Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SL332-ZP-COPPER

Zinc Plated Copper Sleeve 3/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP. Stops are not zinc plated

CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

344

Cable Clamps Galvanized 5/16" Sold per piece

Galvanized malleable cable clip

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

BL-08

Barlock Kit Complete for 8ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (49-1/2")

Assembly Manual

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

7001-9-CHARCOAL

Commercial Side & Top Weather-Strip 9' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

K180B0325-5

Rocker Switch / Circuit Breaker 250VAC

PBTL-3-102

Key ONLY for PBTL-3 Z102 Sold per Key

Cut Key # Z102
Price for 1 key

K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

K72-13057

LiftMaster Clutch Shaft Kit APT

Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

E/BLOP/128

Double Channel Loop Detector- factory installed on logic

SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

801-300-002-00

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz Pre-2016

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

71-EB120H

LiftMaster External Brake Solenoid 120V with Cable

71-EB208H

LiftMaster External Brake Solenoid 208V with Cable **to extend of inventory

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
Winding cone color: White

16094

Whiting Premium Plate Bottom Channel 96"

With end hole removed - replacement for serial # 165462

CB116A0250

Cable 1/16" 7x7 250' Galvanized

Galvanized cable 1/16" 7x7 250ft spool.

2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

TL-50ML-BLUE

Threadlocker Blue 50ML *** Price by Quote

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

CHI-SPECIAL

C.H.I. Special Order Door

Special order as per customer's requirements

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

21-7115-1

LiftMaster Transformer 115/230V 1Ph

MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

7119405

FAAC 400 Plug for End Cap

20001

Doorlec Brake Spring

Fits LJ/LJH

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

CABLE_1/8SS5000

Cable 1/8" 7x19 5000' Stainless Steel ** Price on request

PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

41A4813

LiftMaster Chain Pulley Bracket Kit

Fits chain drive models

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

R5205

Saddle Support for 4" Pulley

8 gauge galvanized steel

PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

OPH-6113-CONT-L

Manaras Opera-H 3/4HP 120V 1Ph with Mechanical Contactor Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

18-11379

LiftMaster Compression Spring

1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** NLA No Replacement

Base mount

7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-16-DO

Residential Wood Grain Side & Top W/S Dark Oak 16' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

1001-18-GREY

Commercial Side & Top Weather-Strip 18' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1013-1-1/4-12

Rigid Vinyl Bottom Retainer L-Shaped 12' Long

For door thickness: 1-1/4"

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

OPH-6112-ECB-LH

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

BP-BE102BP

Contact Block Base Mount NC Contact

For use with RC P enclosures. IP65

TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-18

Top Cap 1-3/4" 18 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

MK-00098

Micanan Boot for Cut-Out Switch

PB-BE101BP

Contact Block N/O Contact

Base mount
For use with RC P enclosures. IP65

HTRKITRSW

LiftMaster Self-Regulating Heater and Coil for RSW12V **DISCONTINUED

Protects system to -40F.
Installs into the operator frame
120V

.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MB-01102

Micanan Electric Motor Only 1/2HP 230/460V 3PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

5001-9-CHARCOAL

Residential Side & Top Weather-Strip 9' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

MAW123-BLK-RH

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

14 ft wide x 48" high
Mounting bar sold separately

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

30B530

LiftMaster Capacitor 56uF 220V ** discontinued

Same as LiftMaster # 30B620

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

1104-8FT-CLAYST

Residential Side & Top PVC Weather-Strip with cap 8' Long - Claystone

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

Thermal replacement glass only

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details