Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LEVER091

Manaras Open Limit Actuator

TSTRIP001

Manaras 12-Pole Terminal Strip

CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable

BCSI-PM27

Pivin Drapeau Sprocket & Bearing Assy BCSI Gate Operator ** Price by Quote Only

K10-34758-2

LiftMaster Battery Tray CSL24U

For use with CSL24U
Also known as: K75-34986-2

D525-54-HL-125

Cable Drum High Lift 54" 1-1/4" Bore Torque Force Pair

Maximum hi-lift: 54"
Capacity: 500 lbs per drum
Max. cable size: 3/16"
Cable length: Floor to shaft center 66" minus amount of Hi-Lift
Cross reference: DNS 54-125 OMI 54HL-125 M134-1375-125

O01R1110

AirLift Op. Original 10ft Complete w/hardware

50-LW1000BLK

Loop Wire Black 1000ft 18AWG

K75-30737

LiftMaster Disconnect Kit for GH

Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
Compatible with LiftMaster® Model GH Commercial Door Operators.

1104-18FT-GREY

Residential Side & Top PVC Weather-Strip with cap 18' Long - Grey (G)

Grey rigid vinyl retainer with Grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

K87-E-118

LiftMaster E-Ring Idler Shaft

Also known as: 87E118 87-E-118 G87E118
Commonly used with LiftMaster® SL595 Series; and various Commercial Slide Gate Operators

169027

Euro Side Hinge (25234) Zinc Plated

Steel Zinc plated
Thickness: 0.098"
Pin: 0.275"
Mounting holes 0.275"
Use with Euro center hinge #169026

HARNESS099

Manaras Opera ECB070 12 Pin Conn Wiring Harness

HYBRID-BLK-20

Residential Side & Top PVC/Aluminum W/S with cap 20' Long (241") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-10

Residential Side & Top PVC/Aluminum W/S with cap 10' Long (121") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-12

Residential Side & Top PVC/Aluminum W/S with cap 12' Long (145") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-9

Residential Side & Top PVC Weather-Strip with cap 9' Long (109") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-7

Residential Side & Top PVC Weather-Strip with cap 7' Long (85") - White

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

SEL2641R433-C4P

Erone 4-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Wireless System Chart

71-17148

LiftMaster Fuse Link Kit FDC

Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions

MA0137

LiftMaster Shear Pin #7 Mega Arm

041-0042

LiftMaster Wiring Harness Camera

Replacement wiring harness kit compatible with 85503 & 85503-267

K77-39428

LiftMaster Replacement Cover CSW24UL

Cantilevered cover
Includes labels keys cam-lock assembly
Sliding-latch door for reset switch
Protects internal gate operator components from exterior tampering weather damage

540.1000.00

Whiting Cold Saver Premium Topcoat Paint Option White

Option for Cold Saver Doors

SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

Cones for 6" ID Right Hand Wound spring wire
Not universal thread

SPR50B42X114

Sprocket 50B42 1-1/4" shaft 1/4" KW

42 tooth sprocket for #50 chain

10-10930

LiftMaster External Disconnect Bracket

Also known as: 10-7006 G107006 107006 1010930

K20-1050C-2PSF

LiftMaster Electric Motor 1/2 HP 115/30V 1PH CF

Replacement electric motor for fire door op

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

SPR410B18X11/4

Sprocket 410B18 x 1-1/4" Bore 1/4" KW 2S 5/16-18

E/1929/073

Automatic Systems Round Arm Ass'y 19'-8" (BL229)

Used on the BL229 gate op.

