Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

GALV-225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

2237.1

Whiting Coldsaver Intermediate Panel 13-1/2" x 93-3/4" *** Price by Quote Only

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

MD-00242

Sprocket 41B14 x 3/4"

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-331-334-144-L

Torsion Spring .331 x 3-3/4" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-L

Torsion Spring .262 x 3-3/4" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

2200-886

Linear Sprocket 50B20 1" Bore

9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

GALV-312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED
Galvanized

MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

Price by quote only

GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-363-334-144-R

Torsion Spring .363 x 3-3/4" x 12ft RH Galvanized Green/White

Wire size: .363
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-2-144-L

Torsion Spring .262 x 2" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

TRACK003

Manaras 1 Piece Galv Track 2x2x12'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

GAREX-PAINT-KAKI

Garex Touch-Up Paint Kaki

301012

Whiting C-4 Anti Lozenge Bracket Road Side ** Price by Quote Only

Q079

LiftMaster Trolley Body Kit K75-50137

For Liftmaster trolley operator HCT

CG-HOIST-SGLE-114

ControlGard Chain Hoist Single Compound 1-1/4" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

CG-HOIST-SINGLE-1

ControlGard Chain Hoist Single Compound 1" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

GDI-TML31

GDI Trolley Bracket Only

Add on feature for JDMG-LG op

GDI-TLG51

GDI Trolley Kit Add-On Feature

This is an add-on feature to the JDMG operator
Includes: Trolley brackets traveller idlers arms

333-042

Serco Spring (Latch Bar) ** Price by Quote Only

For Serco loading docks

4580-304-SLATE/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Slate Grey 458-22 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

4580-304-CHOC/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Chocolate Brown 458-19 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

CAMPLATE012

Manaras Cam Plate MTH/MTBH N1

GH-RSF

Gear Head Rolling Steel Hood Mounting Plate

1/4’’ steel plate painted with a black oxide finish

167212

Decorative Dummy Solid L-Handle Black Sold per piece

Zinc painted black powder coated with crinkle finish
No rotation
Blind mount

510.2996.05

Whiting Steel Roller Upgrade Option for 5 Panel DF Door

Upgrade option only - must accompany a door order

EHJ-321-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

SSZP13-6

Solid Shaft 1" Keyed Zinc Plated 13'-6" (162")

GH-321-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 230V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

O19R3000

AirLift Timer Macromatic with Socket

CG-4W-MON-BLK-RH

Miller Edge Clima-Guard 4-Wire Monitored Black Right Hand Outlet Sold by the Foot

Clima-Guard functions exactly like a pressure sensitive electric edge but with an added layer of protection.
The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier.
ClimaGuard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.
Electrical Configuration: Normally open
this edge comes with the channel

1104-10FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Claystone ** NOT AVAILABLE

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

041-0041

LiftMaster Camera with Decorative Cover

Fits model 87504

MOD112

Manaras Limit Shaft Speed-Up #48/#410 Chain

Sprockets and chain are replaced in order to accelerate the ops limit shaft to increase the accuracy of the limit system for sectional doors 8ft H or less
For field upgrades use MODKIT112

WHITING-PWCS

Whiting White Urethane Topcoat Option For ColdSaver Door Panel

This is an option when ordering a panel

GAREX-PVC-W-16

Residential Side & Top PVC Weather-Strip with cap 16' Long (193") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

K77-39428

LiftMaster Replacement Cover CSW24UL

Cantilevered cover
Includes labels keys cam-lock assembly
Sliding-latch door for reset switch
Protects internal gate operator components from exterior tampering weather damage

MA0137

LiftMaster Shear Pin #7 Mega Arm

41A6288

LiftMaster Work Light Hardware Kit

510.1184.00

Whiting Hold Open Device 1184 Light Duty

Upgrade option when buying a truck door aka Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.

25E10272

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

Steel construction Black E-coat finish
Stud plate for 2 stud
Cross Reference: W #2032

SHAFT104

Manaras Clutch (Input) Shaft for Opera H

E/1929/073

Automatic Systems Round Arm Ass'y 19'-8" (BL229)

Used on the BL229 gate op.

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

19-41HL-NP

Half (Offset) Link #41 Nickel Plated

For #41 chain

K94-32309

LiftMaster J2 Harness Assembly SL585 SL595

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

Complete brake kit with solenoid

3250

Deadbolt Diecast Case Lock Set w/2 Keys

Includes mounting hardware
Includes 2 regular keys (not Master keyed) Schlage keyway
For use on doors up to 2" thick

WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

PremiumPlate Roll-up door offers an alternative to plywood.
Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
5 rows of hinges.
Patented roller-change hinge design.

.......more details

CP-SH-58-1038-LS

Lynx Limit Shaft Only

5/8" x 10-3/8"
Used on most of Lynx operators

MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

Continuous duty C-flange ODP 60Hz

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

M-0131

Autogate Proximity (Limit) Switch

.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

.192 x 2-3/16 x 12'

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

CGH151L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1-1/2 HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except if a Mod is added
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2524 for #2376 balancer

BPPB17510

Garex Bottom PVC Moulding for 1 3/4" Door White U shaped 120"(10')

K20-1150C-2P

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph TEFC

Replacement electric motor for SL595-15021 and SL595-15011 models

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

SPGAP06400A

NICE Replacement Nylon Insert Kit

OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

CGH203L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details