Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RATCHET_BAR

Ratchet Bar for Holdown Assembly 8-8786 ** Quote Only

.205-3.5-10-RHW

Mini Storage Spring .205 x 3.5" x 10" long Right Hand

SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-2

Standard Riser Bracket for 6" Above Dock or Less 2"

  • Standard 2" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
MM00447

Micanan Idler Wheel PRO-APTC

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

  • Reinforcement bar 2-1/4"
  • 20G
LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1212-18

Laminated Bumper Standard Black 12" L x 18" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1212-12

Laminated Bumper Standard Black 12" L x 12" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB910-14

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
Drawing
LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010-8FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 8ft SSR Rail (1608LM) ***No Longer Available

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
AC636

Aluminium Threshold AC6 x 36" (3')

.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 300 lb load
MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

41A4371

LiftMaster Belt Cap Retainer

  • Same as 41C4371
MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

  • Powdercoated Grey
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 3-1/2" maximum
  • Good for use with 3" hardware
HINGE-911-PCG

Powdercoated Hinge #9 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #9 - 0.89 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-711-PCG

Powdercoated Hinge #7 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #7 - 0.87 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-211-PCG

Powdercoated Hinge #2 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #2 - 0.71 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

  • Used on PRO-GHC
  • 10 required per operator
MM00008

Micanan Frame GHC MSI0034

MH00004

Micanan Flange Bearing UCFL207-22 1-3/8" Bore

  • Used on PRO-GHC (BHC-80) for 2 3 5HP
  • 2 required per motor
MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
K74-18346

LiftMaster Limit Shaft Kit

  • Compatible with LiftMaster® Model GH 5HP Commercial Door Operators
PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • Roadside
  • For Curbside order part # 2807.139.130
K20-1075B-2TLP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L3 L4 TEFC

RCB-TIP

Roller Chain Break Replacement Tip Only *** NLA

  • Replacement tip only for RCB-2560
MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
MK-00646

Micanan 9" Coax Cable for On-Board Receiver

ME00037

Micanan Clutch Shaft Only for PRO-LH

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

  • Used on PRO-GHC
  • 4 required per operator
50615

Splash Proof Cover EHJ / HDC

Drawing
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

VWS-34-CHARCOAL

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Charcoal

  • Pan head
  • S point
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

  • Pan head
  • S point
VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** NLA - USE MEDIUM OAK

  • Pan head
VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
VWS-34-DARK-BRWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Commercial Brown

  • Pan head
  • S point
VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

  • Pan head
HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

  • Provides for center mount installation of a jackshaft operator
  • Operator output shaft is coupled in line with door shaft assembly
  • Couplings NOT supplied
  • NOTE: Reverse limit modification required
MOD060-14FT

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
MP-00002-230V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

OPH-6213-ECB-LH

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
27089A

Genie Washer

  • Drive shaft washer for PMX500
2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

39537R.S

Genie Control Board

  • Replaces any circuit board starting with 37028
  • Does not come with new housing
  • Compatible with models 1022 1024 1042 1026 2022 2024 2042 2026 and 2027
MGH-6214-ECB-RH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
5001-14-WHITE

Residential Side & Top Weather-Strip 14' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-12-WHITE

Residential Side & Top Weather-Strip 12' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-9-WHITE

Residential Side & Top Weather-Strip 9' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
26CW94521-CUT

Truck Door Intermediate Panel (11" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
PRO-HHD-5053U-RH

Micanan 1/2HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
MGH-6214-CONT-LH

Manaras 1 HP 240V 1P Jackshaft Contactor Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
HBSLUD

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Sold per Pair ** NLA

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
    • .......more details