Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SL595105UL

LiftMaster Industrial Slide Gate OP. 1 HP 575V 3PH with Heater and LMRRUL

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® High starting torque continuous-duty motor.
OPERATOR DUTY RATING: 25 cycles per hour.
METAL FRAME: 7-gauge pre-galvanized steel.
WORM GEAR REDUCTION: 20:1 worm gear reducer.

.......more details

.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

111537.0001.S

Overhead Sprocket 38T 1/4P

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

Bottom seal sold separately

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5

346

Cable Clamps Galvanized 3/16" Sold per piece

Galvanized malleable cable clip

7001-18-CHARCOL

Commercial Side & Top Weather-Strip 18' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

345

Cable Clamps Galvanized 1/8" 100/pkg

Galvanized malleable cable clip

1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

Standard 1/2 hp motor
Same as 20-3033-1

60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

Wall bracket only
4-1/2" projection

60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

Anchors only. Set of 4

TRANSF037

Manaras Transformer 240/208-24VAC 40VA

Transformer 240-208V Primary 24VAC Secondary 40VA

5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

28-00290

Truck Door 1" Std Vert. Track and Angle Assbly Roadside (LH) 96.5" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
For door opening less than 90" high
Fits door sizes 72 - 90" high
Cross ref: T #49014-2 T #41034-2 & W #4045

.......more details

2B639

LiftMaster Speaker for EL25 (41B0639)

1B0639

20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

Replacement electric motor for VSL gate op.

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
Winding cone color: White

12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

Fits model LJ / LJH

3228.1

Whiting 2" Nylon Roller 3" Shaft Stainless Steel *** To Extent of Inventory

This is a Whiting original roller

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

Sold in cut lengths per foot.
Dual fin

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

EH5761-A19

Automatic Systems Round Arm Assembly BL27 14'-9 (4.5M)

French description: Ensemble Lisse Ronde 4.5m (14'-9")
For model BL27 gate operator

80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

Black Plastic Knob
Formerly 802103 G802103
For SW470 with GL or S3 Board

26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

Three button wall station Open/Close/Stop
NO contacts on the Open and Close buttons
NC contact on the Stop button
Stainless steel surface plate
Flush mount

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

CONTACTOR041

Reversing Contactor 1 Ph-9A-24VAC

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

Assembled by manufacturer

20001

Doorlec Brake Spring

Fits LJ/LJH

BRACKET003

Manaras Disconnect Lever Bracket MJ

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts

101475

Insert Bearing 1-1/4" Bore SB206-20

102079

Flange Plate PFL6Z PFL206

2 required per bearing # 101475

104255

Allstar Clip only for 8833TC

Clip only

CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

10-3209_GATE_BRKT

LiftMaster Gate Bracket

Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

28773A

Genie Idler Pulley for Belt Drive

Fits PMX500-I B/C Belt & Chain drive model
Front Pulley for belt channel applications only.
Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
Part Numbers: 28773 28773AS 28773S 38773A

PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

PBS3-GREEN

Replacement Button Only - Green

Replacement button for 02-403P

50027

Doorlec Maximum Run Timer with Base

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

Comes with 3/4" bushing and 2 1/4" spring pins

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

OPH-6232-CONT-L

Manaras Opera-H 1/2HP 208V 3Ph Contactor Left Hand

Installation Manual Sell Sheet

MM00011

Micanan Brake Solenoid Cover

MGH-6113-ECB-RH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation Manual Sell Sheet

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

CP-PU-DRV-HDC

Lynx Drive Pulley 7/8" x 8" 5L HDC

7/8" shaft
8" diameter

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** NLA No Replacement

Base mount

7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-MO

Residential Wood Grain Side & Top W/S Medium Oak 8' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

For door thickness 2"

OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

25-4002-5K

LiftMaster 1.6-2.5 Amp Overload Fuse

For models: SL585-100-53 SL595-100-53 SL575-100-53

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

29200

Doorlec Transformer 208V pr 120V sec 35VA

208V prImary 120V secondary 35VA

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

IG2-K10-50

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 50 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.