Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
50060

Doorlec Explosion-Proof Pneumatic Edge Kit

  • Kit includes explosion-proof air switch air hose plugs coil cord & fittings
  • Door size needs to be specified when ordering
MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

RS2910B

Roller 2" Steel 9" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 8.41" Overall Length: 9.46"
  • Head and Stem Finish: Bare
  • Shoulder: Bulged stem
  • Rating: 15000 cycles of a 12' door
  • Load: 75LB
    • .......more details
SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

  • Polymer gate roller with bracket for 4-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
MD00077

Roller Chain #40 Sold by the Foot

REDUCER030

Manaras Reducer CC63-40D Frame 56

328-729

Lip Shock Absorber Dock Leveler

HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

SPR41B44-1

Sprocket 41B44-1" shaft

K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

  • replacement black button but for rotating 8 position selector for 8L5-OCS
K72-33889

LiftMaster Clutch Shaft Kit

  • Clutch Shaft Kit for MJ Jackshaft Operators
  • Complete with: Clutch Plate Clutch Shaft Bearing Sprocket 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
  • Same as 308117101K 310115111 K7212589 K72-12589 71116121J
120BH

12" Heavy Brush Insert 6ft Long

  • Polypropylene bristles
OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

  • For door thickness 2"
2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

MK01428

Micanan Digital Countdown Timer

  • DC-Digital
DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

  • Fraba DW3S-300 air switch 10008797-2
  • Normally Open Contact (NOC)
  • Screw Type Connector
  • Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
  • Housing: ABS Switch: PA6V0 Nema4
  • Normally Closed Contact achieved by adjusting the sensitivity screw
    • .......more details
Operating Instructions
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

  • Replacement board only for USVD-4X
GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

L-14-40-0-M

Cable Tie Standard 40 LB Black 14" Nylon 1000/pkg

  • Ultraviolet Resistant
  • Length: 14.50" / Width: .140" / Thickness: .058" / Diameter: 4.00"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
    • .......more details
SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

INTERFACE001

Manaras Interface module Compatible w/PHOTO062

  • Enables the connection of monitored photoelectric cells to a Board or Electromechanical control without monitoring function
BCSI-HV-100-53

Industrial Slide Gate Operator Variable Speed 1 HP 600V 3 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
MA011

LiftMaster Magnet

  • Mega Arm Steel Magnet Assembly for Cam Arm
MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

K76-34697

LiftMaster APS Encoder 24V

  • For use with various LiftMaster® Commercial Slide and Overhead Gate Operators
K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

  • For operators with W or C Modification
10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

  • Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
  • Has a variety of mounting hole patterns compatible with many OEM manufactures
  • For use with J H DJ DH
  • May be welded
3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
3BXL
41D9276

LiftMaster End Panel Logic Board

  • 041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
  • Compatible with WLED model
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
31117

Doorlec Sprocket 41B12-1" Bore. KW/SS

F520-3.15A

Fuse 5 x 20mm 3.15A 250V Fast Acting 5/Pkg

  • 5 x 20mm miniature fast acting glass fuse
  • Rated voltage: 125V/250V
  • Rated current:3.15A
  • ROHS compliant
  • 5 per package ( Clamshell)
SHAFT036

Manaras Limit Shaft 5/8"-18x12

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

  • Same as #2-30-1
MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
MP00128

Micanan Up-Charge Track and #41 Chain for 10' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
V7001-BLACK

Replacement Vinyl Only for 7001-Black 200ft Roll

  • Sold in 200 ft rolls only
3500

Whiting Beverage Align Roller 1" Screw Type

  • A Whiting original
MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • Non-routed
  • .75" thick 7 ply exterior grade medium density plywood
  • Painted white
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
MB-03104

Micanan Electric Motor Only 1 HP 230/460V 3PH C-Flange TEFC 56C

  • For models GT GH GHC GSD
AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

  • Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
  • Tubular key with 2 keys
  • 60 Combinations Available
  • Spring Return Type
  • Recommended for multiple dwellings
  • Contact ratings: 4 A 125V AC 2A 250V AC
    • .......more details
MK-00034

Micanan Overload Reset 1-Phase 5 Amps

C-334-114-INSTAL

Cones 3-3/4" Factory Installed (Pair) 1-1/4" bore

  • For do-it-yourself installation use part no. SF375-114
.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
K1D7078

LiftMaster EMI Board

  • This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.375-334-L-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.363-514-R-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-514-INSTALLED
.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.343-258-L-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.331-6-L-C

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-334-R-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-514-L-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.312-258-R-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.306-258-L-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-514-R-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.295-2-L-C

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.295-2-R-C

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-334-R-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.262-334-L-C

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.262-258-L-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-134-R-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-258-L-C

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.250-134-L-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-258-R-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.243-2-R-C

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-2-L-C

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-L-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-134-R-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-L-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-134-R-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED