Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

  • Serpentine belt 27" long
  • Fits Genie GCL-T Trolley operator
  • Some Overhead drawbar models: JST RSX RMX
K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement.

  • Replacement Logic Board for LiftMaster Gate Operators
  • Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
  • Fits Swing operators SW420 SW470 SW490
355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up to 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
Programming InstructionsInstructions de programmation
ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
    • .......more details
Installation ManualWorksheetSell Sheet
.283_6"-LH

Torsion Spring .283 x 6" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 6"
  • Length: 12 ft
.468_3-3/4"-LH

Torsion Spring .468 x 3-3/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.306_2"-LH

Torsion Spring .306 x 2" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2"
  • Length: 12 ft
.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.273_1-3/4"-LH

Torsion Spring .273 x 1-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmation
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
Instruction Manual
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
Instruction Manual
41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: circuit board end panel and light socket
  • For belt drive units
  • Fits 2280 2580 WD822K(s) WD922K WD912K(S)
  • Also known as 41A5483-4 41A5483-4B
41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

  • For models: ATS211X ATS2113X
  • For older model ATS211 use part number 41C4470
Installation ManualManuel d'Installation
41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

  • Gear and sprocket assembly for belt drive units after 2002.
  • Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.
Installation ManualManuel d'Installation
23-2017

LiftMaster Limit Switch SPDT

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

4A1344

LiftMaster Light Socket Plastic (41C279)

03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
24-24-6

Small Relay 24VAC 11-Pin 3 PDT

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

  • Commercial Open/Stop/Close receiver for one door.
  • If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
  • It is easy to set with its learn feature (no coding switch).
  • This receiver can accept up to 8 different operational codes.
  • Manufacturer's model number: 190-110554
  • Dimensions: 6 1/4" x 3 5/8" x 1 3/4"
    • .......more details
Programming Instructions
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

  • This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833T (190-108817)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
T-931

FL-Allstar 1-btn Transmitter 108787-311 MHz

  • This one channel transmitter controls one residential door(open-close with the same button).
  • It has a nine switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 9931T (190-108787)
  • Dimensions: 4 5/8'' x 2 3/8'' x 1 1/4''
Programming Instructions
CAM004

Manaras Limit Cam

  • Limit cam for Mountshaft009A 018C 018D
  • 2 cam's required per shaft
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

  • For units from 1993- present equipped with safety sensors
  • Same as 41A5266-3
  • For use with with 41A5281
  • New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
  • The new brackets (041-0155) are not backwards compatible
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.295_5-1/4"-RH

Torsion Spring .295 x 5-1/4" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

  • Double limit switch DP DT
  • For LiftMaster and Micanan operators
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
11801

Doorlec Oilite Cam

  • Fits 5/8" shaft fine thread.
  • Grooved 5/8" - 24 x 3/8"
  • Requires 2 per cam shaft
12561

Doorlec Brake Drum 4" Diameter

  • Fits all Doorlec operators equipped with brake shoes
12563

Doorlec Upper Brake Shoe - Right

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 2 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
MJ00003

Micanan Brake Drum ** To extent of inventory

  • Fits all Micanan commercial operators equipped with a solenoid brake
  • Available only in complete kit # MJ00013
CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) ***No Longer Available

  • Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
  • Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
  • Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
  • One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
  • Programs in 2 easy steps
  • Compatible with LiftMaster® Security+2.0™ garage door openers
    • .......more details
877MAX Manual
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

  • Open/Close mini remote for 1 door
  • Comes with LED battery life indicator
  • Mini 12V battery included
  • Key chain holder included
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
    • .......more details
Programming Instructions
9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

  • Open/Close mini remote for 1 door
  • Compatible with Allstar and MVP receivers
  • Tab for key ring
  • Power: 12-volt battery
  • Codes: 19683 (set by nine trinary dipswitches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Key ring not supplied
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 (set by dip switches)
    • .......more details
Programming Instructions
HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

220499

Linear Drive Sprocket - Belt (HBT)

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

RV-112

1-1/2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

  • Black - for door thickness of 1-5/8"
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

  • For 2" thick doors.
1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-14-BROWN

Commercial Side & Top Weather-Strip 14' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.