Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

99554NYHNG

Nylon Hinge Black #4 *** To extent of inventory

Equivalent to 14-ga in strength.

MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** NLA repl by new style

Commercial / Industrial transmitter

APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Availble

APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

19-5810

LiftMaster Trolley Chain Pack #48 for 10ft Door

Chain pack only

370-3343

Stanley Magnet Assembly for Quiet Glide

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

OSH-6113-CONT

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H751L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by the RBH751-LH

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

23-34815

LiftMaster Stop / Reset Switch

Rocker switch 1A 12VDC

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

DR-312

Linear 1-Channel Delta3 Receiver 312 MHz - DISCONTINUED

312 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Programming Instructions

26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

26-94625

Truck Door Top Panel (15" x 98") for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

7001-12-CREAM

Commercial Side & Top Weather-Strip 12' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-10-CREAM

Commercial Side & Top Weather-Strip 10' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-18-SANDSTN

Commercial Side & Top Weather-Strip 18' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

7001-12-SANDSTN

Commercial Side & Top Weather-Strip 12' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

Assembly includes: End panel Logic board and Light socket
For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
Also known as 41AB075-2 41AC075-2 041AC075-2A

MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

Brake assembly does NOT include the solenoid

9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

Looped on one end the other is raw (no stops)
Used to wrap around the body of an extension spring to contain the wire should the spring break.

9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

Cable assembly for extension spring door - looped one one end the other is raw (no stops)

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote

Programming Instructions

RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

Replacement reflector for the CPS-RPEN4 photo-eyes

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

27-20100

Truck Door T-Style Spring Assembly 60" Long

Wire thickness: .24"
Inside diameter: 1.75"
Includes bolt plug and winding plug wound onto spring for stronger design
Cross reference: T#51042 W#2701

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

20 AWG
Ideal for wiring CPS-RPEN4 photocells

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

Torsion spring wire only
.171 wire size

MD-00007

Sprocket 41B12 1" Bore 1/4" Keyway 2 SS 5/16"

MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

8-pin

DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

Includes side seal upgrade

22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

36190T.S

Genie Control Board 3-Terminal

Fits the Legacy overhead model and the PMX500 model and is compatible with:
696CD/B
Genie PMX/B Model PMX500-IC/B
Model 496CD/B
GCG & GCG-L Series e.g. GCG350 GCG350L
PCG & PCG-L Series e.g. PCG400 PCG450L

.......more details

91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

Fits SL595

08-11012

LiftMaster Bevel Gear 5/8" ID

Fits LiftMaster GH operator

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

Reinforcement bar 2-1/4"

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

WG-305

Devanco White Lithium Grease

Provides long lasting lubrication and protection against rust and corrosion
Ideal for metal to metal applications
Sprays on thick providing a long-lasting protective coating that won't run off

Material Safety Data Sheet Fiche Signalétique

029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Painted white
Stainless steel package

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

K75-18618

LiftMaster Disconnect Kit for Grey SL595

Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
Works with SL590 and SL595 Gate operators that are painted Grey

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

Same as MK-01179

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

AC7

Felco C7 Cable Cutter 3/16" Capacity

Tool length: 8"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 7mm / 0.28in

.......more details

Data sheet

ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

For model PRO-APT

SHAFT023

Manaras Intermediate Shaft for MJ operator

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

Works with Chamberlain (LiftMaster) Garage Door Openers
Easily connects with two wires to the photocell terminals of the opener
The Laser light turns on as you drive into the garage
Simply Adjust the light to a specific spot on the dash

Installation Manual Manuel d'Installation

86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
Replaces existing control panel
Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
Motion-activated opener light control
Adjustable light timer option
Lock feature

.......more details

Installation Manual Manuel d'Installation Sell Sheet

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)

.......more details

Programming Instructions

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

Three tabs for universal mounting
One "NO" relay
Compatible with 10 dip- swith 300 MHz Multi-code transmitters
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

855LM

LiftMaster HomeLink Repeater Kit

This kit contains a repeater and a transmitter
The HomeLink repeater is only compatible with HomeLink equipped vehicles

Programming Instructions

RELAY022

Manaras Socket Base for TIMER031

8 pin base

L0172-092

Low Temperature Grease 10oz Tube

Lubriplate multi-purpose low temperature grease.
Excellent cold operating characteristics

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details