Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

  • This is a Whiting original roller
LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
E/0172/166

Automatic Systems Spring Assembly

GS-RA-01-BLACK

Guide Seal Reverse Angle Black Sold by the Foot

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

K72-12532

LiftMaster Output Shaft Kit J

  • Also known as: 308116010J 310-116010J 308116010JK 310116010J
  • Compatible with LiftMaster® Model J Commercial Door Operators
2237.1

Whiting Coldsaver Intermediate Panel 13-1/2" x 93-3/4" *** Price by Quote Only

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (10) sets of 2
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-258-144-L

Torsion Spring .319 x 2-5/8" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-L

Torsion Spring .283 x 2-5/8" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

  • Also known as: G233001 233001 23-3001
  • For use with various LiftMaster® Commercial Gate Operators
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
2200-886

Linear Sprocket 50B20 1" Bore

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-363-6-144-R

Torsion Spring .363 x 6" x 12ft RH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-6-R

Cut-to-Length Torsion Spring .363 x 6" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
CG-HOIST-SGLE-114

ControlGard Chain Hoist Single Compound 1-1/4" Bore

  • Cornell Single Compound hoists are designed for smaller doors
  • Features an integral braking system that only moves when the user is actively pulling the chain
236-110

Serco 3/4" Klip Ring ** Price by Quote Only

  • For Serco loading docks
ZAP-8830

Zap Battery Backup 8030/8830

  • 8830 Battery Back up systems allows operation of the operator during power outages.
4580-304-CHOC/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Chocolate Brown 458-19 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
4580-304-ALMOND

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Almond 458-11 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
GRX-138-U-WHT-10

Garex 1-3/8" Bottom PVC U Retainer White 120" (10ft)

  • Does not include the u-rubber
CBC14

Thimble 1/4" - 100 per pkg

59174.0265X91-1/4

Todco Original Counterbalance Assembly Special Order Price by Quote Only

  • Made to Order for Serial #30662431-1
K77-39425

LiftMaster Replacement Front Cover Panel Only for RSW12UL CSL24UL CSW24UL

  • This front cover does not include lock keys or back cover.
  • Grey
MC00005

Micanan Gear Reducer BHC 80 20:1 143TC

C-24-12-2-BLK

Thermal Window 24" x 12" for 2" Door Black

  • For 2" thick door
  • Square corners
50685

Doorlec Clutch Assembly for EHJ Incl. Pillow / Speed Bearings with Metal Housing

510.2996.05

Whiting Steel Roller Upgrade Option for 5 Panel DF Door

  • Upgrade option only - must accompany a door order
EHJ-353-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

  • Chain pack only
GH-321-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 230V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
K11-37823

LiftMaster Idler Shaft (1) SL595U

  • Fits SL595U
O02R9210

AirLift Bottom Cap Check Ball

1104-16FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Claystone

  • Claystone rigid vinyl retainer with claystone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
O17R1000

AirLift Inline Airline Dryer

510.4302.05

Whiting Stainless Steel Interior Hdwr Pkg 4 Rows Hinges 5 Panel

  • This is an Add-On option when buying a truck door
GAREX-PVC-W-10

Residential Side & Top PVC Weather-Strip with cap 10' Long (121") - White

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with snap-on cap to hide screws.
K77-39428

LiftMaster Replacement Cover CSW24UL

  • Cantilevered cover
  • Includes labels keys cam-lock assembly
  • Sliding-latch door for reset switch
  • Protects internal gate operator components from exterior tampering weather damage
SHAFT104

Manaras Clutch (Input) Shaft for Opera H

MA006

LiftMaster Mega Arm Chassis

  • Sturdy aluminum construction
  • For LiftMaster MADCBBC MATDCBB MASTDCBB commercial parking gate operators
2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

K77-36389

LiftMaster Hardware Kit LA500

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

2807.177.230

Whiting Spring Assby .177 x 2-3/16 x 23" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 23" Long
  • For Roadside order part # 2806.177.230
M-0131

Autogate Proximity (Limit) Switch

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

  • This isneeded to change over to their current motor
P-0129/RH

Autogate Retro Bracket Right Handed System

  • This is needed to change over to their current motor
7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

  • For 2" thick door
SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

K72-12591

LiftMaster Clutch Shaft Kit HMJ

SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

CH503L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
H-0168

Autogate VBelt Banded B-66

  • New Style Double Reduction
PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

  • Must specify if L-retainer is required
88573

Marantec Relay Power Board for M4500 Models

  • Same as # 83364
2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

  • Custom made to spec
C-334-114-INSTAL

Cones 3-3/4" Factory Installed (Pair) 1-1/4" bore

  • For do-it-yourself installation use part no. SF375-114
.406-6-L-C

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.363-334-L-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.273-258-R-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-334-L-C

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.262-2-R-C

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R-C

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7521U-L

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-10053-PNL

Micanan 1 HP 575V 3P Gearhead Operator NO CONTROLS

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-HHD-5021U-L

Micanan 1/2HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

  • Torsion spring wire only
  • .206 wire size
PRO-H-7543-U-RH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
MK-00706

Micanan Harness 3-Phase Contactor Board

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps