Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 6" Length: 12 ft
MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

  • Complete brake assembly including 460V solenoid
  • Solenoid cover is sold separately # MM00011
27-48-340

Extension Spring 8' Door - 340 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 340 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
K1D8080-1CC

LiftMaster Expansion Board for LA500DC

K72-12493

LiftMaster Limit Switch Kit

  • Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
  • For logic control MT BMT MJ MH MHS
HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
.331-6-LH-C

Torsion Spring .331 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 6" Length: 12 ft
9723S19

Whiting Pull Strap 19" with Stainless Steel Buckle

K77-12486

LiftMaster Parts Box for Model MT/ BMT

26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
2705.171_250

Whiting Curbside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
K74-31243

LiftMaster Kit SVC MOV

WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
    • .......more details
Programming Instructions
2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

  • OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
  • Part number has changed to 111663-3602
Programming Instructions
.437_6"-LH

Torsion Spring .437 x 6" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_2-5/8"-LH

Torsion Spring .343 x 2-5/8" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.207_2"-LH

Torsion Spring .207 x 2" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
1014-1-5/8-12'

Rigid Vinyl Bottom Retainer Notched 12' Long

  • Black - for door thickness of 1-5/8"
K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

  • Upgrade option only - must accompany a door order
15-48B10GXX

Sprocket 48B10T 0.750B

9281431440

Spring Wire .289 x 2.625 x 144" Coated RAW RH

  • .289 x 2-5/8" x 12'
LB910-24

Laminated Bumper Standard Black 10" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
541.3224.00

Whiting Outside Cam Lock w/Inside Release

  • An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG
K23-34822

LiftMaster Open/Close Switch

  • For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes
2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

BEARING033

Manaras 605 Ball Bearing 5/8"

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

  • This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
  • Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
  • Complete replacement kit includes: logic board adapter harness and installation hardware.
P40-10PFO

Hand Crank Reducer 107174

K18-10931

LiftMaster Compression Spring

  • Also known as: 187009 G187009 1810931 18-10931 18-7009
CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • Security+ 2.0®
  • Includes CPS-UN4
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

  • Compatible with LiftMaster® Model APT trolley Operator
.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.148*180
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
K1D7078

LiftMaster EMI Board

  • This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators
MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
.205-3.5-10-RHW

Mini Storage Spring .205 x 3.5" x 10" long Right Hand

LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
OTBH-6232-AE06

Manaras Trolley Operator 1/2 HP 208V 3Ph with NM Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
K20-1075B2LPH24

LiftMaster Electric Motor 3/4 HP 115V/208V/230V 1Ph Logic 5

  • Standard base mount 3/4 hp motor for new L5 operators
  • Also known as: 20-1075B-2LP K20-1075B-2P-H24 K20-1075B-2LP
K76-35664

LiftMaster RPM Module

K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

98EO626

Panic Bar for Pedestrian Door- Exit Only

  • Panic Bar for exit only
990TP626

Trim for Panic Bar 98EO626

  • Trim for Panic Bar - 98EO626
SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

  • Actual length is approx. 15'-6"
26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 6" Length: 12 ft
OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation ManualSell Sheet
K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

  • Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.
Installation Manual
K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
K-127A0112B

LiftMaster Chip Mega Arm

  • Also known as: K29-CHIP-535
SL585501UL

LiftMaster Industrial Slide Gate Op. 1/2 HP 115/230/208 Volt 1 Ph Heater NOT Incl.

  • Features a heavy- duty industrial lockable metal cover
  • MyQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Homelink® Compatible (version 4.0 and higher)
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access
    • .......more details
SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

2807.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Curbside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • For Roadside order part # 2806.139.130
2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

  • Activates one GRD gate receiver and up to three separate Delta-3 receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
  • Frequency: 310 MHz
    • .......more details
Programming Instructions
K76-34740

LiftMaster Limit Passpoint Kit

  • Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
  • For RSL12V RSL12VH
  • Aslo called Learn Limit Assembly Kit
9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

  • 41.25" long = 160 coils
.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_5-1/4"-LH

Torsion Spring .393 x 5-1/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-LH

Torsion Spring .331 x 5-1/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.295_5-1/4"-LH

Torsion Spring .295 x 5-1/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 5-1/4"
  • Length: 12 ft
NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction