Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-HB-7523U-RH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

MK-00225

Micanan Transformer 110V-24V-100VA

SS-1-1/4-24

Solid Shaft 1-1/4" Keyed 24 ft Zinc ** To Extent of Inventory

Maximum length for a solid shaft is 24ft
Actual length is approx. 24'-1"

.375-3-3/4-RH-C

Torsion Spring .375 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 3-3/4" Length: 12 ft

H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

25-60100

Truck Door Fork Lift Plate

Steel Construction
Black E-coat finish
Allows use of fork lift to open door from truck bay or when loads shift against door
Cross Reference: T # 69131 W #1092
Dimensions: 18" long x 5.5" tall with 1.5" lip

MO00006

Micanan Gearhead Disconnect Spring

Dimensions: 0.92ID x 0.09G x 2.00"L

.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

Pocket size key fob
Low cost entry level compatible with HID Prox Readers.

BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
Outside dimensions: 16.75" L x 10.75" W x 6.55" H
Inside dimensions: 12.15" L x 8.375" W x 6.5" H
Sold per bin

MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

Track only- no chain or hardware

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

MP00106

Micanan Warning Light Red/Green Remote Mount Box

LB1012-14

Laminated Bumper Standard Black 12" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

Wand only
Requires CS101 (Carsense-101)

781

Fasteners Hex Head Bolt 3/8-16 x 3/4" 1000/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

CBA18B08

Cable Assembly 1/8" 7x19 114" Sold per Pair

Galvanized cable assembly for 8ft door (114" = 9'-6")
Aircraft cable made of 19 wires per strand and 7 strands per cable
Sold as a pair
Same as part number 458

PBTL-3-100

Key ONLY for PBTL-3 Z100 Sold per Key

Cut Key # Z100
Price for 1 key

OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

.234-1-3/4-RH-C

Torsion Spring .234 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 1-3/4" Length: 12 ft

1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

CBC18

Thimble 1/8" - 100 per pkg

26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

Wire size: .283
Inside diameter: 6"
Length: 12 ft

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

GH-321-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 230V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

102079

Flange Plate PFL6Z PFL206

2 required per bearing # 101475

CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

041-0037

LiftMaster Cover for 85503

Replacement Cover.
Compatible with LiftMaster® Models 85503 & 85503-267 DC Battery Backup Belt Drive WiFi® Garage Door Openers; featuring myQ® technology and Secure View™ Video Camera.

2238.096

Whiting Coldsaver Intermediate Panel 14-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

CPE

Erone Proximity Card Standard *** To Extent of Inventory

Hexadecimal number printed on each badge
8mm thick

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

IDEAL-QC250

Ideal Tin Dark Red QC-250 3' x 10' 30G ID8250

Sold per sheet comes rolled up.

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

COUNTER-SHUTTER

Counter Shutter Made to Order

Solid aluminum panels constructed of interlocking extruded aluminum slat sections.
Each slat is made of continuous 0050" (1.3mm) thick aluminum extrusion 1 1⁄2” (38mm) high by 3/8” (9.5mm) deep.
A perfect solution for service counters booths ticket windows and kiosks.
Made to Order item
Sizes vary in width from 3'-0" to 16'0" and in height from 2'0" to 10'0"
Never exceeds 100 sq/ft

.......more details