Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
29140

Doorlec Transformer 230V pr 120V sec 50VA

  • 230V primary 120V secondary 50VA
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
10FALCON-EXW100

BEA Falcon Wide Explosion Proof HSG 100ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX Wide can be mounted from 11 ½ – 21’ to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX W: 30’ × 11’ @ 21’
  • Operating termperature: -22-140F
    • .......more details
GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

  • For Maxum op
K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

  • For Maxum Trolley 1200 Op
GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

K41-0253-000

LiftMaster Electric Motor INSL24UL

  • Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators
GALV-225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
E/0172/166

Automatic Systems Spring Assembly

CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
E/BLOP/118

Automatic Systems Option Double Limit Switch

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

  • Length: 15" Width: 5.0MM (0.187")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

  • Mounting plate for GH op
GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

  • Mounting holes: 0.275"
15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
  • For gearhead operator
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
MV00080

Micanan Emergency Egress Device 15ft

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC7-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #48 chain pack (TDC48-10) ***Actual length 155"***

  • Double Angle Rails for doors up to 10'6" high
  • Includes #48 chain pack
041-0347-000

LiftMaster Camera Replacement Kit

  • Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.
P-9931R

Pulsar 1-Channel Receiver 318 MHz

  • Allstar compatible
  • Single channel receiver
  • 24V AC/DC
  • 8 dipswitches 318 MHz
PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
343

Cable Clamps Galvanized 3/8" Sold per piece

  • Galvanized malleable cable clip
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
ManualSell Sheet
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
  • Comes with carwash modification and tracks/chain for doors up to 12ft
    • .......more details
41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

  • Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers
GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-331-334-144-L

Torsion Spring .331 x 3-3/4" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
GALV-225-2-144-LH

Torsion Spring .225 x 2" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized
K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

  • Also known as: G233001 233001 23-3001
  • For use with various LiftMaster® Commercial Gate Operators
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
XF208VAC7

LiftMaster 208V Transformer Kit 700

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

  • To be used with the BEA-10LIGHT modules.
User GuideDatasheet
2200-540

Linear Replacement Key for BG Snap Lock

DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

  • Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
  • R-VALUE: 12.12 / 16.12
  • WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.
2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2200-015-UPS

Linear Collar Set 1B 9/16 LTB

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

VGD-RB-1/2T-10

VGD Red Beast Lever Hoist 1/2 Ton 10ft Chain ** Price by Quote

  • Compact design
  • Light weight robust construction
  • Fully machined lifting wheels
  • Grade 80 alloy load chain
  • Sealed bearings
  • Triple spur geared guarantees ef cient/reliable operation
    • .......more details
GH4416-50

Green Hinge 5-Panel Commercial System Set

  • The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
  • Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
  • Reduces dirt dust bugs rain & moisture
  • Quick and Simple installation
  • Fits Residential & Commercial Doors
  • 100% Made & Assembled in the USA
    • .......more details
ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

  • Used on the BL229 gate op.
OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
SB257B2

NICE Filter Board w/T3.15A Fuse

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
510.1010.00

Whiting Custom Color Premium Topcoat Paint Option

  • Option for Dry Freight Doors
FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

  • MOD073
K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

  • Replacement motor for SL595103U and SL595103UL
1104-16FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 16' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compatible colour
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GALV-375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
50450

Doorlec Mushroom Push-Button Red for 3-Doors

  • Capable of opening three doors
  • NEMA 4 Enclosure
40655R

Genie Garage Door Opener LED Bulb LEDB2-R 1/Pkg

  • LED: Long life low energy
  • Universal - works with all major brand garage door openers.
  • Eliminates or reduces remote interference.
  • Vibration and shatter-resistant up to 5Gs of shaking force.
  • Light appearance: 4000 K (neutral)
  • Brightness: 800 Lumens
    • .......more details
GALV-273-258-144-L

Torsion Spring .273 x 2-5/8" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-144-R

Torsion Spring .273 x 2-5/8" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CT755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Op with Carwash Mod Logic 5

  • Low profile trolley operator with brake included
OGH-6534-M-N1-RH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details