Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

K23-34822

LiftMaster Open/Close Switch

For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

OPEN-CLOSE-STOP Push Button
Stainless Steel Enclosure
Buttons aligned vertically
Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

71-B1PH-1

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for SL585U/SL595U

This is a replacement Internal Brake Solenoid (120/240V SL585U/SL595U). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators.

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

K002-KEY

Replacement Key for 3BXLT Key #2

Replacement key only for key #K002

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

2110-236

Linear Shaft Output Assy HSLG Ups

OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

343

Cable Clamps Galvanized 3/8" Sold per piece

Galvanized malleable cable clip

400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

400 CBAC EG Long Arm with positive stops
For hydraulic Swing Gate Operator
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system

400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
Replacement arm for hydraulic Swing Gate Operator 10420112.5
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
Dimensions: 40.5 x 3.35 x 3.35

70600.000

Todco 2" Nylon Sealed WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB

OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

5M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M5BAR Barrier Gate

Bar assembly comes with:
XBA5
XBA13 -- RUBBER IMPACT PROTECTION STRIP
WA10 -- RED ADHESIVE REFLECTIVE STRIPS
SPGAP06400A – NYLON INSERT KIT
PD1614B0000

.......more details

N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-331-334-144-L

Torsion Spring .331 x 3-3/4" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-225-2-144-LH

Torsion Spring .225 x 2" x 12ft LH Galvanized Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft
Galvanized

OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

1 roadside horizontal track

GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

Galvanized Steel 16-ga (1.42mm) thick.

PUSH185

Manaras Contact Block NC XB5

11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

1 curbside horizontal track

50695

Doorlec Clutch & Pulley Assembly for EHJX

Includes shaft and bearings

59206

Todco Operator Bearing Shallow Header Roll Up Door

CAMPLATE019

Manaras Cam Plate Opera C-Box

210346

Skylink Tube Rail Belt 7ft Door

Replacement belt only

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

2200-886

Linear Sprocket 50B20 1" Bore

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

Optional 50 ft cable for use with the LZR-WIDESCAN

2100-1661

Linear Plate Torque Limiter VS/GSLG-A

2400-501

Linear Retaining Ring

2200-274

Linear Pillow Block Bearing 1"

MB-02104

Micanan Electric Motor Only 3/4HP 230/460V 3PH TEFC

C-Flange motor fits: GT GH GHC GSD

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

Designed for use on smaller and low-cycling industrial standard lift sectional doors.
It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
Maximum Door Height: 14' (4260 mm)
Back Room: door height + 3'11" (1175 mm)
Head Room For Tracks: 5" (127 mm) above the highest point of door travel

.......more details

SB257B2

NICE Filter Board w/T3.15A Fuse

MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

For use on Mega-Arm gate operator
Hardware kit MA033 NOT included
Red & White Retro-Reflectorized DOT Tape

15470

Doorlec Heater Strip 250 W 120 V

MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

Green (Open) Red (Mushroom Stop) Black (Close) push-button station

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

34202

Doorlec V-belt Pulley MA15 1-1/2" x 5/8" bore

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

Fits the older smaller boxes

25130

Doorlec Seal Oil CR6372

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

2100-765

Linear Shaft Pulley HSLG

CP-ENGAGE-SLIDE

Lynx Engaging Slide CDJ/MDJ

GALV-312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED
Galvanized

GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED
Galvanized

SHAFT117

Manaras Output Shaft for OSH

GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Galvanized White/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

Hardware kit for articulating arm models MA024 and MA034
Articulating arm hardware kit
Arm sold separately

R6000

Shaft Collar 1" with 2 Set Screws

Set Screws: 5/16 x 18

31107

Doorlec Sprocket 41B29 5/8" Bore

BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Operating temperature: -22 to 140F

.......more details