Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

  • Double - Loop
  • 32" long 48" stretch 220 lb load
  • Springs sold individually
32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

  • Double - Loop
  • 32" long 48" stretch 80 lb load
  • Springs sold individually
25-42-170

Extension Spring 7' Door - 170 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-180

Extension Spring 7' Door - 180 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 118
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-70

Extension Spring 7' Door - 70 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 70 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-50

Extension Spring 7' Door - 50 lbs Red

  • Double - Loop
  • 25" long 42" stretch 50 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 105
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161
25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #15 T #70159
  • Box quantity: 50
Z9997

Hand Chain 25' for Manual Chain Hoists

  • Not SAE rated.
  • Designed for approx. 35 lbs
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
  • .......more details
H11G06

Hinge #6 x 11 gauge

  • 11 gauge #6 hinge - 0.79 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
RN1324

Roller 2" Nylon 4" stem 13 ball White Sold per Roller

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.71"
  • Box qty: 100 Box weight: 32.2 lbs (2-4-13 White Nylon)
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Hardened inner race
  • Includes fork
S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

HD3080

Step Lift Plate Curled

  • Step Plate/Lift Handle
23-10041

LiftMaster Limit Switch Commercial

  • Will work on LiftMaster and Micanan operators
25-10275

Truck Door Universal End Hinge Flush Mount

  • Steel construction Zinc plated finish
  • Eliminates routing of panels for easier installation.
  • Removable cover allows roller change without hinge removal
  • Includes: Hinge roller cover & kep nuts
  • Cross Reference: H-325716
K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
028-201

Blue Giant Photoswitch 10-30VDC 50CM Range 5M Cable SMP8500/5PG5 **Special Order

  • Light Source: Infrared (880 nm)
  • Control Feature: Sensitivity pot. and light/dark switch
  • Output Status: N.C/N.O
  • Housing: M18 x 1
PRO-HBH-7553U-L

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
2528.096

Whiting Dual-Spring Shaft 96" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer
28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 1" rollers
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
.262-2-5/8-RH-C

Torsion Spring .262 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2-5/8" Length: 12 ft
.192_1-3/4"-LH

Torsion Spring .192 x 1-3/4" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 1-3/4"
  • Length: 12 ft
ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

  • For use with 1016
TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
Q200

LiftMaster Chain Coupling Release K07-50215

  • For Liftmaster trolley operator HCT
CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
MK-00030

Micanan Transformer 115V-24V-40VA

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
  • .......more details
28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

  • Fits model LJH/W
H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
41A6348-3

LiftMaster Cover RJO

  • Same as 41A6348-1
510.5377.00

Whiting Side Seal Option for Dry Freight Door

  • A extra option when ordering a Dry Freight door
  • When purchased alone use part number 5377.115
.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
PHOTO-075

Manaras Non-Mon. Retro-Refl. Photo Cells Exterior 24V IP67 0.5-32' Range.

  • Non-Monitored reflective Photoelectric manufactured by Sick
MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

  • Flush mount
MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

  • PRO-H/HB operator parts
  • 2 required per operator
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

  • Track only- no chain or hardware
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
71-EB120H

LiftMaster External Brake Solenoid 120V with Cable

10W8

Resistor 10W 8K OHM

271723

Rolling Steel Slide Bolts for Bottom Bar D679

MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

  • For 1/3 HP and 1/2 HP operators only
91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

  • Fits SL595
CGH755-L5

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

EHJ-353-1

Doorlec Industrial Jackshaft Op. 1 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
  • .......more details
.218-2-5/8-RH-C

Torsion Spring .218 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2-5/8" Length: 12 ft
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
DISCONNECT001

Manaras Floor Level Disconnect Lever

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • .......more details
OPH-6114-M-N1-RH

Manaras Opera-H 1 HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
86-925

Gel Connectors Red 19-26 AWG 100/Pkg

  • Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
  • Quick one-step splicing – insert unstripped conductors and crimp
  • Use with solid copper single-conductor wire 19-26 AWG
  • Maximum insulated O.D. of .066 in. (1.68 mm)
  • Permanent connection- once crimped they cannot be reused
  • Use 12 or 3 ports as needed
  • .......more details
1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

  • Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
  • Can be replaced in-field
1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
9V

Battery 9V Alkaline Duracell Procell sold individually

BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

  • Sold as a pair (includes one left and one right hand)
  • Same as BB-5 LHR Reinforced
GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
.437_6"-LH

Torsion Spring .437 x 6" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
2200-938

Linear VBelt 28 4L Cogged

620-100991

Linear Heater Kit Assembly 460V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
PCBA-PLCD10

Dyna Hoist/Pulse Replacement LCD Assembly Pulse 500 Series

1224-2-LOUVER-W

Elton Garage Door Louver Powder Coat White 2" Thick Door

  • Powder coated white for durability
  • Screen keeps bugs out
  • The standard size for the Louvers is the Elton 1224 Window
OSHW-6533-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details