Devanco Canada - Get The Right Garage Door Opener‎ and Parts

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

41D7742-7

LiftMaster Travel Module

Fits models 8165 8355 & 8155W

CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

For use with sectional or rolling doors.
May be installed in areas exposed to rain or moisture
Rubberized for more durability
Will work on LiftMaster residential operators

Installation Manual Manuel d'Installation Sell Sheet

36179R

Genie Traveler Assembly for Screw Drive

Fits model 3060 L/M
Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

Installation manual Manuel d'installation Product guide Guide de produit

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

Reinforcement bar 2-1/4"

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

OMNI-EXB

LiftMaster Relay Module

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

41A7619-4

LiftMaster Cover for 8557

SHAFT034

Manaras Clutch (Input) Shaft for MJH

MJ INPUT SHAFT 5/8-24X12

029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

Manufactured to exact size fully assembled tracking and spring assembly included.
Price varies according to size

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

Three Button Master™ Visor Remote
This 3 button remote can be used with 3 Intellicode openers
Replaces all Intellicode Series I And Series ll remotes
Replaces 9 switch and 12 switch 390MHz Genie remotes
Works with all Genie model Gated Community Receivers
This remote will not work with 315MHz Canada 12 switches openers

.......more details

Programming Instructions Instructions de programmation

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Switch DPST-NO/NC Chassis Mount
Actuator Type: Side Rotary Adjustable Roller
Termination Style: Screw Terminal
Ingress Protection: IP66 - Dust Tight Water Resistant
Switch Function: On-Mom Off-Mom
Current Rating (Amps): 5.5A (AC) 2.8A (DC)

.......more details

Installation Manual

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

111010.0001

Overhead Door Serpentine VBelt 27"

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

45ACT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
AC Belt and Chain Drive models
Fits models LC500EVC HD420EVC PD622EVC
Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675

21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

2 strand 22 gauge tin dipped copper hook-up wire
Color coded White & White/black wires

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

1702LMC

LiftMaster Quick Release Lock

For all vault-type garages
For exterior manual operation
6ft industrial-strength connecting cable
Non-corrosive stainless steel faceplate and spur washer
Extension sleeve for doors up to 2" thick
Positive connection between cable and trolley release

.......more details

1702LMC Manual

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details

Instructions Manual Sell Sheet

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

.319_5-1/4"-LH

Torsion Spring .319 x 5-1/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 5-1/4"
Length: 12 ft

.468_3-3/4"-LH

Torsion Spring .468 x 3-3/4" x 12ft LH Blue/Orange

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-LH

Torsion Spring .319 x 3-3/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Programming instructions Instructions de programmation

71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

Interior mount brake kit for operation with chain hoist
Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.

Instruction Manual

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

144C54

LiftMaster Idler Belt Pulley

Wide idler belt drive pulley
For square rail assemblies

.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft

.421_5-1/4"-RH

Torsion Spring .421 x 5-1/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.262_3-3/4"-RH

Torsion Spring .262 x 3-3/4" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.234_2"-RH

Torsion Spring .234 x 2" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

Sprocket for #41 chain

41A5281

LiftMaster Extension Brackets for Snappy Sensors

Brackets used with Snappy Sensors 41A5034
For use with with 41A5266-1

MJ00001

Micanan Brake Shoe - Left **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

MJ00003

Micanan Brake Drum ** To extent of inventory

Fits all Micanan commercial operators equipped with a solenoid brake
Available only in complete kit # MJ00013

CP-SW-AT

Lynx Single Limit Switch

BK002

Residential Top Bracket Low Headroom Sold Individually

Bright zinc plated 10-gauge steel
3/8" roller offset

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

AP5

Linear MegaCode Wireless Access Controller 318 MHz

Ideal for gated communities parking facilities and industrial sites
Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
Supports up to six fully supervised safety edge transmitters
AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only

.......more details

Programming Instructions