Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
  • .......more details
.283_1-3/4"-LH

Torsion Spring .283 x 1-3/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 1-3/4"
  • Length: 12 ft
9V

Battery 9V Alkaline Duracell Procell sold individually

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 6"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.192_1-3/4"-RH

Torsion Spring .192 x 1-3/4" x 12ft RH Silver

  • Wire size: .192
  • Inside diameter: 1-3/4"
  • Length: 12 ft
12563

Doorlec Upper Brake Shoe - Right

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
  • .......more details
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
DISCONNECT001

Manaras Floor Level Disconnect Lever

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

  • 100ft spool of vinyl insert.
1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

  • Black - for door thickness of 1-5/8"
1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

  • For door thickness 2"
1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

  • For 2" thick doors.
1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
1104-18FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 18' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Sold by full case quantity (12)
7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

  • Double - Loop
  • 32" long 48" stretch 200 lb load
  • Springs sold individually
32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

  • Double - Loop
  • 32" long 48" stretch 100 lb load
  • Springs sold individually
25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

  • Double - Loop
  • 25" long 42" stretch 270 lb load
  • Sold individually
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

  • Cast aluminum construction.
  • Provides easy method to adjusting spring tension.
  • Cross Reference: T #59158 T #51041 W #4050 340100
26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Flexible PVC material
  • Cross Reference: W #1676
25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

  • Wide grip design
  • Black E-coat finish
  • Works with both Whiting and Todco Doors
Z9005

Shaft Key Straight 3" X 1/4"

  • 3" Straight Key
  • Zinc Plated Steel
DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

  • 28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
  • Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.
  • .......more details
SF258

Spring Fitting 2-5/8" Pair

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .3310".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
  • Winding bar hole 1/2"
  • .......more details
CB3160500

Cable 3/16" 7x19 500' Galvanized

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
903024ORBG

Operator Reinforced Bracket 24" Galvanized

  • Comes with clevis & clip pins. 12 per carton.
BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

  • Sold as a pair
  • Box quantity: 30
4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

  • Actual length is approx. 9'-1"
LVB620-11/P1

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
CBI-29

Wheel Chock CBI-29 Cast Ductile Iron

  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
1715.20

Whiting Stainless Steel 2-Hole Grab Handle

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
  • .......more details
LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • .......more details
27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

MB-01202

Micanan Electric Motor Only 1/2HP 575V 3PH Base Mount FR56

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-3/8"
AELD

LiftMaster Elite Plug-In Loop Detector

  • For use with Omni Control board available on the Chamberlain commercial line.
27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Clamp includes nuts
  • Cross Reference: W #2526 for both #2376 & #7176 balancers
35616R

Genie Dual Frequancy Intellicode Receiver Board

  • For models: PCG500ML PCG700ML GCG350ML 2020L
  • Works on 315Mhz and 390Mhz
.262-258-L-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
12-000I-KEY

Spare Key for American Access Keypad

  • Spare key only for model 12-000I
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
GH505-L5

LiftMaster Gearhead with Brake 1/2HP 575V 3P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
1006-1-3/4-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
K72-12493

LiftMaster Limit Switch Kit

  • Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
  • For logic control MT BMT MJ MH MHS
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved
27121-480V

Doorlec Electric Motor 1-1/2 HP 480V 3PH DC223C

BCSI-PM206

Pivin Drapeau Traction Chain #50 BCSI Gate Operator Sold per Foot ** Price by Quote Only

10TD433HH2

BEA 2-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
MX000585-0

HySecurity Smart Touch Controller Board

  • Easy Installation Configuration
  • Warning Buzzer and Alarm System
  • Ethernet Connectivity via HyNet Gateway
  • Security Monitoring and Breach Reporting
  • Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator
O02R9508

AirLift U Cup

MGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
7909212

FAAC Control Panel Main Circuit Board for FAAC 844

F210B

NICE Adjustable Synchronised Photocells w/Blue BUS Technology Sold as a Pair

  • Pair of synchronised Photocells with built in transmitter for 8k2 resistive safety edges.
  • Transmitter is powered by one 3.6 V battery.
  • Receiver with BUS Connection.
  • 210 degrees horizontal adjustment and 30 degrees vertical.
  • F210B can only be connected to 'BlueBUS' networks
PDC300-34-1-40-20

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • the PULSE 300 Series is recommended for large high-cycle sectional doors rolling steel doors and light springless applications.
  • It’s an ideal solution for balanced doors up to 1580 lb./500 ft²
  • The 40:1 ratio is recommended for most balanced commercial applications.
  • 90V horsepower rated DC motor
  • If power fails the included 9Ah batteries takeover for continued door function
  • The built-in battery backup system eliminates the need for a chain-hoist but one can still be ordered as an option if desired.
  • .......more details
BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
  • .......more details
26142

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

  • Explosion Proof rotary shaft 1.59cm x 18.4cm
2200-027

Linear Chain #41 Master Link

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

  • Padded arm for MASDCBB3
R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

  • Set Screw: 5/16 x 18
  • 1" ID
TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
210264

Skylink Case Cover Atoms

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • .......more details
50308

Doorlec Cam Shaft Assembly Comes With Bearings

  • Fits LJ LJH SGO
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
Z9408

Coupler 1" Bore Adjustable Black 170634

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.50"
  • Painted black
K41-0082-000

LiftMaster HD Motor Replacement Kit

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only