Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

  • Actual length is approx. 13'-1"
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML *** Price by Quote

  • Medium strength
  • This product cures fully in 24 hours and can be dissembled with hand tools.
  • This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
  • For metal to metal applications only
MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • .......more details
19-50106M

Chain # 50x106 (5-1/2') with Master Link

  • Also known as: 350120 199023
  • 106 links
PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

  • Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
  • All hardware is heavy-duty 12 ga material
  • Kits are configured for up to 2" door thickness. Other door thickness are available by request.
TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

  • Custom order to customer's needs
734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

  • Knurled shank
  • Max torque = 6
ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 506
  • Reverse side is #431 Bright White
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
  • .......more details
K74-34821

LiftMaster Reset Switch

  • Complete with reset button and mounting bracket
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
K75-34824

LiftMaster Chain Guard Kit

  • Complete with: Chain Guard Chain Guides and Retainers.
TS150

Wayne Dalton Thermospan 150 Steel Panel

  • Polyurethane insulation R-Value*=14.16
  • Max Width 26’2”
  • 1-3/8” Section Thickness
  • Patented roll-formed integral struts for rigidity
  • Stucco embossed exterior with pinstriping
K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
  • Chain can be adjusted for smaller doors
226-9313

Lithium AA 3.6V Battery

  • Used in various types of photo eyes
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
620-00993

Linear Heater Kit 230V

  • Heater kit for slide gate operator 230V
SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

  • Actual length is approx. 15'-6"
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
  • .......more details
104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

  • 1-piece rail
PG-K-R50

Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output

  • Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
  • Dimensions: 5.1" H x 2.8" L x 1.8" W
  • Weight (Em): 12.2 oz. (Em)
  • Weight (Rx): 11.2 oz. (Rx)
  • Aluminum enclosure
  • Mounting options: Wall floor post
  • .......more details
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
02-409

LiftMaster Key Switch 2-Position Nema 4/12

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
  • .......more details
RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
92803N6000

Truck Door .187 x 2.188 x 60 RHW

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

  • Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
  • Uses a high surface area aluminum heat emitter to eliminate the need for a fan
  • Provides low-radiation and high-convection heating in the enclosure
  • Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
  • Compatible with operators SL575 SL585 and SL595
C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF514U
BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

  • New model # 210131 no cover is needed
  • Metal Gear
AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

  • 24-240 VAC/DC
  • 35mA/125mA at 24VAC
  • 20mA/60mA at 110VAC
  • UL listed to UL325 standards
  • NEMA 3 4 12 Outdoor Rating
  • 40 ft. sensing distance
  • .......more details
.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
MK-318-2

Skylink 2-Button Keychain Transmitter

  • Easy to program.
  • Remove key fob from the car for enhanced security.
  • Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
  • 3V Lithium battery included.
  • FCC/IC approved.
  • Works Mastercraft made by Skylink
  • .......more details
EQ2712

SkyLink 3/4 HP Garage Door Opener with 1 Remote ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
103146

Marantec Synergy 380 Residential Opener 1.1 HPCS Head Only

  • Equipped with over 1 HPCS of pull and push force
  • Ideal opener for large and heavy applications like carriage house doors or large wind-loaded doors
  • 315MHz 2-channel remote control is included. Multi-bit code technology ensures interference free performance
  • Soft Start and Soft Stop functionality is reducing wear and tear on the operator system garage door and hardware
  • HomeLink compatible
  • Comes with 1.2 mm heavy-duty rail
  • .......more details
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
  • .......more details
7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-18-CHARCOL

Commercial Side & Top Weather-Strip 18' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
41A5021-5I

LiftMaster Electronic Circuit Board Assembly 390MHz *** NLA

  • 1 piece logic board with end panel
  • Used on 390Mhz Security+ AC belt drive operators made from 1997 to 2005.
  • Unit will have a red/orange learn button
  • Also know as 41A5021-D 41A5021-5E 41A5021-5F 41A5021-5G 41A5021-5H 041A5021-5I
7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-9-CHARCOAL

Commercial Side & Top Weather-Strip 9' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-8-CHARCOAL

Commercial Side & Top Weather-Strip 8' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

  • 3 channels 4-wire 3-terminal operator connection
  • Wire antenna included
  • Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • RF frequency: 318 MHz
  • .......more details
CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

  • Arms only for CP-CRG-NEW
CP-ARM-OLD

Lynx Auto Re-Connect Carriage Arms Only New Style 20-1/2" *** Discontinued

  • Arms only for CP-CRG-OLD
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • .......more details
9-24-1

Lynx BarLock Mounting Plate

39165R

Genie Series II Wall Console

  • Three-function wall console with backlit panel that is easy to locate in the dark.
  • Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
  • When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
  • Same as GBWCSL2-BX
7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

  • Bars are sold separately.
  • Hardware bag for doors 12' and under
MK00552

Micanan Capacitor for 233-284 MFD with Resistor ** Replaced by MK00542

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

  • 120 volt input power plugs into a standard outlet
  • 16VDC output 2.5 amps
0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

WOR

Linear Wiegand Output Receiver 318 MHz

  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
  • .......more details
12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pin coupler

  • Used on model LJH
MS001

LiftMaster MSL & MSW Control Board (K79-60142)

  • Replacement logic board for the Mega Slide and the Mega Swing gate operators.
  • Can be used in various Autogate Operators same as AG001
MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

  • The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
  • Maximum recommended duty cycle: 12 cycles per hour
  • Floor level disconnect
  • Adjustable friction clutch
  • Heavy-duty solenoid actuated brake
  • Easily field converted for right or left mounting
  • .......more details
CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

  • 19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
37313

Doorlec Relay Flat Pins 2 Pole 24V

21701

Doorlec Limit Switch Single ATM 15 AMP

CR2025

3V Lithium Button Cell

345

Cable Clamps Galvanized 1/8" 100/pkg

  • Galvanized malleable cable clip
37314

Doorlec Relay Mini 120V

  • For overrun pre-wired 25 Amp
GAREX-REPL-PANL

Garex Replacement Panel Special Order

  • Ordered to customer's exact requirements for size and color
  • Pls call for pricing
GAREX-READY

Garex Ready to Install Door Special Order

  • specify size color details when ordering
  • Please call for pricing
PBTL-3-102

Key ONLY for PBTL-3 Z102 Sold per Key

  • Cut Key # Z102
  • Price for 1 key
60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***To Extent of Inventory

  • For 9000 series photo switches
AKR-1

Linear Exterior Digital Keypad with Radio (ACP00747) *** NLA

  • Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
  • Built-in radio receiver
  • Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Accepts 480 entry codes 480 block code transmitters plus one fully supervised Model MGT safety edge transmitter
  • Two LED indicators show system status
  • .......more details
MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

MK00661

Micanan Varistor for Circuit Board 110V *** NLA Use MK00707

K72-13059

LiftMaster Output Shaft Kit APT

  • Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
K72-13058

LiftMaster Intermediate Shaft Kit APT

  • Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")
K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

  • Special order
74-4SG1A

Fuse Slow Blow Miniature Glass Fuse 2AG 1A 250V 5/Pkg

  • 4.5 x 15mm miniature slow-blow glass fuse
  • Rated voltage: 125V/250V
  • Rated current: 1.0A
  • RoHS compliant
  • 5 per package (clamshell)
6976.182.23.440

Whiting Single Spring Balancer Assembly .182 x 23" x 44" Shaft

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys
  • H=7" W=2-3/4" D=2-3/4"
5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.