Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

10-10190

LiftMaster Brake Release Lever

  • Replacement lever for model SD
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • .......more details
TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • .......more details
LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • .......more details
LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
  • .......more details
LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
  • .......more details
LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
  • .......more details
MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

HINGE-711-PCG

Powdercoated Hinge #7 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #7 - 0.87 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
Z9211-1

Stationary Cone Tool 1-3/4" & 2"

  • Easily dislodges the cone from the torsion spring
MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

  • Used on PRO-GHC
  • 4 required per operator
OTBH-6232-AE06

Manaras Trolley Operator 1/2 HP 208V 3Ph with NM Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
108135.0003

Overhead Serpentine V- Belt for JST 26"

  • Overhead Door commercial garage door opener serpentine belt 108135-0003 included in the "speed-up" kit for sidemount only
  • Type "J" 26"
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
MD00001

Micanan Bevel Gear 20 Tooth 3/4" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
110956.0001

Overhead Brake Band Kit for RMX

  • Brake band kit for the Overhead Door RMX commercial operator.
H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
OSH-6232-ECB-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

  • Pan head
.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

CB-1.115

Whiting Stainless Steel Cable 115" L with Black Grommet 5/16" Eye 1 Cable

  • 7x7 stainless cable
  • Sold per cable
.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-GHCB-30053

Micanan 3 HP 575V 3P Gearhead Operator with Brake No Controls

9006-08

Excalibur Threshold Kit 8'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
  • .......more details
9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
  • .......more details
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
5001-14-WHITE

Residential Side & Top Weather-Strip 14' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
HBS23LUD-H

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Heavy-Duty Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
  • .......more details
.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
MK01245

Micanan Fuse 3A 250V Sold Individually

  • For Micanan circuit boards
  • Sold per fuse
PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX4.S GIDFX4.S
BOLT016

Manaras Hex Bolt 1/4-20 x 4

1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
  • .......more details
47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060
PRO-HBH-5011U-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

MD-00137

Micanan Roller Chain Waterproof #41 10' Pack

36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 105" h
  • Price varies according to size
.207-3-7.5-LHW

Mini Storage Spring .207 x 3" x 7.5" long Left Hand

K75-19977

LiftMaster Disconnect Kit Model J SL575

GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
  • .......more details
APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

  • Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
  • As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units
SBX-N4-P-0000-FD

Micanan Control Box Eurodrive Limit Box

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
MK00709

Micanan Varistor Harness 460V with Red Wires

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

  • These panels are cut to customer's exact measurements.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
SHAFT116

Manaras Input Shaft for OSH

2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
  • .......more details
27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
MP-00008

Micanan Two-Door Interlock Modification

  • Only allows one door to be opened at one time
MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

  • For 3/4 & 1 HP Micanan trolley operators
PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

  • Provides for hand crank operation in lieu of hand chain and pocket wheel
MK-00605

Micanan Double Limit Switch

WHITING-PANEL

Whiting Special Order Replacement Panel Only Price by Quote Only

  • Special order to customer's specs
PRO-H-5011U-RH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
TMQ-GRG826-80:1

Grove Gear Gearbox Current Model 80:1 Ratio Assembly D 56C

9281431440

Spring Wire .289 x 2.625 x 144" Coated RAW RH

  • .289 x 2-5/8" x 12'
9271431440

Spring Wire .289 x 2.625 x 144" Coated RAW LH

  • .289 x 2-5/8" x 12'
MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
12131

Doorlec Brake Disc 4" x 5/8" Keyway

  • Fits Doorlec model SGOH
PRO-TB-7553-U

Micanan 3/4HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks
  • Full function Smart 10.0 logic control board featuring on-board receiver
  • #41 roller chain drive
  • Solenoid brake standard
  • External radio control strip
  • Three button O/C/S control station Nema-1 included
  • .......more details
510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

  • Upgrade option only - must accompany a door order
K32-10540

LiftMaster Gear Reducer 20:1 SL595

  • Same as 32-10540 32-55011 32-5501-1 G3255011
34101

Doorlec V-belt Pulley 9" x 5/8" bore

  • Fits model ETB-3
PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

  • For door thickness 2"
G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
990TP626

Trim for Panic Bar 98EO626

  • Trim for Panic Bar - 98EO626
1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

  • Dual sprocket assembly for 3/4 HP chain drive operators.
  • Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
  • For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

  • Usable length is measured between the shoulder and the cotter pin
K10-30699-1

LiftMaster Chain Cover Mounting Bracket with Cover

SPRING026

Manaras Trolley Arm Disconnect Spring MGH

.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
DM518-COATED

Cable Drum Specialty Coated Standard Lift 18' 5250-18 Pair

  • 18' standard lift with special protective coating.
  • Features bimetallic corrosion protection
  • 1000 hr. salt spray performance
  • Abrasion resistant chrome free excellent corrosion protection
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • .......more details