Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
OSH-6533-CONT-R

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
Q222

LiftMaster Control Board for MIR-1 (K001A5868) ** NLA

  • For Miracle-One single operator - one arm
  • Same as K001A5868
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
BK314

Jamb bracket J-14 #14 12 gauge

  • Sold by the piece
  • Height 5.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK302

Jamb bracket J-02 #2 12 gauge

  • Sold by the piece
  • Height 2.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

  • Actual length is approx. 17'-1"
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
SEL2641R433K8PM

Erone 800 User Receiver 433MHz

  • Multi-user receiver
  • 800 two-channel transmitters + 7 master transmitters
  • Includes 1 master transmitter S2TR2641E2M for programming
  • 12/24V AC/DC
  • Option: PC software kit # SEL2641KITP8 sold separately
  • 1 NO relay + 1 NO/NC relay
    • .......more details
Installation manualWireless System Chart
P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

  • Open/Close mini remote for 1 door
  • 8 dip switch
  • Allstar compatible
Programming Instructions
MGR20-Y-2U-06

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
MODKIT074

Manaras Hand Crank Field Modification Kit

  • For in-field upgrade on OGH and MGH operators
Installation Manual
SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

  • Must specify exact length required when ordering
OGH-6436-ECB

Manaras 2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6435-ECB

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

  • Designed to operate in areas with explosive environments.
  • NEMA 4 and 7 housing
  • NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
  • Copper free Aluminum with Epoxy finish.
  • Potentiometer range adjustment to allow more precise tuning to site.
  • Through beam design is not affected by shiny surfaces.
    • .......more details
Installation ManualSell Sheet
201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Year 2016 +
Programming InstructionsInstructions de programmation
MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

  • ase mount
Wiring diagram for 120VWiring diagram for 230V
OTBH-6434-1-ECB

Manaras Trolley Operator 1 HP 480V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6433-1-ECB

Manaras Trolley Operator 3/4 HP 480V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OSH-6432-ECB

Manaras Opera-SH 1/2 HP 480V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OSH-6232-ECB

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OHJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6433-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6212-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 240V 1Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6434-ECB

Manaras Opera-H 1 HP 480V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
T105L5

LiftMaster 1 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

OPJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
41A5615

LiftMaster Chain Spreader

  • For models 2575 3575 3275 PD752 PD758 and others
24701R

Genie Chain Drive Dog Limits 3-PKG

  • Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
  • Replaces the clip-on limit switch
  • Limit dogs external rail-mounted limit switches
9150000628

5/32" Stops ONLY 100/pkg

  • Stops only - 100 per pack
36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
35616R

Genie Dual Frequancy Intellicode Receiver Board

  • For models: PCG500ML PCG700ML GCG350ML 2020L
  • Works on 315Mhz and 390Mhz
82-NH25-03

LiftMaster Set Screw only

  • For 1/4-20-03
747

Fasteners Slotted Track Bolt 1/4-20 x 1" 1000/Box ** Unavailable

  • Knurled shank
  • Max torque = 6
780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

  • Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
  • 5/8 - 24 10" limit shaft
  • For MSJ built before 2012 (green control box)
Drawing
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
MH00007

Micanan Shaft Collar 1" I.D

MOTOR274-WIRED

Manaras Electric Motor 3/4HP 575V 3PH Wired

  • Motor and brake come wired •This item is compatible with BRAKE011
29-10338

LiftMaster Capacitor 70uf 230V 60Hz

  • For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011
MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600
.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
    • .......more details
Installation ManualSell Sheet
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
786

Fasteners Hex Nut 1/4-20 1000/Box

796

Fasteners Keps Nut 1/4-20 1000/Box

  • Lockwasher & nut combination
794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

  • Equivalent to 14-ga in strenght
99551NYHNG

Nylon Hinge Black #1 *** To extent of inventory

  • Equivalent to 14-ga in strength
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
SSZP6-6

Solid Shaft 1" Keyed Zinc Plated 6'-6" ** to extent of inventory

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
K75-10387

LiftMaster Slider Assembly for APT

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H755L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
41B4103

LiftMaster Service Belt Tensioner

10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

  • Fits model H operator with Logic 5
  • This item is now only sold in a kit. To order use code K72-19979
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
41C168

LiftMaster Transformer

  • For model 8500
  • 120V / 150 VA
  • 24VDC output voltage
  • Also known as 41C0168 041C0168
7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-12-CREAM

Commercial Side & Top Weather-Strip 12' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
41AC175-2

LiftMaster Electronic Circuit Board Assembly

  • For Sears / Craftsman garage door opener
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1104-12FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 12' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg ** To Extent of Inventory

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

  • Up to 100 000 individual codes
  • Mounts to wall or gooseneck post
  • Incl. 6-volt alkaline battery
  • Illuminated stainless steel faceplate and keypad
  • Tamper-resistant case and "low battery" indicator
  • Requires 412HMC receiver
    • .......more details
Installation ManualSell Sheet
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
7FT-CHAIN-LDO

Linear 7ft Chain Rail for LD050/LS050/LDCO (HCT7C)

  • 7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual
4A1008

LiftMaster Master Link #48 Kit (2 sets)

  • For #48 chain
  • Kit (2 sets)
305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

  • Fits SL595
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring