Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
K74-31243

LiftMaster Kit SVC MOV

9150000629

3/16" Stops ONLY 100/pkg

  • Stops only 100 per pack
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
BOARD070MR

Manaras Replacement Control Board (Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
Replacement ChartGuide de remplacement
SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

  • High gain superheterodyne receiver
  • High RFI immunity
  • Supplied with F-connector whip antenna and mounting bracket
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MU22-2WIRE-U-Y

Miller Edge MU22 2-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

URBAN-MR-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
OGH-6536-ECB

Manaras 2 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
PRO-HBH-7521U-R

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

12-000I

Secure Brands Keypad with Intercom Post Mount

  • Post mount with Intercom
  • RemotePro KP 26 bit wiegand output keypads
  • Available in three different mounting configurations: post single gang or flush.
  • All single gang RemotePro KP models are available with a silver aluminum faceplate.
  • A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
  • Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.
    • .......more details
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2200-150

Linear Chain #41 Sold per Foot

BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
38000063

Tork Winch Electric Motor 1HP 115V 1Ph

  • Replacement electric motor for TW 1200
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

  • Replacement for capacitor037 on MOTOR256
50308

Doorlec Cam Shaft Assembly Comes With Bearings

  • Fits LJ LJH SGO
3257

Whiting General Purpose Bottom Seal #80841

  • Quote required prior to sale to ensure correct fit
WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

  • Ratchet bar only for the ratchet assembly#22-003769-1
028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

MQ00009

Micanan Set Screw 1/4"-20

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)
D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

  • Adjustable cable attachment with screw
  • Made of aluminum
  • High Lift capacity: 120" max
  • Flat capacity: 266" max
  • Rating: 2200 lb per door max
  • Keyway: 1 KW of 1/4" width
    • .......more details
TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
5-36-2

2" Vertical Track 14-GA 7'-3" (8' door) Sold per Pair

K76-34697-3

LiftMaster APS Encoder with Harness 12V

  • For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL
BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
D1101KH

DoorBird Surface-Mount IP Video Intercom SS V2A Brushed

  • Video intercom including surface-mounting housing
  • LAN connection (PoE compatible)
  • 2-way audio
  • Ultra-wide angle lens 1080p night vision IR LEDs
  • 4D motion sensor
  • Keypad
    • .......more details
D1101KH_Installation_ManualSell Sheet
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

10TD900HH3

BEA 3-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

  • Laser-based sensor system for automatic swing doors.
  • Time-of-flight technology used to eliminate the limitations of infrared-based devices.
  • Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
  • Provides asjustable pattern depth.
  • Min/max door width: 20"-48" from leading edge of sensor LED
  • Mounting height: 75"-98" from finished floor to sensor LED
    • .......more details
BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

10SSTI

BEA Active Infrared Presence Sensor

  • Active infrared sensor for industrial environments.
  • Applications: automatic industrial doors gates and automation.
  • Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
  • Can be mounted on stationary or moving objects.
  • Can be used individually or daisy-chained with up to 8 other modules.
  • Can be used on narrow and wide doors.
    • .......more details
2110-700

Linear Idler Assy Large Gate

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

  • For Maxum ops
MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Chain Spreader for Maxum for 1" door shaft
BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

  • Replaces BEARING044
8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

  • An original Whiting assembly
E/1907/012

BLG76 Backup Spring Assembly

OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
MD-00033

Roller Chain #60 10' per Pack

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
15-50B22QGH

Sprocket 22 Teeth 1-1/4" Bore 1/4" Keyway w/SS

2110-236

Linear Shaft Output Assy HSLG Ups

19-50ML-SS

Master Link #50 Stainless Steel

GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K41-0083-000

LiftMaster Bridge Rectifier HD Gates

  • For use with various LiftMaster® Heavy Duty Commercial Slide and Swing Gate Operators (HDSL24UL & HDSW24UL)
178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
HW0777

Low Headroom Quick Close Device 3" track Sold as a Pair

  • Includes 1 RH & 1 LH bracket
  • Heavy Duty for doors up to 16' x 16'
S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (10) sets of 2
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
K75-17034

LiftMaster Heavy-Duty Straight Door Arm Assbly

  • For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators
BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

  • Bracket only for modular LED lights.
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet