Linear Retaining Ring

202-0019

TNR Bottom Bar Arm Black Harness 75D (2622126) ** Price by Quote Only

same as 2622126

MT21-2M-YELLOW-E

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Yellow End Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

31369

Doorlec Sprocket 60B12 1" Bore

GALV-312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED
Galvanized

GALV-375-6-144-RH

Torsion Spring .375 x 6" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
24V class 2 control circuit with 40VA transformer to protect against short circuit
On board receiver with antenna
External radio control terminal strip
Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
Continuous duty industrial motor with overload protection

.......more details

Installation Manual Specification Sheet

SHAFT117

Manaras Output Shaft for OSH

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-273-258-144-L

Torsion Spring .273 x 2-5/8" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-295-334-144-L

Torsion Spring .295 x 3-3/4" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-363-6-R

Cut-to-Length Torsion Spring .363 x 6" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

CAPXS

LiftMaster Smart Video Intercom - S

Designed with small multi-tenant buildings and single family gated homes in mind.
With the myQ Community app residents can see who is at the door before granting/denying access.
Integrated wide-angle camera: Lets you view entrance through a live feed or recorded event.
Integrated BLE radio enabling myQ Mobile Credentials: Ultra-secure encrypted access with the resident’s smartphone.
Cloud-based security: Keeps data protected and safeguards residents’ information. *All LiftMaster Smart Access Solutions (including CAPXLV CAPXLV2 CAPXM CAPXS CAP2D and CAPAC) require monthly subscriptions to a myQ Community plan.

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

Hardware kit for articulating arm models MA024 and MA034
Articulating arm hardware kit
Arm sold separately

B680H

FAAC Barrier Gate System ** Price by Quote Only

BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Oerating termperature: -22-140F

.......more details

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

EGRESSKIT001

Manaras Egress Device + Hardware

AX25-ZAP

Zap Cogged VBelt AX25

XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

Includes LMRRUL Retro-Reflective Monitored Photoeye
Compatible with LA400 LA412 LA500
Does NOT include the battery or harness. A12330SGPLK sold separately

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

185002

Marantec Maveo Bluefi Stick

The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)

MINI-218-3-10-LH-W

Mini Storage Spring .218 x 3" x 10" LH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

1-9/16" OD 5/64" Width
Replaces BEARING025

CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

K07-8007

LiftMaster Arm Hub for BG770/790

Also known as: G078007 07-8007 078007

OSH-6533-M-N1-LH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

DM54-COATED

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs
Maximum cable diameter: 3/16"

.......more details

37350

Reversing Contactor CUL - 16 Telco 24V

OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

BOARD070MRSH12R

Manaras Replacement Control Board (Monitoring) RSH/RMSJ/RTBH 120V

On-board 390MHz radio receiver accepts 50 remote controls

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

PHOTO-076

Manaras Reflector 2" x 2" For Use w/ PHOTO-075

689-LCN

LCN Door Closer 4040-XP Aluminum Finish

Cast iron cylinder with full-complement bearing
3/4" diameter piston
Double-heat treated steel pinion journal
All-weather Liquid X fluid
LCN Patented Green Dial spring force indicator
Universal non-handed

.......more details

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 27" Long
For Roadside order part # 2806.177.270

D-2-5

Keyed Disconnect Device 5ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

VKP1-LM

LiftMaster MyQ Video Keypad

Create unique PIN codes and schedule access for family guests and service providers
Visual Confirmation: Get peace of mind by seeing that loved ones have arrived home safe and sound
Receive real-time notifications and view history of when the garage has been accessed by members of the household
Easy Installation: Enjoy wireless setup with a rechargeable battery and integrated Bluetooth® for fast Wi-Fi® provisioning
Call Button: Unexpected visitors can initiate 2-way audio communication with the myQ account owner to request access
Compatible with LiftMaster Chamberlain Craftsman AccessMaster and Raynor garage door openers made after 1993

.......more details

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

41A5507-6

LiftMaster Receiver Logic Board for 2500B/D (390 Mhz)

With end-panel
Also known as 41A5507-6C 41A5507-3


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login