Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** NLA

Electric motor only

K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators

VBELT_5L290

Manaras VBelt 5L 26" - repl. by B26

Used on OMJ OMH
Type B belt

CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

Works on BCSI-HV 240 single phase

14211

Doorlec Solenoid-Brake Lever Upper

Fits model LJH

K001-KEY

Replacement Key for 3BXLT Key #1

Replacement key only for key #K001

G220-1

Heddolf 1-btn Genie Compatible Remote 9 or 12-Dip Switch 390 MHz

Genie compatible transmitter

MGH-6533-ECB-RH

Manaras 3/4 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

50324

Doorlec Drive Shaft Kit ETB-3

SPBAR001

NICE Bar Support Kit MBAR5

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

Low profile trolley operator with brake and slow speed modification installed
Comes with #48 roller chain

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

41D0233-3

LiftMaster End Panel WiFi Logic Board

37300

Decorative Pull Handle Fleur-De-Lys Sold per Pair

Cast steel
Black powder coated with smooth finish
No rotation pull handle only
Approx 7-1/2" overall length

CP-PW-NM-34

Lynx Pocket Wheel for HDC

IBT4

NICE Interface Module

Required for use of Oview on the new Gen 2 MBAR models
Same as IBT-4N

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

PANORAMIC-FV

Garex Ready to Install Door Special Order

Aluminum Full View door - Factory frame and rail colours are Anodized White and Black - Custom colours can be factory painted - Multiple single pane or insulated glass styles are availavle such as clear tempered tinted frosted gluechip etc - Multiple hardware configurations are available to accomodate site requirements

MITIS-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Mitis design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MONTARVILLE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

TILLY-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Tilly design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

NEW-HAMP-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

VERMONT-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panels are spaced to not allow for decorative handles - Decorative hinges can be used - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

GX-175-A-R16

Garex Ready to Install Door Special Order

R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

URBAN-MR-R12

Garex Ready to Install Door Special Order

R12 Insulation - Narrow multi rib pattern - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

URBAN-R16

Garex Ready to Install Door Special Order

R16 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

871-ZAP

Zap Interface Expansion Module

A plug-in module with the option for additional expansion room for inputting external control devices.
Open Stop Close Common and Cycle input terminals are all provided
A 24VDC output terminal is provided.
If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
Requires 14-20 AWG wiring and plug-in mounting.
Comes with a six position dual direction plug that slides in.

.......more details

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

CA-151-312

Continuous Angle 1-1/2" x 3-1/2" x 151.5" L Sold per Piece *** NLA

12-ga angle

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

HA-3001

Hose Anchor for Treadle Hose

Made of cast iron

106141

Marantec Shaft Adapter

XBA3/U

NICE MBAR Replacement Logic Board

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

Reinforcement bar 3"

MV00482

Micanan Banner Intrinsically Safe Reflective Photocell Kit w/Bracket & Reflector (0-25ft. Range)

Kit icludes the bracket (MV280) and reflector (MV279)
Model Q45AD9LV
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P

.......more details

12-4164

Flange Mount Bearing Self-Aligning

Works with SL575 SL580 SL585 SW470.SW470 gate operator
Same as K12-4164 124164

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

12-ga angle

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 6.5ft - 11.5ft
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"
2 NO contacts and 1 NC (stop)
Nema 3R 4 12

3BX

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

K77-19130

LiftMaster Hardware Kit LA400 LA412

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

41D4509

LiftMaster Motor Kit ATS211

Also known as: K75-16424 41D4509 123D0155 123D155

K94-37871

LiftMaster Reset Switch and Harness SL595

For model SL595 slide gate operators

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

Fits OPRSXH75015BR GCL-H

2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

This isneeded to change over to their current motor

P-0129/RH

Autogate Retro Bracket Right Handed System

This is needed to change over to their current motor

M-0319

Autogate Groschopp Inline Motor 24V

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

MV00210

Micanan Banner Reflector 3"

Compatible with Banner #MV-00300 reflective photocell

MQ00008

Micanan Set Screw 5/16"-18 x 5/16" Long

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-8-ANODIZED

Commercial Side & Top Weather-Strip 8' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-7-D/TAN

Commercial Side & Top Weather-Strip 7' Long - Desert Tan 7001-DT

Desert tan galvanized steel with desert tan dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

For 2" thick door

K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

Steel construction
Plain finish
Whiting original

K30-205-E

LiftMaster Boot Red

Also known as: 30-205-E 30205E
Replacement button cover for 02-406 station

ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

SHAFT120

Manaras Input Shaft for OSHW

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

Compatible with LiftMaster® Model SW490GL Swing Gate Operators
Also known as: 20-1100-1T 2011001T G2011001T

HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

Heavy Duty 14 gauge offset hinge #1/2
Powdercoated Grey

60-2730

AB 42GRU-9002 Nema 4 Retro-Reflective Photocell Exterior *** Obsolete

Voltage: 110VAC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

Original Richards-Wilcox part

7-2239

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 5" Shaft Length Super 3 *** Call for Availability

Original Richards-Wilcox part
Roller diameter is 3" good for a 3-1/4" track
14 Ball

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

10W8

Resistor 10W 8K OHM

SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

140g

TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

RS2910B

Roller 2" Steel 9" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 8.41" Overall Length: 9.46"
Head and Stem Finish: Bare
Shoulder: Bulged stem
Rating: 15000 cycles of a 12' door
Load: 75LB

.......more details

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details