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

1224-1-5/8"-BLK

Elton Commercial Window for Flush Doors 1-5/8" thick 1224 Black Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing C16-32F
EBF6" offset USA Style
1" ID

19-40HL-NP

Half (Offset) Link #40 Nickel Plated

For #40 chain

ALUM-322

Aluminum 24" x 100' Spool Red # 322

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 322
Reverse side is #431 Bright White

Colour chart

MOUNTSHAFT018C

Manaras Limit Shaft Kit MGH Pre-2011 up to 1.5HP

For MGH pre-2011 up to 1.5 HP

GH-321-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P Contactor Model (Hard Wired)

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

MA020D

LiftMaster Door Kit Mega Arm Tower

SPR50B36X114

Sprocket 50B36 1-1/4" shaft 1/4" KW

36 tooth sprocket for #50 chain
Does not have any set screws

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.

CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

Complete brake kit with solenoid

CB14B0500-KOR

Cable 1/4" 7x19 500' Galvanized Supreme

Galvanized Cable 1/4" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Q410

LiftMaster Surge Protector K70-51060

Most commonly used with LiftMaster® SL3000 & CSW200 Models.

2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

MF00048

Micanan Round Head Slotted Bolt 1/4-20UNCx1-1/4" Full Thread

Used on various Micanan operators
2 required per operator

MG00006

Micanan Hex Nut 1/4-20UNC

3 required per operator

MG00012

Micanan Ribbed Hex Nut 5/16-18UNC

MM00082

Micanan Solenoid Support Bracket (MSI0085)

MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).
Adjustable spreader bar assembly included.

.......more details

27091A

Genie Limit Worm Gear for PMX500

Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
Works With Genie Models PMX 500-IC/B IC250/B

WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

PremiumPlate Roll-up door offers an alternative to plywood.
Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
5 rows of hinges.
Patented roller-change hinge design.

.......more details

MA020

LiftMaster Mega Arm Replacement Cover

MA-020 is a Mega Arm Replacement Cover.
Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY

OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

Overhead compatible full-size transmitter

CP-SH-58-1038-LS

Lynx Limit Shaft Only

5/8" x 10-3/8"
Used on most of Lynx operators

K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/460V 3P L5

This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators

K001-KEY

Replacement Key for 3BXLT Key #1

Replacement key only for key #K001

14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

MGH-6533-ECB-RH

Manaras 3/4 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

Low profile trolley operator with brake and slow speed modification installed
Comes with #48 roller chain

CP-PW-NM-34

Lynx Pocket Wheel for HDC

IBT4

NICE Interface Module

Required for use of Oview on the new Gen 2 MBAR models
Same as IBT-4N

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

MITIS-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Mitis design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MONTARVILLE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

GX-175-A-R16

Garex Ready to Install Door Special Order

R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

2807.187*300

Whiting .187 x 2-3/16 x 30" Curbside with Cones

871-ZAP

Zap Interface Expansion Module

A plug-in module with the option for additional expansion room for inputting external control devices.
Open Stop Close Common and Cycle input terminals are all provided
A 24VDC output terminal is provided.
If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
Requires 14-20 AWG wiring and plug-in mounting.
Comes with a six position dual direction plug that slides in.

.......more details

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

CA-151-312

Continuous Angle 1-1/2" x 3-1/2" x 151.5" L Sold per Piece *** NLA

12-ga angle

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

HA-3001

Hose Anchor for Treadle Hose

Made of cast iron

CABLE-NR-14-GALV

Cable No Roll 1/4" 19x7 Galvanized 500ft

19X7 rotation-resistant wire rope.

106141

Marantec Shaft Adapter

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

Reinforcement bar 3"

M-0131

Autogate Proximity (Limit) Switch

M-0133

Autogate Proximity Magnets

.25W8.2

Resistor 1/4 W 8.2K OHM

Dimensions (W X H X L) 6 X 15 X 3 CM

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

12-ga angle

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

85503-267

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera w/extra remote (893MAX) and keypad (877MAX)

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

Installation manual Manuel d'installation Sell sheet Receiver Logic Board Conversion List

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

41D8260

LiftMaster Cover 8355W

A one piece LiftMaster® "Silver" Replacement Cover.
For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers

K75-19978-R

LiftMaster Frame Plate Kit Right Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999