Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

TAC1

LiftMaster Single Line Telephone Access Control with Radio

The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
Provides wired communication and secure access control at the gate or door.
Measurements: 6" h x 8.75" w

Installation Manual Programming Instructions

T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

Low profile trolley operator with brake included

Installation Manual Manuel d'Installation Sell sheet Brochure

MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

For door thickness 2"

1715.20

Whiting Stainless Steel 2-Hole Grab Handle

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

M4A

Safety Inertia Brake 1-1/4" Bore 3576 Torque PCM4AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Fits 1-1/4" shaft
Normal Torque: 3576 lbf.in
Locking Torque: 17516 lbf.in
Made in Italy

.......more details

Reference manual Technical data Sell Sheet

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

1104-12FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 12' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

For old 455 Automatic Doorman opener

1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

SLT-TT

Rolling Steel Thermotite Slat Foam Injected

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

19-10929

LiftMaster Hoist Chain Sold by the Foot

and Chain for LiftMaster commercial hoist operators

TXTA-200

Pulse 3-BTN Transmitter 315MHZ

Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
Provided with visor clip for forklifts and trucks.
FCC Approved

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

3-5273

Serco Pusher Assembly AB1000

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

10TD900INDHH1

BEA 1-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
This module is particularly suited for overhead doors using retracting reels or coil cords

1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
Bearings: 2 hardened steel disc bearings
Finish: Complete hinge black enamel
Fasteners are not included

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

24VDC (1/2 HP equivalent) motor
The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop

.......more details

BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

For use on Techna gate operator

Installation Manual Manual d'installation

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

.......more details

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

Price by Quote Only

MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

Add-on to a OGH operator

112357.0003

Overhead Logic Board for RSX 208 460 3PH

K94-37848-2

LiftMaster Electric Motor 1.5HP

Replacement motor for SL595151U •1.5HP 1PH 120/208-240VAC

TRACK-SET-2LHR-F

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Front

Complete set - torsion front

10TD900INDHH2

BEA 2-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

RBand transmitter only
On board diagnostics allows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.
Nema 4

.......more details

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

BCSI-PM22

Pivin Drapeau Hex Bolt 3/8-16" *** Price by Quote Only

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

10TD900HH3

BEA 3-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

E/BLOP/123

Automatic Systems 3 Kits of Two LED Lights on Arm Option

Increases visibility of the arm on BL229 gate operator

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

10FALCON-EXW100

BEA Falcon Wide Explosion Proof HSG 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX Wide can be mounted from 11 ½ – 21’ to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX W: 30’ × 11’ @ 21’
Operating termperature: -22-140F

.......more details

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 10′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

R-600 Order Form Catalogue Installation Instructions

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

OPEN-CLOSE-STOP Push Button
Stainless Steel Enclosure
Buttons aligned vertically
Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”

K41-0241-000

LiftMaster Transformer for IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

E/1929/201

Automatic Systems Limit Switch Assembly

Used on the BL229 gate op.

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

MODKIT027 for field install simply plugs into the control board
Controls several auxiliary devices such as Strobe horn fan lights etc
Works with BOARD060
Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.

71-B1PH-1

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for SL585U/SL595U

This is a replacement Internal Brake Solenoid (120/240V SL585U/SL595U). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators.

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

K003-KEY

Replacement Key for 3BXLT Key #3

Replacement key only for key #K003

WHITING-ST

Whiting Strap Mounted Inside Door Option

This is an add-on option when ordering a Whiting door

5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

TDC1222-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #41 chain pack (TDC41-10) ***Actual length 131"***

Double Angle Rails for doors up to 8'6" high
Includes #41 chain pack

400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
Replacement arm for hydraulic Swing Gate Operator 10420112.5
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
Dimensions: 40.5 x 3.35 x 3.35

400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

400 CBAC EG Long Arm with positive stops
For hydraulic Swing Gate Operator
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB

PUSH180

Manaras Contact Block NO XB4/XB5

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

Does not include bearing
Steel Zinc plated finish

0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

.......more details

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

Used on the BL229 gate op.

DC2000

LiftMaster Controller DC2000****Discontinued

DC2000 Controller with battery backup
BackUp Commercial Vehicular Gate Operator
12VDC - 30 Amps Max.
125 lbs. Max. pull @ CSW-200 Units
105 lbs. Max. pull @ SL-3000 Units

MOD021AA

Manaras Safepack 24V Control Circuit

This is an option when purchased with an operator

510.1010.00

Whiting Custom Color Premium Topcoat Paint Option

Option for Dry Freight Doors

OMH-6112-M-N1-RH

Manaras Opera-MH 1/2HP 120V 1Ph with Monitored Circuit Board N1 Eyes Right Hand

A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
14 cycles per hour 50 cycles per day
Included PHOTO 070 Nema 1 eyes
Includes mechanical brake

GALV-262-258-144-L

Torsion Spring .262 x 2-5/8" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

B680H

FAAC Barrier Gate System ** Price by Quote Only

CT755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Op with Carwash Mod Logic 5

Low profile trolley operator with brake included

R6000

Shaft Collar 1" with 2 Set Screws

Set Screws: 5/16 x 18

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
12" x 2.5" Mounting Face
Fasteners NOT Included
Carbon Steel Black Powder Coated

Installation Guide

2704.143_150

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 15" Long Galvanized

Torsion spring for cube trucks with small roll-up doors
Specs: .143 x 2-3/16" x 15" Long
For Curbside order part # 2705.143*150

OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

D-2-5

Keyed Disconnect Device 5ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

OTBH-6213-1-M-N1

Manaras Trolley Operator 3/4 HP 240V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

P-8866TC-OCS

Pulsar 6-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 6 doors
8 dipswitches 318 MHz

Programming instructions

3-4742

Serco Lip Assist Bar ** Price by Quote Only

For Serco loading docks

GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

41D0598-1

LiftMaster U Bracket Adaptor

Also known as: 062314 12D598-1 12D598 41D598-1
For use with various Chamberlain® Belt Drive and Chain Drive Garage Door Openers and square rail assemblies

DS200-MINI-STORE

Wayne Dalton Mini Storage Door ** Price by Quote Only

Mini Storage Door Made to Order

EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details