Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MX00140-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - New Model ** DISCONTINUED

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

  • ID: 0.40625’’
  • OD: 0.8125’’
  • THK: 0.066’’
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation ManualSell Sheet
97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

  • For use on Easy Operating System (EOS) units 4500E 4700E and M50.
  • Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
  • The marantec old model number was 78914 it is now 97798.
Programming Instructions
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
MOTOR274-WIRED

Manaras Electric Motor 3/4HP 575V 3PH Wired

  • Motor and brake come wired •This item is compatible with BRAKE011
3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

  • Heater used in BG type gate operators
Installation Manual
SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

  • The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
  • Each pail contains 72 towles
  • 6 pails per case
.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

  • Full length thread
  • Max torque = 6
786

Fasteners Hex Nut 1/4-20 1000/Box

765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

  • Serrated flange face to provide locking
778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 5
23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
K75-18620

LiftMaster Limit Box Kit for SL595 ** Discontinued

  • Kit contains: Limit shaft Limit switch box Lid for cover Panel Adjustment plate Mounting bracket Limit shaft bearing Compression spring Spacer Nut Terminal box Hall effect kit Tinnerman nut double and e-ring
41A5389-1E

LiftMaster Receiver Logic Board

  • For low profile screw drive models with one light
  • Fits models 2110 2220
Replacement Instructions
MV00292

Micanan Banner Photocell with Reflector

79-11378

LiftMaster Circuit Board Assembly for LGJ **NLA - Discontinued 2015

  • Same as part number K79-13743
SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

SSZP5-6

Solid Shaft 1" Keyed Zinc Plated 5'-6"

SSZP6-6

Solid Shaft 1" Keyed Zinc Plated 6'-6" ** to extent of inventory

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
1116633901.S

Overhead 1-btn Transmitter 390 MHz

  • Replaces the 1091303901.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 390 MHz frequency garage door openers that were manufactured before 1996.
  • This was a common remote on the 556C
    • .......more details
Programming InstructionsInstructions de programmation
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H501L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Right Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

  • Include: Track Balancer Standard Hardware and side top & bottom seals.
  • Replacement for Utility Trailer s/n CS39865
17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

  • Fits model H operator with Logic 5
  • 5/8" ID x 2" OD
K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
K001C8103-1

LiftMaster L5 Antenna

42-31246

LiftMaster Terminal Block 20A 600V

  • 3-position
K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

  • For Logic 5 commercial operators
  • Same as K001D8396-1
  • 014D1276E
23-34815

LiftMaster Stop / Reset Switch

  • Rocker switch 1A 12VDC
7001-16-CREAM

Commercial Side & Top Weather-Strip 16' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-10-SANDSTN

Commercial Side & Top Weather-Strip 10' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
V1104-GREY

Replacement Vinyl Only for 1104-Grey 200ft Roll

  • Sold in 200 ft rolls only
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

1104-18FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 18' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-14FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 14' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
110995

Allstar Classic 3-Btn Transmitter 318 MHz *** Discontinued

  • Open/Close remote for 1 door
  • Quick code platform
  • Compatible with both MVP and traditional Allstar receivers
  • Replacement for 9921T 9931T 8822T 8832T 8833T 9921MT 9931MT 9921TK 9931TK 8832TK and 9931TK6
Programming Instructions
466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

  • Up to 100 000 individual codes
  • Mounts to wall or gooseneck post
  • Incl. 6-volt alkaline battery
  • Illuminated stainless steel faceplate and keypad
  • Tamper-resistant case and "low battery" indicator
  • Requires 412HMC receiver
    • .......more details
Installation ManualSell Sheet
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws 1/4-28
  • Square 4 bolt
MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

  • 8-pin
EL25S

LiftMaster Telephone Entry System Silver

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
65853

Marantec Programming Wire - Old ML to New M3

  • Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.
358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

  • Comes complete with #77W Lock
  • Actual replacement for Intercontinental-Winnipeg s/n 51617
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-1/2"
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has 5 relays
Instructions Manual
LOOPDETLM

LiftMaster plug-in loop detector

  • Plug-in Loop detector for CSW24V CSL24V AND LA500
  • Includes diagnostic and test feature
  • 12VDC/3mA power draw
  • For exit interrupt or shadow loop applications
  • Activates only when a vehicle passes over a loop
  • 8 sensitivity levels plus boost to ensure that vehicles are easily identified
    • .......more details
Installation Manual
42-31247

LiftMaster Terminal Block 20A 600V

  • 3-position
K74-31243

LiftMaster Kit SVC MOV

SOLID_SHAFT_10'

Solid Shaft 1" Keyed 10 ft Galvanized

  • Actual length is approx. 10'-1"
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
Installation Manual
K75-12858

LiftMaster Clutch Kit for SL595

  • Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway
Replacement Instructions
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

  • For door thickness: 1-1/4"
1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

  • For door thickness: 1-1/4"
1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

  • For door thickness: 1-1/4"
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
K74-G0589

LiftMaster Hall Effect Sensor

  • For SL595 gate operator
85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

  • For model PRO-APT
27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

  • Sold as a pair (1-left and 1-right)
  • 11-guage
  • Dimensions: 4-1/2" W x 11" H x 1-3/8" D
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED